Double Busbar Panel Dealers (39 products available)

• Type: Semi Automatic
• Frequency: 50/60 Hz
• Rated Voltage: 3.6kV, 7.2kV, 12kV etc.
• Digit Display: Single Display
• Rated Current: 630A, 1250A, 1600A etc.
• Warranty: 1 Year

Details : Double bus bar arrangement to receive incoming supply from two individual sources Auto / manual changeover between two supply sources

• Type: Over Panel
• Shape: Rectangle
• Application: Factories, Industries, Mills, Power House
• Color: Gray
• Frequency: 60Hz
• Connection Type: 4 Way, 6way, 8way
• Feature: Dust Proof, Excellent Reliabiale

The company is a prominent Manufacturer and Supplier of highly efficient Double Busbar Change Over Panel. It is offered up to a continuous thermal rating of 4000A and 3200A of top and bottom bus bars with a temperature rise far below the limits of IS requirements. Single front, IP: 52, 50kA, short circuit withstand capacity, and form IV separation are the standard features of our Double Busbar Change Over Panel. Furthermore, we make available bulk quantities of Double Busbar Change Over Panel at very nominal rates.

• Application: Protection & Control of Power Distribution
• Operational Current: 8000 A
• Operational Voltage: 415 V
• Rated Insulation Voltage: 690 V
• Ambient Temperature: 45�C
• Temperature Rise: 45�C
• Degree of Protection: IP:42 (Also Upto IP:55)

The Diversification of GEIPL towards Panel Board manufacturing is just another step towards company’s commitment of providing its clientele – greater variety of electrical solutions and thorough satisfaction. However being a related diversification for the company, its entrance into the field of sheet metal work hasn’t in any way hampered the Quality of production of other products. In fact with the help of a thorough professional and highly experienced team of experts, GEIPL has earned many laurels in this field also. The Panels produced by us are of the best quality and with perfection ever given.

• Material: Mild Steel
• Ip Rating: IP65
• Ambient Temperature: 0 to 50 Degree C
• Operating Temperature: -20 to 60 Degree C
• Relative Humidity: 10-95% RH
• Automation Grade: Automatic

• Application: Protection and Control of Power Distribution
• Operational Current: 6300 A
• Operational Voltage: 433V
• Rated Insulation Voltage: 690 V
• Ambient Temp: 45° Cel
• Degree of Protection: IP 54
• Configuration: Fixed

Low-voltage feeder pillars are a fundamental part of most public and many private distribution networks. The requirements and standards for feeder pillars have advanced considerably in the last ten years, and continue to do so with time switch based lighting control , motor control , gate control , sensor based building control & prtection .

e offer a wide range of double bus bar power distribution panel, which are available in different specifications and dimensions. These find application in diverse Industries and can also be customized to meet the exact application requirement of the customers. The distribution panel facilitates main incomer of electric board & generator with bus coupler enabling all the outgoing feeders can be run either on Electric Board Supply or Generator Supply and all so interlock is provided to avoid any clash between Electric Board Supply & Generator Supply. These are widely used in various industrial and building applications. LMVP 12kV double busbar panel The fixed metal-clad Enclosure comprises: A Control Cubicle in which the low voltage relays and instruments are fitted. Two busbar chambers segregated from each other and running the length of the switchboard. Each chamber supports one three-phase set of insulated high conductivity Copper busbars. A Current Transformer chamber from where the Measurement and Protection devices get their inputs. A Cable Box from which Power Cables are connected to the Transformer in the case of Incomers and Loads in the case of Feeders. A Voltage Transformer and its Housing may be incorporated so as to engage with the Circuit (Cable) or Busbars. A Circuit Breaker chamber into which the withdrawable part engages. The withdrawable Carriage normally carries a Vacuum Circuit Breaker. The Circuit Breaker is vertically raised/lowered to engage/dis-engage with the main busbars. The unit can be placed in either the FRONT BUSBAR or the REAR BUSBAR position. The Carriage is horizontally drawn-out or rolled-into the compartment.

We are offering our technically superior bus ducts. These bus ducts are required to facilitate transfer of high current, which can't be carried via cables on account of high losses occurring in them. So by using these bus ducts you can reduce your power losses. Depending upon the construction type, they can be divided in two parts- Conventional bus duct and Compact bus duct.

• Material: Mild Steel
• IP Rating: IP52
• Surface Finish: Polished
• Thickness: 2-6 mm

Double Busbar Panel is having two main busbar systems, separately for each power source like state power or captive power. Normally in double busbar scheme each circuit is connected to both the buses. In some cases half of the load can be connected and operated on each busbar, in these cases bus or circuit breaker failure would cause loss to half of the section. In double busbar arrangement two breakers are provided for each circuit to ensure the supply of power if any of sources fails. Double busbar and double breaker scheme provides high reliability in the case of fault. Flexibility of load management and load sharing of all critical loads. In a double bus bar system, the two different power sources are connected to two different buses. Say one bus is for DG Setpower another bus is for SEB power. Both the buses can be charged simultaneously and can feed any outgoing feeders. The outgoing feeders have flexibility of getting the power from either of the buses. Double busbar is more flexible and reliable.

We are offering our technically superior bus ducts. These bus ducts are required to facilitate transfer of high current, which can't be carried via cables on account of high losses occurring in them. So by using these bus ducts you can reduce your power losses. Depending upon the construction type, they can be divided in two parts- Conventional bus duct and Compact bus duct.

We are manufacturing Double Busbar Panel for industrial and textiles. Protection & Control of Power Distribution, Rated Insulation Voltage: 690 V.

Double busbar panel is having two main busbar systems, separately for each power source like state power or captive power. Normally in double busbar scheme each circuit is connected to both the buses. In some cases half of the load can be connected and operated on each busbar, in these cases bus or circuit breaker failure would cause loss to half of the section. In double busbar arrangement two breakers are provided for each circuit to ensure the supply of power if any of sources fails. Double busbar and double breaker scheme provides high reliability in the case of fault.

Double Busbar Panel, busbar system, Motor Control Center

We bring forth a range of double busbar panels that is available for up to 4000 a. This double busbar panel can be operated with less than 35o celsius temperature rise over an ambient of 40o celsius. Short circuit of these double busbar panels withstands capacity falls at 50ka. The non-segregated bus ducts with inter leaving design are aptly designed for indoor and outdoor installation with ip: 55o of protection. All our bus duct systems are type tested. We are pioneer in design, engineering & manufacturer of various types of bus ducts and bus trunking systems. why our double busbar panels? easy to usesafedurableeconomic

Double Busbar Panel, Siemens AC Drive, Motor Control Center Panel

Double Busbar Panel, fire control panel, Ht Panel, electrical drives

Bus Bar Panel, Main Power Panel, Mcc Panel

Bus Bar Panel, HT Cable Jointing Work, HT Installation Services

Double Busbar Panel, Ac Drive Panel, Electrical Feeder Pillar

double bus bar power panel, auto synchronizing panels, Motor Control Center

Double Busbar Panel for Motor Control, sandwich bus duct

MV Double Busbar Panel, motor brakes, HT VCB PANEL, Ups Panels

double bus bar panels, power panels, PLUMBING, Control Panels

Double Busbar Panel