Smith Therm Pvt Ltd. Giridih, Jharkhand

Thermoset rigid laminates are composite materials in the "plastics" family. Generally speaking, plastic materials can be classified as either thermoset or thermoplastic. By definition, thermoset materials maintain their dimensional stability at elevated temperatures while most thermoplastic material melt (or lose dimensional stability) at elevated temperatures

SmithHeat Strip Heaters are manufactured to your custom specifications. Our strip heaters feature a high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures. Nickel/Chromium resistance wire evenly wound provides for uniform and reliable heat distribution.

"An infrared heater is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation." The Infrared Quartz Tubes are designed for a couple of different heating applications and processes like toasters, room or patio heating or industrial drying. SmitHeat® Quartz elements provide medium-wave infrared energy with fast heat up and cool down with element temperatures ranging from 1000 °F to 2000°F. The elements produce infrared energy in the 2 to 3.5 micron range. Infrared heaters use either a fuel to heat an emitter, or an electrically heated filament as the emitting body. Filament is protected with a heat-resistant quartz glass tube. We offer both clear and satin (translucent) quartz. Clear quartz radiates about 95% of the infrared energy directly, whereas satin quartz absorbs about 35% of the energy and radiates it at a longer wavelength. We also offer quartz element with reflective coating of different material like Gold, Silver. For this diverse range of applications, various connectors can be installed at both tube ends. Infrared Quartz Tubes are available as light or dark emitters and generally designed for horizontal assembly. Through constructive adoptions it is also possible to operate them in a tilt or vertical position. Following are the different kinds of Filament used as per requirement::- Tungsten Filament Ni - Cr Wire Filament Carbon Filament Applications:- Shrink Packaging Equipment Film Processing Printing Dryers Automotive Paint Dryers Process Heating Food Cooking and Warming Comfort & Spot Warmers Vacuum Forming

We are offering pe film mica tape. Firwo ® pj5460-f pe film mica tape for fire-resistant wire & cable, a band-shape electrical and thermal insulating material, consist of phlogopite mica paper banded to supporting materials of pe film, impregnated with high temperature resistant silicone resin. Details :- 1. Highest dielectric strength 2. Higher tensile strength for high speed winding or lengthwise wrapping 3. More excellent flexibility

We offer Heating Element. The product line open wire heating elements are mainly used for the heating of gaseous media. SmithHeat Open Wire Heating Elements exhibits very effective heating with high efficient power usage. The Alloy wires are in direct contact with the gaseous media, due to which the transmission of heat requires no-time. The alloy wires are wound in the mica sheets. These wire wounded mica are joined together in series or parallel to achieve the required specification and assembled with thermal cut-outs, Thermal fuse, Thermostats etc.

The product line open wire heating elements are mainly used for the heating of gaseous media. SmithHeat Open Wire Heating Elements exhibits very effective heating with high efficient power usage. The Alloy wires are in direct contact with the gaseous media, due to which the transmission of heat requires no-time. The alloy wires are wound in the mica sheets. These wire wounded mica are joined together in series or parallel to achieve the required specification and assembled with thermal cut-outs, Thermal fuse, Thermostats etc. The heating element principally consists of Mica insulation plates, stainless steel frame and heating spiral. Heating elements for Laundry Dryers with air guide channel made of galvanised material for laundry dryers with ceramic spiral carrier stones, 2 steps at 230 V up to maximal 3000 W, available with different temperature limiting systems. Technical Option :- Additional insulation plates in the metal housing Cable receptable systems and housing Cable protecting sleeves and seals Integral temperature setting Mica supported spirals Spirals alo available mica supported or glas fibre cord supported Fan heater with axial fan :- The appliance has a round "Zig-Zag" element with carrier frame for motor mounting. The heating element has an integrated cut-out. The "Zig-Zag" coil is riveted to two MULTIMICA® rings. Fan heater for the warming of air according to the convection principle :- The heat coil is inserted standing freely in a carrier plate made of MULTIMICA®. The coils have two sides and have an enlarged distance. Through higher surface charge, a more inexpensive device construction is possible. These standard elements contain an open heating spiral supported by a ceramic unit (3 spirals). According to the safety standards, the spiral can be filled with a fibre glass cord. This cord hinders the heating spiral from being deformed at high impact or (in case of a break down) to get in contact with other metal parts. Height of the air escape in mm: 36 (35), 31, 2 Length in mm: 84, 122, 182, 242, 302, 362, 424, 484 Fitting blowers: ebm-Papst: QLK 45, QLZ 06, QLD 6

SmithHeat® open coil elements are the most efficient and economically feasible for almost all heating applications. It consists of open circuits that heat air directly from the suspended resistive coils and is designed such for low maintenance and inexpensive replacement parts. Our open coil heating elements are typically made for duct heating, forced air & ovens and for pipe heating applications, also it is used in tank and pipe heating and/or metal tubing. SmithHeat also specializes in designing and manufacturing custom heating solutions to fit your needs.

Smithmica® mica v- rings are made by using high quality mica splitting based, alkyd vinyl bonded to various drawings and specifications manufactured by bonding several layers of multi-segmental milled micanite sheets in a moulding press. Our mica v-rings are uniformly tough in all portions and when tapped slightly with a wooden hammer the material gives a ringing metallic sound.

We offer mica paper base. The electrical, mechanical and thermal properties of mica make it the best insulation material in the earth. The mica scrap and waste is used to make reconstituted mica paper, which is used to make different kinds of electrical and thermal insulation material. The properties of mica mineral are retained by using mica paper with different bonding agents like, epoxy and silicon. The bonding agent are used as per requirement of application.

Mica Based Heating Elements Mica based Heating elements are very popular in commercial in commercial bottom plate is very thick to give pressure .

We are one of the leading manufacturer heating elements for domestic appliances and for industrial applications. We are o.e.m suppliers to some of the well-known home appliance brands globally.

We offer mica sheet. Smithlamina gasket mica sheet is a tanged stainless steel reinforced mica sheet comprises of mica layers with a central tanged stainless steel reinforced mesh or foil. The high performance smitherm® gasket mica sheet is manufactured by using high quality phlogopite mica paper for high temperature resistant and stainless steel 304 grade for high mechanical strength.

Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. . There are numerous advantage of etched foil heating element such as rapid heating, reliable and durability for almost every applications. It consists of etched foil resistive element which is laminated between two layers of insulation material. It can be shaped in any design and can be easily fitted due to its flexibility and design. Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options. Etched- foil heaters are so personalized that virtually any application could be satisfied.     Applications :- Storage Tanks, Low temperature ovens, Heat Tracing systems, Humidity control systems, Heated tabletops, Food service equipments, Wall radiant Heating, Epoxy Curing Equipment, process Vats and dip tanks, Water and feed throughs, conveyors, refrigerator Defrost, Fluid line Freeze protection, Medical and laboratory devices, Satellite and communications, alternative to direct immersion.

We are offering decorative micanite sheet. Smithlamina decorative micanite sheet is specially manufactured for decoration of windows, interiors and lampshades. Due to the crystalline layer by layer structure of natural mica it reflects the light in a spectacular view. Natural mica splitting is bonded with various binding agents with the pigments to make sheet in various colours.

We offer mica roll. Smithlamina composite mica roll is made by using high quality muscovite, phlogopite or synthetic mica paper with one side or both sides backing with different material as per requirement and needs. The glass cloth, ceramic felt, and nomex are mainly used as backing material. It contains both mica and ceram to own good insulation and isolation functions. The silicon binding agent provide high strength and h class insulation which enables to use this product in broad range of products.

We offer bobbin heater. Smithheat ceramic bobbin heaters are made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic bobbin heater consists of 8020 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end.

SmithHeat Ceramic Bobbin Heaters are made with sheathed and without sheathed material. The sheath material ranges from nickel plated mild steel, copper, nickel plated copper to stainless steel. Ceramic Bobbin Heater consists of 80/20 nickel chrome resistance wire supported on refractory insulators and connected to a terminal block at one end. Ceramic Bobbin Heater offers a large surface area to heat liquids or semi-solid materials such as water, oil, wax, fats, and bitumen. These heaters are mainly used for direct heating of air and indirect heating of liquids and gases where the element is fitted into a pocket in the process tank or system so that the element may be replaced without draining down the system or vessel. Installation :- We manufacture Ceramic Bobbin Heater for any voltage or wattage within manufacturing limits. Heater can be supplied with suitable mild steel or stainless steel pockets and mounting flanges or bosses is required. The element allows easy installation and handling. They are normally manufactured for horizontal mounting, but may be specially designed constructed for vertical installation. These are energy efficient as 100% of the heat is generated within the solution. The versatility is that this type of heating unit gives simple, low cost installation.

SmithHeat Cartridge heaters consist of a cylindrical stainless steel tube which provides high corrosion prevention and there is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards. The specially formulated Magnesium oxide is utilized inside the heater is transformed into a rock-hard, highly efficient heat transferring medium through a special cold forming process. Cartridge heaters can withstand tough industrial usage; they can transmit up to 200 watts/in² heating capacity and are able to attain up to 1500°F sheath temperature. Cartridge heaters can be dual-voltage, three-phase, and/or supplied with a ground terminal and with different termination styles, mounting attachments and various optional features. Cartridge heaters are robust and easy to install. In order to facilitate installation and heat transmission, cartridge heaters are made 0.1 mm less than the nominal size of the receptacle hole with a tolerance of +/- 0.05 mm. Standard SmitHeat® cartridge heaters are supplied with electrical leads that are connected internally. Apart from our broad standard range we also develop and manufacture cartridge heaters according to your exact specifications required. Industrial Applications for Cartridge Heaters:- SmitHeat® high-density cartridge heaters are widely used in numerous high temperature industrial applications such as, in plastics industry cartridge heaters are used in hot runners to temper during injection moulding processes. Other areas of applications for process heat are die-casting or continuous casting in which zinc or aluminium is processed. Following are some of its industrial applications :- PLASTIC MOLDINGS PACKAGING EQUIPMENT HEATING TANKS PLASTIC EXTRUDERS LABELLING MACHINERY AIR AND LIQUID HEATING

Smithheat cartridge heaters consist of a cylindrical stainless steel tube which provides high corrosion prevention and there is a heating wire inside which is wound onto a ceramic core. The number of coils varies depending on the power. In order to avoid short-circuit, the cartridge heater is filled with magnesium oxide and compressed afterwards.

Smiththerm Band Heaters are computerized designed and manufactured to your specifications. Only the highest quality materials are used for optimal performance...  

We offer foil heater. Etched foil heaters have standard sizing and can also be made to custom designs. Stock heaters include pail, drum, tote and gas cylinder heater as well as heat tapes. Some hard to heat application, however require custom heaters with flexibility, resistance to wear reliability and cost effectiveness. With no order minimum and the ability to choose material, size, voltage, wattage, cutouts, attachments options and built in controlling options.

We offer Electric Irons. SmithHeat Electric Iron elements are specially made for commercial and residential press Irons. The construction of heating element is made in a manner to provide uniform heat to the Irons bottom plate. The heating elements are connected to thermostat to provide different heat to different kinds of fabrics during pressing. Also, the working life of these kinds of heating elements is very important to avoid regular replacement and inconvenience to end users.

SmithHeat® thick-film technology enables our application engineers to create innovative heating solutions. Our thick-film heaters are compatible with numerous substrates including: Aluminium, Stainless Steel, Mica, Glass, Industrial Fabric, Quartz and Kapton. The Mica and Aluminium based heaters are low profile as they have superior thermal response, exhibit uniform heat distribution and allow significant versatility and design flexibility.

We are offering mica blocks. Knife dressed sheet mica of a minimum thickness of 0.18 mm (0.007 inch), is called block mica or mica blocks. Block mica is obtained in size as large as 30 to 35 cm. Sq. (12 to 14 inches sq) beyond which is practically rare and far too expensive. It is available in sheets with an average thickness between 0.18 - 0.75mm (0.007 - 0.030 inch). Block mica is supplied both in natural (random) and calibrated thickness as per customers demand.