Sri Kailash Controls Choolai, Chennai, Tamil Nadu

• Used to secure wire, cable, or tubing to wood surfaces • Barbed design holds mount in place – rated for 60 lb. pullout .

Insert between fingers of wiring duct • Contains wiring when cover is removed from duct

Wireless from the sensor to the network Modern wireless technology offers efficient and consistent communication for all industrial applications.

• Effective protectionDo you want system operation to be unaffected by interference? Then surge protection is an essential requirement.

Integral mount pushes onto a threaded stud and tie wraps around bundle • Mid-mount style (PLST_SC) centers the wire bundle over the stud • Tie can be removed from the stud by turning counterclockwise • Releasable style available (PRST) • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation • Heat Stabilized material for high temperature applications up to 239°F (115°C) – indoor use • Heat Stabilized Weather Resistant material has greater resistance to damage caused by ultraviolet light and for high temperature applications up to 212°F (100°C) – indoor or outdoor us

For use with standard cross section cable ties: PLT1S, PLT1.5S, PLT2S, PRT1.5S, and PRT2S • Integral retaining notch holds cable tie head in place below bundle • Eliminates protruding tie head and facilitates one hand tie threading • Quickly route wire and cable where mounting holes cannot be drilled • Rubber-based adhesive provides a strong and reliable bond • For indoor use only • Material: ABS .

The shielded wiring duct routes, separates, and shields sensitive wiring from noise emission • Up to 20dB noise reduction, 90% noise voltage reduction (up to 6 inches air space) • Lead-free PVC with metallic foil finish • UL recognized continuous-use temperature – 122°F (50°C) • Provided with mounting holes • Base and cover length is 6 feet • Use with Type C cover (purchased separately)

neoprene face sealing washers • shake proof washer • earth tag washer

Low profile design holds wires, cables, and tubing • Convenient releasable latch • Large mounting base for high bonding strength • For indoor use only .

Benefit from the full rangeNo need to look any further: you will be completely satisfied with our extensive and consistent range of relay modules..

Combines cable tie, mount and fastener into a single part • Used to attach bundles to another surface such as a flat panel • Anchor is easily pressed into a pre-formed hole and locks in place • Wings provide constant tension for a stable, secure and rattle-free installation • Stainless steel locking barb provides consistent performance, reliability and infinite adjustability through entire bundle range • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation • Materials available for indoor or outdoor use .    

Cables are easily snapped into or out of clips • Winged design holds mount in place even in applications where vibration is present • Design of wing provides added stability .

PCB terminal block, Nominal current: 26 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 1, Connection method: Screw connection with tension sleeve, Mounting: Wave soldering, Color: green Product Features Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  The latch on the side enables various numbers of positions to be combined

Greater resistance to damage caused by ultraviolet light and for high temperature applications up to 212°F (100°C) – indoor or outdoor use • Unique design allows tie to secure a bundle directly to a chassis or panel without the need for separate fasteners or mounting devices • Releasable prior to final tensioning for bundle modifications • Engages clearance hole with optional centering pilot to prevent tie from shifting or abrading in high vibration environments

FU/SSU – flexible steel conduit & fittings • LFHU – flexible coated steel conduit & fittings • FB – flexible steel conduit with overbraid & fittings • LTP/LTPHC/LTPUL – liquid tight flexible coated conduit & fittings • FSU/FNU – flexible coated steel conduit & fittings • FSB – flexible coated steel conduit with overbraid & fittings .

• nickel plated brass plated steel, stainless steel nylon metric, black or grey nickel plated brass nylon PG, black or grey

• Use as a wrap around label or flag style labels for wire/cable labeling • Conformable material for general identification; excellent print quality • Temperature range: -40°F to 180°F (-40°C to 82°C)

Provides a larger surface on small fiber cables and allows legends to be clearly seen • Sleeves are made of flexible PVC material • Locate sleeve on straight section of cable at least 2 inches from fiber boot .

Configuration plug ID-PLUG, necessary to configure the Wireless-IO modules Versatile M5 to M58 circular connectors, data and photovoltaic connectors as well as modular rectangular and heavy-duty industrial connectors: the comprehensive connector range from Phoenix Contact offers a huge variety of solutions for industrial and semi-industrial applications. Your advantages • Numerous possible applications, thanks to a large number of types and modular systems • Maximum reliability, thanks to the outstanding level of quality and expertise • Innovative and time-saving connection solutions for devices with all the usual degrees of protection associated with industrial use • High degree of flexibility, thanks to customer-specific adaptations • Expert design-in support from product specialists

Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Parallel-entry cable tie that threads like a belt (180° entry) • Wide tie body provides high tensile strength • 50% lower head height than conventional 90° ties • Parallel-entry limits exposure to sharp edges and protects workers' arms/hands • Outside teeth protect cable jacket and wire insulation • "Finger grip" shaped head with serrations assures positive grip while threading tie • Install by hand or use Panduit GTH installation tool • Flexible – easy to handle and install • Available in UV weather resistant colors for color coordination and UV stability

Flexible polypropylene material • UL Recognized continuous use temperatures up to 149°F (65°C) • UL94 Flammability Rating of V-2 • Factory applied adhesive tape provided for easy positioning Note: Adhesive tape is not meant for permanent mounting of wiring duct. One mounting hole on each end will be exposed for permanent mounting with fasteners. For best results, wiring duct should be applied to clean, dry, grease-free surfaces. We recommend the surface be cleaned prior to wiring duct installation.

Optional locks for use with FRME Rack Mount Enclosures and FWME Wall Mount Enclosures • Spool provides for organization of fiber cords in a variety of applications

Elastic material provides a flexible tie body that safely contours around cable bundle to prevent over-tensioning of data cables to maintain network integrity • UL 94V-0 material provides greater flame resistance and meets stringent telecommunication flammability requirements (i.e. NEBS GR-63-CORE) • Greater resistance to damage caused by ultraviolet light - indoor or outdoor use • Soft material has no sharp edges to protect the installer and cable bundle for improved jobsite safety and reliability • The high coefficient of friction material provides a tight grip and prevents lateral movement along cable bundle, minimizing overall installation time and potential re-work • Releasable design allows release and re-use to accommodate frequent moves, adds, and changes to support evolving equipment and cabling needs • Halogen-free, non-toxic and environmentally safe material will not release toxic or corrosive gases upon combustion • Locking head design; the tapered tip tail threads into locking head to speed productivity; industry-accepted, intuitive tie design .

A fast and economical method to secure and separate two bundles • Reduces part number inventory – single part covers multiple bundle sizes • Installs easily by hand – second loop can be installed with Panduit cable tie installation tools • Material availability for indoor and outdoor use or high temperature applications