SUBTLEWEIGH ELECTRIC (INDIA) PVT.LTD. Gopalpur, Kolkata, West Bengal

sweipl, in collaboration with saet, italy offers weigh feeders to feed bulk solids continuously to the process . The weigh feeders –dprc & dpn are suitable for installation directly under the silos in industrialized environment with light & heavy duty conditions respectively. The former has been designed to handle small size granulated material whereas the latter can cater to a complete range of material size. high quality measurement and control electronics allow both convenient operation and extensive monitoring, assuring high accuracies of feed. Belt weigh feeders are able to control in continuous mode, the flow of the discharged material maintaining the instantaneous flow rate constant with respect to the set rate. The weight is measured directly at the weighing zone sensed by a centrally placed weighing idler which is placed on two numbers of high precision, international class load cells having high resolution strain gauges of minimum displacement (0.1mm). A digital tachometer detector generates the signal in proportion to the speed of the belt.the device is supplied complete with a command and control cubicle, equipped with our electronic weighing system ws200/d series. the belt load and speed signals are routed through the microprocessor based weighing and feeding controller, where they are processed and an actual feed rate is continuously compared with the set rate (set point) to assure that the belt speed is controlled such that the feed rate is maintained at a constant level throughout. Precision attained is superior to ±0.5% of the set flow rate. The weighing systems compensate the apparent density variation within a range of ±30%. The supporting structure of the weigh feeders may be so designed to be an integral part of the fairing that encloses the machines. As this guarantees completely dust tight protection so pressure proofing, if needed, is possible. the closed ring vulcanized rubber belt can be easily replaced without requiring the disassembly of the machine components. Automatic belt tracking prevents disruption to process by belt running askew. Belt drift, if any, is monitored with the aid of opposite limit switches. gravity take ups assure constant but tension preventing belt slippage & overworking.to improve performance a speed sensor is installed at tail pulley to detect belt slippage if any. Two prevent belt contamination and tare changes an adjustable scrapper outside the belt, while a plough defector inside the belt has been used as a suitable design for belt cleaning system. The plough deflector prevents belt destruction due to foreign objects jammed between belt and pulley. Available on request are sundry solutions with the use of scrapes, collecting screw feeders, hoe scrapers. options:1. Fairing2. Special scrapper3. Feeding hopper4. Conveyor belt with containment edges5. Second weighing bridge (for dpn only)6. Prefeeders – feed hopper, star feeder, shaker etc (for dpn only) for each bulk material the right feed hopper /prefeederfeed hopper for free-flowing materialvibrating hopper for sluggish materialsstarfeeder for flushing materialsfeed gate for fluidized materials

The Weigh Feeders –DPRC & DPN are suitable for installation directly under the silos in industrialized environment with light & heavy duty conditions respectively.High quality measurement and control electronics allow both convenient operation and extensive monitoring, assuring high accuracies of feed. Belt weigh feeders are able to control in continuous mode, the flow of the discharged material maintaining the instantaneous flow rate constant with respect to the set rate.

SWEIPL brings to its customers Mass Flow Meters for the continuous measurement or feeding of free flowing bulk solids, from pulverized to granulated. Installation of Mass Flow Meters are the best solution especially when environmental conditions i.e. too much dust formation demand a closed system or when constrained by space or too high material temperature utilization of other system are ruled out . The MFM is based on reactive force and has a curved chute to guide the flow of material. Deflection of the particle flow generates a reactive force proportional to the instantaneous flow rate. Chute deflection due to radial acceleration, is detected by a maintenance free strain gauge type load cell. This signal is then electronically processed by microprocessor based Control System WS200/C + WD200 to produce flow rate and total weight value at accuracies better than ±2% & with repeatability of 0.5%. Flow rate 30-600tphMaterial Temperature 0-260˚CLoad cell Strain gauge typeaccuracy better than 2% AREAS OF APPLICATION·Chemical Industry·Food Industry·Fertilizers Industry·Metallurgical Industry·Power Station·Environment Industry·Cement Industry·Building Industry TYPICAL EXAMPLESTo measure free flowing bulk solids such as Cement, Fly Ash, etc during Load Out.To measure recycles from Cement Grinding Mills when the measuring signal may be used to control the addition of fresh material.To feed Raw Meal to Heat Exchanger or Rotary Kiln in Cement Factories.

Belt Weighers BW90 and BW200 which have been designed especially for dynamically weighing a complete range of solid materials on a belt in severe industrial environments. The special construction, both compact and economical, of Belt Weighers is based on the most recent evolution in the field of load cells. The Belt Weighers are made up of a mechanical mono block structure preassembled and fully prepared for installation without having to carry out changes in the existing structure. The weighing bridge is made up of a single or double idlers that weigh directly on a highly precise and linear load cell.