Sudhan Electromech Pvt. Ltd. Saswad, Pune, Maharashtra

Thyristor Based Real Time Power Factor Correction Panels   Additional Features of RTPFC System   Real time power correction (RTPFC) panel with  microprocessor    intelligent APFC relay and zero cross over voltage switching • Compartmentalised & Non compartmentalised design • Available in 4 / 6 / 8 / 12 step from 50 to 1000 KVAR • Design as per customer requirements • Switching device - Thyristor • MPP / APP / MXD capacitor • Response time in second • Rapid switching & no limit of no. of operations • Better heat dissipation • Suitable for rapid changing load • Trouble free partitions

MPP Capacitors are manufactured using imported Zn-Al Metallised Polypropylene film with reinforcement. This special construction enables capacitor to withstand higher switching surges. In case of Oil filled capacitors assembly is done in CRCA container and impregnated with NPCB oil. For dry type capacitors assembly is done in aluminium can containers and are impregnated with polyurethane resin wax. These models have pressure interrupter arrangement for safety against bursting Both designs are available in normal duty and heavy duty applications.

Frequency : 50 HZ / 60 HZ

UDHAN' Mixed Dielectric Capacitors - MD Capacitors are manufactured using one layer of tissue paper and one layer of plain Polypropylene film as dielectric between two electrodes of thick soft annealed, 99.35% purity of Aluminium foil and have extended foil construction. Power leads are soldered to the extended portion to make a strong and positive electrical contact which can withstand Heavy inrush and discharge current. Capacitors are impregnated with NPCB, bio-degradable impregnant and are hermetically sealed. Three layers of Impregnating oil adds to dielectric strength, increase protection against failure and provides cooling effect.    

  Compensation for momentarily changing load required automatic & manual free operation. SUDHAN will provides you the automatic PF correction panels of enhanced quality. Nature of load will decide Contactor or Thyristor based Power Factor Correction Panel will suit to your requirement. Use of microprocessor based intelligent controller helps to take action about electrical network status with fine RMS measurement and take complex decision of connection and disconnection of capacitor banks to maintain targeted power factor.   Features of Contactor Based APFC Panels • Standard Voltage range : 415 / 440 VAC • Available in 4/6/8/12 step from 50 to 1000 KVAR • Microprocessor based intelligent APFC Relay • Switching device - contactor • Compartmentalized and non-compartmentalized designs • APP / MXD capacitor • Response time in seconds • Low loss & better heat dissipation • Suitable for steady load • Trouble free operations

  Single Layer Design - 'SUDHAN' APP Capacitors are manufactured using Double Hazy Double Thick Polypropylene films as dielectric between two electrodes of thick soft annealed, 99.35% purity of Aluminium foil and have extended foil construction. Power leads are soldered to the extended portion to make a strong and positive electrical contact which can withstand Heavy inrush and discharge current. Capacitors are impregnated with NPCB, bio-degradable impregnant and are hermetically sealed. Impregnating oil adds to dielectric strength and provides cooling effect.

Double Layer Design - 'SUDHAN' APP Double Layer Capacitors are manufactured using two layers of Polypropylene films as dielectric between two electrodes of thick soft annealed, 99.35% purity of Aluminium foil and have extended foil construction. Power leads are soldered to the extended portion to make a strong and positive electrical contact which can withstand Heavy inrush and discharge current. Capacitors are impregnated with NPCB, bio-degradable impregnant and are hermetically sealed. Three layers of Impregnating oil adds to dielectric strength, increase protection against failure and provides cooling effect.