Trade Link Bhavnagar, Gujarat

GST Number : 24AFUPM3030P1Z0
Contact Supplier Request A Quote
  • Water & Fuel Testing Kits

    Water & Fuel Testing Kits

    Request for Price

    We offer Water & Fuel Testing Kits for water analysis so that the boiler and cooling systems remain in good shape. The Water & Fuel Testing Kit comes with a number of measuring devices for calculating density and other factors to ensure proper bunkering practices. The Water & Fuel Testing Kits can be purchased at reasonable price from us.Important Considerations Measure density and water content to calculate the mass of fuel delivered - see also the Info Centre. Ensure the fuel is within the required specification under ISO 8217, Viscosity, Density, Water, CCAI, Compatibility, Pour Point, Salt, etc. Maintain fuel samples for Port State Inspection under MARPOL 73/78 Annex VI.   Fuel Testing Products with Quality & Quantity  Density : Fuel is delivered from the bunker barge by volume and confirmed by meter or tape soundings. It is paid for by mass with a conversion relying on an accurate density reading. The density meter provides that and more. CCAI, Density in Vacuo and Viscosity conversion. Viscosity : Viscosity in conjunction with density is the defining parameter for fuel grade. Variations outside of the viscosity limit can often be accommodated with prior warning.  Simple, robust and accurate indication of fuel viscosity at 50°C and 100°C. Calculate CCAI and convert between viscosity units. Water & TBN Test : Why pay for water in your fuel?  Maximum water contamination limits are established in ISO 8217 and can be easily checked with several water test options available from Kittiwake.  You can also use this test to verify purifier performance and check you lubricating oils. Compatibility : Mixing and blending fuels is often a necessary process but can lead to a whole world of difficulties. Asphaltimes become unstable and fall from solution blocking purifiers and filters. A simple test for single or blended fuel stability and following accepted ASTM test methods.   Cloud Point : Not often an issue with commercial ships but a serious consideration foe military vessels or those venturing in to arctic waters without tank heating. Also used to verify suitability of winter grade diesel fuels. Developed for the UK Ministry of Defence, identify single or multiple wax points in clean distillate fuels. Flash Point : Refinery QC or contamination with light diesel fractions will lead to depressed flash point. Off specification fuels are a reason for debunkering and need to be treated carefully. Another rugged and accurate On-Site test aimed at identifying problems before they become expensive.   Pour Point : This is probably the easiest test to undertake without purchasing specialist equipment, even ours. Keeping a low pour point fuel warm and using it quickly will prevent sludging in tanks and blockage of lines when operating in temperate climates.   Fuel & Lube Test Cabinet : A 15 year history in the Fuel market monitoring both in-service lubricants and Industries fuel deliveries. A single cabinet containing tests selected with an accuracy appropriate to the application. Simple to use, rugged test equipment and none hazardous consumables.  

    ...more
    Get Best Price
  • Polyurethane Epoxy Paints

    Polyurethane Epoxy Paints

    Request for Price

    Polyurethane Epoxy Paints impart long-lasting polyurethane finish to the surface. The Polyurethane Epoxy Paints are formulated by incorporating innovative technology. They impart atmospheric, durable finishes to all atmospheric vessel and Industrial areas. We can provide Polyurethane Epoxy Paints in different packaging quantities.Independent ApprovalPolyurethane Epoxy Paints  has been tested to meet, and exceed, the highest international standards, such as ISO 12944, and NORSOK M501.Certified by DNV as a paint system with low-flame spread in compliance with IMO Solas and Marine Equipment Directive (MED).Features Finish coating for decks, superstructure, and topsides Suitable for application at new-build, in dry dock and for onboard maintenance High gloss with up to 10 years’ durability Non-chalking and non-yellowing Excellent application properties with minimal overspray Cures at temperatures down to -5°C (23°F) Unlimited recoatability Resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals Benefits Excellent application properties by spray application, roller and brush Durable for up to 10 years – less maintenance costs Flexibility of use – simplifies stock lists Easy to apply – less time, more productivity Fast drying – reducing maintenance downtime Unlimited recoatability Outstanding gloss retention – easier cleaning Reliable and proven track record

    ...more
    Get Best Price
  • Oil Filters & Machinery

    Oil Filters & Machinery

    Request for Price

    Oil Filter is designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Oil Filters are used in many different types of machinery. The oil filter is also used in internal-combustion engines in motor vehicles. Other vehicle hydraulic systems, such as those in automatic transmissions and power steering, are often equipped with an Oil Filter of some type as well. We offer a range of Oil Filters & Machinery. The Oil Filters & Machinery have changed over the years. Early designs used steel wool, wire meshes, metal screens, etc. Latter bulk cotton or various woven fabrics like linen were used. When disposable filters became popular, cellulose and papers were used to minimize production costs. Finally "synthetic" media oil filters were introduced where special man made fibers are utilized.  Fiberglass and metal fabrics are also sometimes used for oil filtration. Today, most low-cost disposable spin-on oil filters use cellulose filter media. Better quality oil filters use synthetic media, while top end oil filter use "MicroGlass" or extremely fine metal mesh.MaintenanceMaintenance is the largest single controllable expense in a manufacturing plant. With as many as 80% of all machine failures related to contamination in the oil, pro-active methods are saving industries considerable costs every year. We offer an introduction to the problems with insufficient oil cleanliness, the causes and the remedy of the problems. All the information presented is generally known and accepted. We invite you to take advantage of the experience we have gathered over the past 50 years with oil maintenance within various types of applications. The perfect oil cleaning system will control the level of all types of contaminations. We offer wide range of Off- Line Filters, By-pass Filters, Online Filters and several other Oil Filters & Machinery.Advantages Large filter surfaces, long service times Precisely defined grades of filtration Systematic removal of filtered particles Precise backflushing device Low flushing quantities Backflushing without interrupting operation Low pressure losses Low maintenance Low operating costs Long life time Compact, space-saving design Oil Filters & Machinery Available :CJC Filters, Boll & Kirch Filter, Finn, Fleetguard ADN Parker etc.Please feel free to get the product data sheets.

    ...more
    Get Best Price
  • Heat Resistant Paints

    Heat Resistant Paints

    Request for Price

    Heat Resistant Paints are single component, high temperature coatings, based on moisture curing silicone binder. On offshore facilities, there is a continuous demand for coatings that maintain their performance despite exposure to a variety of environmental conditions and various temperature fluctuations from the substrate. The Heat Resistant Paints are high performance coatings that effectively meet the latest requirements of the offshore industry. The coatings can be applied on pipes and steel surfaces as well as on process equipment. The Heat Resistant Paints protect the steel from the influences of thermal cycling, which is one of the extreme challenges faced by coating systems. For the protection of steels from corrosion on areas including flare stacks, chimneys, exhausts, vents, and pipework temperature up to 600°C. Some of the most challenging coatings situations that exist in industry today concern heat resistance. There is a continuous demand for coatings that can maintain their function despite exposure to the extremely high operational temperatures found in the power, offshore and petrochemical processing industries. We offer a range of high quality, Heat Resistant coatings developed specifically to meet this challenge, able to cope with extremes of temperature and deliver a dependable long-term performance for both new construction and maintenance alike.Highlights Heat resistant moisture curing silicone Aluminium Pigmented finish Applicable in wide range of temperature One component   Heat resistant on SA 2.5 blasted Steel Heat resistant on ST3 powertool cleaned steel No post-cure required Directly application on metal or zinc silicate primer ApplicationsThe product is widely used in all key industry sectors, meeting the very demanding challenges required to protect major assets. All our coatings are manufactured in compliance with world-leading standards. Therefore, you can rely on a consistent performance from each and every coating. The application areas of Heat Resistant Paints are: Petrochemical : Piping, Heat Exchangers, Process equipment, Maintenance etc. Power : Piping, Stacks, Process equipment etc. Offshore : Piping, Heat Exchanger, Maintenance, Flare Stacks, etc.

    ...more
    Get Best Price
  • Food Grade Epoxy Paints

    Food Grade Epoxy Paints

    Request for Price

    Avail from us Food Grade Epoxy Paints that have low viscosity. The Food Grade Epoxy Paints result in 100% volume solids epoxy coating. Our specially formulated Food Grade Epoxy Paints comply with SSPC paint 42 specification. They are applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc.When used as part of approved scheme, this material has following certifications Food Contact  -  Carriage of Grains ( NOHA ) Food Contact   - FDA Compliant : Dry Foodstuffs Tested for non-contaminations of grain cargo  at the Newcastle Occupational Health, Great Britain Theoretical Spreading Rates 3.9 m²/litre - 200 micron 3.9 m²/litre - 200 micron 154 sq.ft./US gallon - 8 mils 154 sq.ft./US gallon - 8 mils Flash point : 35°C/95°F 35°C/95°F Introduction to Food Grade Epoxy A low viscosity,  100% volume solids epoxy coating Compliant with SSPC paint 42 specification Applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc. Flexibility in application – can be applied directly over tightly adherent rust, old coating, oily, condensed & splash zone surface. Can be used underwater for wrapping of piling, jacket legs & variety of substrates Properties of Food Grade Epoxy 100% Solid Epoxy Coating '0' Volatile Organic Compound Food-grade certified '0' Flame spread Applicable directly on difficult surfaces, viz. Stainless Steel, Aluminum, Galvanized Iron etc. Examples of Applications As a protective coating for structures in harsh environment Condensation structure / piping Online high heat application (≤ 150°C) Underwater piling, jacket legs, risers GRE/GRP piping FRP strengthening As a Metal Filling Compound (MFC) (≤5mm) Oily bilge wells / pump rooms / engine room Concrete & concrete repairs As a floor-coating – also for "Clean Room" applications "Happy to inform you that we stock and trade in this Food Grade Epoxy Paints, we have observed visually and found satisfactory paint which was applied on condensate surface lines at our premises”Food Grade Epoxy Paints – an innovative 100% solid multipurpose epoxy coating : Meets & exceeds the requirements enlisted in SSPC Paint 42 specification 100% solid epoxy – no solvents added – “0” VOC Specially formulated for multipurpose use in offshore environment No stringent requirements for surface preparation – can be applied on tightly adherent rust Equally good performance even when applied on oily or damp surfaces Applicable directly underwater without any modifications Can be used along with wrapping tapes underwater for extra protection to risers, piling, structure etc. Along with Zirconium (added externally), can be used as a Metal Filling Compound Food grade coating – DNV certified – applicable for internal lining of Potable water tank Class “0” rated fire retardant Applications Crude, product & potable water storage tank linings Ballast tank coating where surface preparation may be an issue Bilges, pump rooms etc. where there is a high possibility of oily substrate High temperature application (up to 150 deg. C) Engine shell coating Sweating lines – can be applied directly without shutdown Risers, jackets, piling – for underwater application GRE & FRP repairs & restoration Self-levelling floor coating – Sterile grade

    ...more
    Get Best Price
  • Fire Resistant Epoxy Paints

    Fire Resistant Epoxy Paints

    Request for Price

    We offer two types of Fire Resistant Epoxy Paints – water based Fire Resistant Epoxy Paints and solvent based Fire Resistant Epoxy Paints. Water Based Fire Retardant Paints Flame Control No. 20-20A is a Class "A", interior, low VOC, water base, flat latex, fire retardant paint, manufactured in accordance with Federal Specification TT-P-001932. This coating dries quickly to a flat finish, having the appearance of a conventional flat latex paint. In the presence of heat or flame the coating puffs up (intumesces) and forms a thick, sponge like cellular foam layer; this foam layer insulates the substrate reducing the penetration of heat, thus retarding the flame spread and delaying structural failure.Recommended Uses & Used By For application to all interior combustible surfaces where it is either necessary or desirous to reduce the surface burning characteristics of the substrate. Schools, Colleges, Nursing Homes, Child Care Centers, Hospitals, Penal Institutions, Apartments, Hotels, Factories, Warehouses, Retail Stores, Restaurants, Utilities, Railroad and other Transportation Companies, Oil and Chemical Installations, Military Installations, and other facilities wherefire retardant coatings are required.Performance InformationFire Hazard Classification, ASTM E-84 (NFPA 255), Class “A”, Class "A" fire rated. Complies with federal, state, local building and fire code requirements. Dries by water evaporation to a tough, flexible, matte finish.  Does not leach (lose fire retardancy) on exposure to high humidity. Meets all VOC regulations, including SCAQMD. Spreading Rate : 155 sq. ft./gal. (3.8 m2/L) applied in one or two coats 10.4 mils wet, 4.8 mils dry V.O.C. : .0.41 lbs./gal. (49 g/L) Volume Solids : 46% ± 2 Weight Solids : 59% ± 2 Drying Time @ 77°F & 50% RHm To touch : 30 min. To handle : 1-2 hours To recoat  : 2 to 4 hours Type of Cure : Coalescence

    ...more
    Get Best Price
  • Acid Resistant Epoxy Paints

    Acid Resistant Epoxy Paints

    Request for Price

    We offer Acid Resistant Epoxy Paints that are concentrated sulfuric acid resistant. The Novolac Epoxy Coating For Concentrated Acids is based on advanced coating formula. Typically, the Acid Resistance Epoxy Paints Coating is a two - component, rigid, novolac epoxy coating with excellent resistance to concentrated sulfuric acid, other strong acids and bases, and many chemicals found in industrial environments. When seeded or blended with aggregate, it can be used on properly prepared concrete and steel substrates to provide a chemical resistant surface with excellent slip/skid resistance and wear characteristics. This product is ideally suited for use in containment areas requiring resistance to strong mineral acids, Acid Resistance Epoxy Paints will bond to prepare dry and damp concrete substrates and cures to a tough, blush free, tile like surface. When used outdoors, the coating is freeze/thaw resistant and will not embrittle, however it will acquire a chalky surface when exposed to sunlight. The standard color is concrete gray (tan gray).Features Convenient 2:1, by vol. mix ratio Fast cure for short downtime Cures to a tough, blush-free, tile-like surface Bonds to dry and damp substrates without primer Does not embrittle when exposed to direct sunlight Resistant to most strong mineral acids and bases Environmentally safe - 0 VOC solvents Limitations :  Do  not  apply  on  wet  substrates.  Minimum installation and cure temperature is 50°F. Apply after daily substrate temperature has peaked. Substrates on or below grade must have a functioning vapor barrier to minimize the potential for blistering or delaminating of the applied coating. Broadcast aggregate must be resistant to the chemicals used in the exposure area and must be completely encapsulated by a topcoat. Exposure to 98% sulfuric acid will cause formation of a reddish surface film that can be removed by washing with water. Do not add solvents or otherwise thin this material.Packaging & Colors : Package sizes of Part A + Part B are 3 and 15 gallons. Standard color is tan-gray; black, white and brick red custom colors available.Shelf  Life :  Three  years  minimum  in  unopened,  original containers when stored between 60 and 90° F in a dry place away from sunlight. Remixing of components may be required upon long-term storage.Surface Preparation : Concrete surfaces may be dry or damp (not wet) though dry substrates are preferred and must be sound and free of all bond-inhibiting substances. Prepare surfaces in accordance with ASTM D 4259 or ACI 503R and ChemCo Systems' specific recommendations. Cleaned concrete surfaces should have a minimum strength of 250 psi in direct tension. Steel surfaces should be cleaned to "white metal" according to SSPC SP 5.Mixing : Acid Resistance Epoxy Paints is a two-component system. The resin to hardener (Part A : Part B) mix ratio is 2 :1, by volume. Read all material safety data (MSDS) information before handling the product. Wear safety glasses and clean neoprene rubber gloves when handling the materials. Premix the individual components before use. Transfer appropriate quantities of Part A and Part B into a mixing container. Use quantities that can be applied before the pot life of the mixed material expires. Blend thoroughly using a Jiffy mixer blade attached to a low speed (350 - 750 rpm) electric or pneumatic drill. Proper mixing will take 2 - 3 minutes. In cold weather, pre-conditioning the components to 70-85°F will allow easier mixing and application.Installing : The recommended applied thickness for floor and wall coatings is two coats minimum at 6 - 8 mils per coat. Apply in multiple thin coats rather than one thick coat using a stiff bristle brush, short nap roller, squeegee or two-component spray equipment. For optimum chemical resistance, 3 coats are recommended. Subsequent coats may be applied as soon as the previous coat is “touch” dry (6 - 7 hr @ 70°F). Avoid excessive cure times between coats. The recommended applied thickness for floor surfacings is single or multiple coats at 20 - 30 mils per coat. Pour mixed material onto the substrate and spread to the desired coverage with e V-notch trowel or squeegee. Aggregate, if used, must be broadcast onto the coating within 15 minutes of application. The recommended aggregate size is #20 x 40 or #30 x 50 mesh. Typical aggregate broadcast rates are .75 - 1.50 lb/sq ft.Clean up : Excess mixed product is best removed from the work area end tools before it hardens. Use of rags and solvents such as acetone or heavy-duty detergents facilitate cleaning. Cured product may be removed from tools by soaking in an epoxy stripper.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 2011
  • Ownership Type Individual (Sole proprietorship)
  • GSTIN Number 24AFUPM3030P1Z0

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Trade Link markets Heavy Fuel Treatment Chemicals, Distillate Fuel Treatment Chemicals, Boiler Water Treatment Chemicals, Cooling Water Treatment Chemicals Pool Water Treatment Chemicals, Water Treatment Chemicals, Cleaning & Maintenance Treatment Chemicals, Water & Fuel Testing Kits, Food Grade Epoxy Paints, Acid Resistance Epoxy Paints, Polyurethane Epoxy Paints, Heat Resistance Paints, Fire Resistance Epoxy Paints, Oil Filters & Machinery for maintenance and improved performance.
Read More »

Contact Information

Trade Link

  • Masani Shahnavaz S.
  • Plot No. 1129, Hari Khushal Complex, Rubber Factory Road, Bhavnagar, Gujarat
top