Silicone Rubber Heaters Dealers in Udaipur (6 products available)

• Voltage: 12 V to 600 V AC or DC
• Length: 1 to 78 inches
• Thickness: 0.056 Inch
• Width: 1 to 36 inches
• Watt Density: 80 W/in2
• Wattage Tolerance: +5, -10%
• Operating Temperature: -70 to 450 °F
• Maximum Temperature: 500 °F or 260 °C
• Lead wire: 12 inch Teflon insulated

• Length: 1 to 120 inches
• Thickness: 0.056" standard, other thicknesses available
• Width: 1 to 36 inches

Famously known as “flexible heaters”, silicone rubber heaters are composed of fiberglass reinforced silicone rubbers that are rugged, moisture and chemical resistant, flame retardant, have high dielectric strength and are non toxic. Wire or etched foil heating circuits are positioned between two “wafers” of silicone which provides flexibility and strength. Design versatility permits zones of higher or lower heat concentration as needed. They are capable of flexing and will conform to contoured surfaces. They can also be pre-formed to complex shapes and can withstand mechanical shock and vibration. Designed to meet the requirements of various low and medium temperature applications, they improve heat transfer; speed warm ups, and decrease wattage requirements. The silicone fiberglass-reinforced silicone rubber gives the heater dimensional stability without sacrificing flexibility. Thermostats or rtd can be mounted for temperature control. Teflon lead wires can exit any location to make suitable connections. different mounting methods such as pressure sensitive adhesive, field applied adhesive, velcro etc. Are available according to the requirement.

• Voltage: 12V to 600V AC or DC
• Thickness: 0.056" standard, other thicknesses available
• Maximum Temperature: 500 °F

Famously known as “flexible heaters”, silicone rubber heaters are composed of fiberglass reinforced silicone rubbers that are rugged, moisture and chemical resistant, flame retardant, have high dielectric strength and are non toxic. Wire or etched foil heating circuits are positioned between two “wafers” of silicone which provides flexibility and strength. Design versatility permits zones of higher or lower heat concentration as needed. They are capable of flexing and will conform to contoured surfaces. They can also be pre-formed to complex shapes and can withstand mechanical shock and vibration. Designed to meet the requirements of various low and medium temperature applications, they improve heat transfer; speed warm ups, and decrease wattage requirements. The silicone Fiberglass-reinforced silicone rubber gives the heater dimensional stability without sacrificing flexibility. Thermostats or RTD can be mounted for temperature control. Teflon lead wires can exit any location to make suitable connections. Different mounting methods such as pressure sensitive adhesive, field applied adhesive, Velcro etc. are available according to the requirement.

Silicon Rubber Heater, Viper Coil Heater, Nozzle Heaters, Mica Strip Heaters

Silicon Rubber Heater, Mica Band Heater, High Watt Density Cartridge Heater