Wastewater Treatment Equipment Dealers (676 products available)

We are offering water treatment equipment. Reverse osmosis element dow filmtec offers a variety of low energy, high rejection, and fouling resistant filmtec™ reverse osmosis elements designed for industrial water demineralization. reverse osmosis removes up to 99% of total dissolved solids. ro membranes remove dissolved impurities such as chloride, lead, chromate, fluoride, bacteria and others. The nominal rejection characteristics of thin film membranes. bw30 elements provide longer life due to increased resistance to fouling and high cleanability. le & xle elements reduce operating costs due to lower energy requirements. fouling resistant elements reduce cleaning requirements and operational cost ilec™ interlocking elements are available in some models and offer the following benefits: reliable and long-term seal integrity – the single, non-sliding seal reduces the number of potential leak sites and is evenly compressed upon installation. leak-tight performance – the ilec design eliminates the possibility of o-rings being rolled from their grooves or pinched and damaged during operation. lubricant-free operation – omission of o-ring lubricant to preserve permeate quality, such as in ultra-pure water applications, will not compromise sealing performance. backward compatibility – compatibility with existing hardware is maintained. The smooth inner bore located at each end of the permeate collection tube is unchanged, permitting insertion of sliding couplers and existing vessel adapters. The net length of the elements, when connected, remains 40 inches. reduced permeate pressure drop – internal couplers and vessel adapters account for more than 70 percent of the permeate-tube pressure drop in some systems. The interlocking endcap design minimizes these restrictions, imposing less permeate back pressure.

We manufacture & supply all categories of DM plant, Ozonation, filter press, Centrifugal decanter, sludge dewatering systems available. As per requirement we also supply tailor-made solutions to our clients.

• Capacity: 500-1000, 1000-2000, 2000-3000, >3000
• Automatic Grade: Manual
• Number Of Filtration Passes: >5

We are an eminent organization engaged in manufacturing, supplying, trading, wholesaling, distributing and exporting a quality-approved range of Wastewater Treatment Equipment. The offered range of equipment is manufactured following industry laid norms and guidelines. Our quality controllers inspect this equipment on certain parameters of quality.   Features Highly efficient Low maintenance cost Outstanding performance  

Our company’s name figures in the list of top Manufacturers, Exporters and Suppliers of Water Treatment Equipment from Tamil Nadu (India). The Water Treatment Equipments that we offer are manufactured using high-grade raw materials and cutting-edge technology under the supervision of our experts. They are customer friendly, performance oriented and in compliance with the international standards. Look for us, to get the Water Treatment Equipment at the most reasonable prices. Features : Cap-100 to 50,000ltr/hr Skid mounted Customer orientated Operational friendly Details : We can provide 100 ltr to 50,000 ltr/hr system for fine filtration, pre treatment for RO unit and post treatment of dm silica removal

We design manufacture and export all types of water and waste water treatment equipment. They include reverse osmosis, ultrafiltration, nano filtration as well as waste water treatment equipment such as clarifiers thickeners aerators etc

• Automation Grade: Automatic
• Application: Industrial And Wastewater Dewatering

Carboxylate polymers are one of the important and key raw materials to be used in industrial water treatment like boiler, cooling circuits, RO plants, desalination and in sugar evaporators etc. These polymers are used for scale prevention and dispersants of insoluble solids for water treatment industry. We manufactures various carboxylate polymers like homopolymer, copolymer, terpolymer, multipolymer and polymaleic acid for antiscalant application. These polymers are synthesised in a fully automatic plant through precisely control process to provide optimum inhibitions. Apart from supply our application team not only ensures the performance of each and every material but also provides technical assistance to our customers regarding application of the product and formulations.    Synonyms : Polyacrylic Acid (PAA) 50%, Polymaleic Acid (PMA), Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS), Sulfonated Polyacrylic Acid Copolymer, AA-AMPS copolymer, acrylic acid sulphonated copolymer, acrylic acid terpolymer, acrylic polymer in primary form, acrylic acid homopolymer, acrylic acid copolymer, Polyacrylic acid,

• Brand Name: Ecoklien,Ecoklien
• Driven Type: Electric
• Color: Grey, Green
• Condition: New
• Country of Origin: India
• Warranty: 1 Year
• Country of Origin: India
• Automatic Grade: Automatic
• Warrenty: 1year

Description: Biomedical Liquid Waste Treatment System uses a hybrid advanced electrocoagulation and electrooxidation cells for treatment of biomedical liquid waste generated from hospitals and clinical laboratories. The system is simple and easy to operate. The system does not use any chemicals for treatment. The treated effluent is safe for discharge into public sewerage. Product Specification Capacity (KLD) 500 KLD Application Industry Hospital Power Source Electrical Inlet Flow Rate(m3/day) 500 m3/day Usage/Application Clinical,Blood&Urinal Testing Lab and Hospital Laboratories Material Of Construction Stainless Steel Control Module Available Automation Grade Automatic Deliver Type Outside India Treatment Stages Primary Treatment, Secondary Treatment Warranty 1 Year I Deal In New Only Color Green Country of Origin Made in India Minimum Order Quantity 1 Product Description  Biomedical Liquid Waste Treatment System uses a hybrid advanced electrocoagulation and electro oxidation cells for treatment of biomedical liquid waste generated from hospitals and clinical laboratories. The system is simple and easy to operate. The system does not use any chemicals for treatment. The treated effluent is safe for discharge into public sewerage.   Additional Information Delivery Time 45days (time vary by location of buyer) Production Capacity 100 set per month Packaging Details palletized wooden box  

The demand for water dispensers and distributors is growing steadily and is linked to the need to drink safe and high-quality water while decreasing the environmental impact. The Nespl Group offers a wide range of Equipment & Spare Parts product to meet the requests of individuals, businesses and public administrations. All systems are designed to enhance the natural features of the water and ensure maximum safety and sustainability.

Located in Faridabad(India), the company has carved a niche for itself in the market with its flawless range. Maintaining the set industrial standards, we make sure that the range is as per the requirements.

Based in Vizianagaram(India), we are listed amidst the most celebrated names offering a spectrum of products. We have online payment processing system to avoid security issues. In order to make it more reliable, we have maintained payment logs accessible for the convenience of our customers.

Premium grade, cost-effective prices and unsurpassed standard distinguishes our Wastewater Treatment Equipment from others in the marketplace. Based in Uttar Pradesh(India), our organization is involved for years in supplying the finest grade of Wastewater Treatment Equipment in the industry.

• Color: GREEN
• Usage: Clinical, Blood & urinal testing Lab and Hospital laboratories
• Name: BIOMEDICAL LIQUID WASTE TREATMENT
• FEATURES: Meeting treated effluent standard for safe discharge
• POWER: Three Phase 380 V / 415 V
• CAPACITY: 0.6 / 1.2 / 2.4 m3 / day
• WARRANTY: ONE YEAR
• TECHNOLOGY: Advanced Hybrid Electrochemical based effluent treatment system

Biomedical Liquid Waste Treatment System uses a hybrid advanced electrocoagulation and electrooxidation cells for treatment of biomedical liquid waste generated from hospitals and clinical laboratories. The system is simple and easy to operate. The system does not use any chemicals for treatment. The treated effluent is safe for discharge into public sewerage.   MODELS   MODEL   TREATMENT CAPACITY (L/DAY) RT ECO BML - 6 600 RT ECO BML - 12 1200 RT ECO BML - 24 2400   Ø For other Commercial models contact company directly   RT ECO – Biomedical Liquid Waste Treatment System is hybrid electrochemical systems that are compact, eco-friendly and effectively eliminates biomedical pollutants and harmful pathogenic organisms such as bacteria and viruses. Hospitals, clinical laboratories and other biomedical liquid waste treatment facilities equipped with RT ECO – Biomedical Liquid Waste Treatment System for treatment of their effluent could meet the effluent discharge standards and regulations and also safeguard the environment from spreading of harmful diseases.   Medical Waste-waters (Hospitals, Biomedical Labs, Blood bank liquid wastes) are contaminated with pathogens, such as bacteria, viruses, and parasites, human/nonhuman primate or other animal cells, diluted blood and tissue fluids, plasma, as well as hazardous chemical compounds, pharmaceutical compounds, and radioactive isotopes. Medical Industry, healthcare facilities equipped with RT ECO – Biomedical Liquid Waste Treatment System meets the standards and regulations, maintains effective water management and wastewater treatment solutions.

• Automation Grade: Semi-Automatic
• Type: Horizontal Flow, Solids Contact
• Industry: Paper Mills
• Treatment Capacity: 0 - 500 m3/hr
• Tank Diameter: 20 m, 10 m, 50 m
• Bridge Width: 1.5 m, 1 m

Features: Low capital and operational costs Continuously self-cleaning Totally integrated Minimal maintenance Stable operation Space saving and low foundation costs High quality clarified water Simple installation Superior performance High chemical efficiency   Applications: Pharmaceuticals Slaughter houses Heavy metals removal Membrane system Paint shops Jute mill effluents

• Brand Name: Scale Aqua
• Application: Heat Exchanger & Condenser
• Features: Non Chemical, No Power , Inline Unique
• Usages: To Eliminate Scaling
• Industry Type: Plastic Industry, Ice Factories, Cold Storages, Milk Dairies Etc.

Scaling:  Scaling occurs when a mineral film coats the entire heat transfer surface of Heat exchanger OR Condenser.   These mineral deposits such as Calcium, lime, Mud and rust rob heat transfer efficiency. This increases energy cost by over 30 %.   Heat Exchangers, Condensers and even Cooling Towers therefore require DESCALING maintenance to improve their efficiency. Evaporative Condenser: When water scale is deposited on the heat transfer surface of an evaporative Condenser, the cooling water from the spray head can not efficiently condense the refrigerant gas in the coils.  As a result inadequate cooling , over worked machinery and expensive operation is incurred.   Shell & Tube Condensers: Water scale deposits in the condenser coils cause the compressor to kick out on high head pressure and lowers the cooling capacity of the unit.   Cooling Towers: Basic principle of Cooling Tower is to cool the water that has picked up heat generated by equipment within facility.  Cooling tower design enhances evaporation & allows further cooling of tower water. This water is then pumped into the facility continuing to cool the equipment Scaling within cooling tower can restrict the water distribution of spray nozzles, reduce the water flow thru the openings of a hot deck and restrict the air flow within the tower. All these conditions result in diminished cooling capacity & inefficient operation of the associated equipment in the cooling tower system.   Absorption Units: Water scale accumulating on the water side of Absorbers & Condensers materially affects the operation and efficiency of any absorber type Air-conditioning unit. The harder the water, the faster the deposit accumulates.   Scaling of Plastic Molding  Machines : Cooling is an important process in the production of injection  mold To molders, scale, caused by calcium in hard water, is a devil that forms as    Water flows through pipes, contaminating and clogging lines throughout a plant. When scale builds up in the pipes and heat exchangers on a molding machine’s hydraulic system, it causes poor heat transfer, which prevents molders from running their machines at full capacity. Similarly, when scale clogs mold cooling water passages , it creates a thermal barrier that hinders the cooling and heating of the mold. All of this adds up to wasted machine time and money. Injection molding machines are typically run at about 65 to 75 percent of their fastest cycle times because of poor heat transfer. It takes just a 1/16-inch-thick build up of scale to cause a 15 percent slowdown in a machine’s cycle because it takes longer to extract the heat. A uniform cooling process is desired to avoid defects in manufactured parts.   How to Get Rid of Scaling : Scale can not be removed by hydro blasting or typical scrubbing. The only reliable way to remove these scales is by   Descaling Agent . A Descaling agent or chemical descaler is a chemical substance used to remove limescale from metal surfaces in contact with hot water, such as in boilers, water heaters, and kettles. Descaling agents are typically acidic compounds such as hydrochloric acid that react with the alkaline carbonate compounds present in the scale, producing carbon dioxide gas and a soluble salt.  Notable Descaling agents include acetic acid, citric acid, glycolic acid, formic acid, phosphoric acid, sulfamic acid and hydrochloric acid. Descaling process needs to be done frequently Chemicals are used. So additional expenditure. Plant shut down is required resulting in loss of production. Softening plant is required. Costly man power required. All this can be eliminated by using SCALE-AQUA , a unique online non chemical No power Descaling equipment.   Advantages of Scale Aqua Installation : SCALE-AQUA, prevents deposition of hard scale in the heat transfer area. SCALE-AQUA, is fitted in existing pipeline with absolutely no changes in the pipeline. SCALE-AQUA is tested at water hardness of 5,000 PPM & TDS of 20,000 PPM  SCALE-AQUA, gives excellent water saving. SCALE-AQUA is an online equipment which is fitted just before evaporative condensers, Heat Exchanger (PHE) , and Boiler, coil, Compressors, Chilling plants.

We are a leading manufacturer of a complete range of bottled water equipments under one roof on turn key basis.

etp plant.

We are care chem enterprises dealing in lab- materials,api's chemicals,reagents, solvents, indicators, glass wares, plastic wares porcelain wares and laboratory scientific equipment and setup of all laboratories with good quality materials at minimum possible price. we also deal with operation theater setup, aseptic room make up and maintenance and clean room with cabinet (air blower) aseptic garment racks. we believe in good quality product supply with minimum lower possible cost. it will be our pleasure. If we could help you to provide maximum product service with best quality at minimum cost we will fill proud if you order us for better surveillance of your best institute industry. assuring you of our continued commitment to provide quality products and services and our desire to contribute significantly towards success of your plans and activities, we remain.

• Installation Service: Yes
• Automatic Grade: Automatic

we are offering bioculture for ETP/STP. It is the most advanced microbial product to bring about a revolution in wastewater treatment. The technology balances the microbial activity there by increases the efficiency of treating water at the least possible cost. As a result, the industry is able to get clean water, which can even be recycled for non-potable uses, reduction in foul odour at minimal cost. The salient features are: it is a group of selective microbes responsible for treating wastewater naturally. It is a consortium of various microbes like lactic acid bacteria, photosynthetic bacteria, actinomycetes and yeast with a plate count of > 25 million. The microbes are facultative. They exhibit both aerobic and anaerobic characteristics. The microbes are cultured in a selective medium which contains various nutrients and herbal extracts to support the microbial population. It works in variable scenarios and extreme conditions such as different ph, temperature and salt concentration. These microbes are naturally isolated & none of them are genetically modified. Benefits: helps meet cpcb norms much more stringently in terms of bod, cod, tds, ph, tss, total and faecal coliform count. Operational costs in terms of aeration, chemical dosage and sludge removal cost reduces. Foul odour is suppressed very fast. It helps enhance the capacity of a plant to treat wastewater by 15-20%. Startup time for a new or a seasonal plant can be reduced at least by half. Wastewater can be recycled without any fear of contaminating ground water & it can be utilized for non-potable uses like irrigation, floor cleaning etc.

Equipments forRemoval of fluoride, Arsenic, cadmium,urenium,iron, chromite etc. Domestic, commercial, industrial and community base

• Automation Grade: Automatic

The product range, which extends from pressure regulators up to air dryers and multi circuit protection valves, contributes to the functional safety of pneumatic systems. Additionally, we offer the Air Processing Unit (APU), which combines all the functions of an air dryer and a multi circuit protection valve in one device. APU´s are available as a flanged solution or as an extremely compact monobloc version for reduced installation space. The compressed air produced by the compressor must be dried and cleaned before being distributed to up to seven different brake and subsidiary circuits. These circuits must be filled with up to three different pressure levels and secured against each other in order to fulfill reliably the highest safety demands in traffic.