Mounted Switches Dealers in Vadodara (6 products available)

Level Switch : Level Sensor

Magnetic level switch : Side and Top Mounted Level Switch

We are offering side mounted magnetic level switches. “kabir” make magnetic level switches is specially suitable for high and low level signalization or automatic level control (by starting & stopping pumps or opening & closing of valves) in vessels. Horizontal mounting type directly on vessel or on external chamber. Compact & rugged construction consisting of a free moving pivoted float assembly and a switch enclosure in non - magnetic material to achieve undisturbed magnetic flux. It employs dual magnets, one carried by the float arm and other by the contact carriers housed in the switch enclosure. A change in liquid level brings the like poles of dual magnets opposite to each other and resulting repulsion force ensures a changeover of contacts with snap action. The magnetic transmission is glandless, leaving no scope for leakages from vessel into switch housing. These switches are manufactured in various materials, enclosures & special features to suit broad range of media applications. They are designed to provide high repeatability and to minimizes effects of shock, vibration & pressure. Installation:- mounted internally or externally through a chamber. External mounting is resorted to, where space is a limiting factor or mechanical devices like stirrers operate within the tank. Besides, in applications like boilers, reaction kettles etc., with external mounting, isolating is possible for regular servicing. The switch is normally side-mounted, however for applications like slurry, top installation is preferred. The switch can be wired directly "to make or break electrical circuits", of burners, heaters, motor pumps, alarms and other such electrically operated devices. Wetted parts: moc : s.s.316s.s.304 p.p switch : reed switch micro switch having no+nc+c 230 vac connection : flanges , screwed

Mounting Options : Top Mount

Switch Type : Reed switch (SPDT / SPST)

Enclosure : Pressure Die-Cast Aluminum

Process Connection : Flanged / Threaded

Material of Wetted Parts : AISI 316 SS

Switch Rating : 0.5A

Ingress Protection : IP 67

Max Operating Temperature : 100 Degree C

Max Operating Pressure : 10 Bar

Min Specific Gravity : 0.7

MOQ : As per Requirment

The purpose of this guide is to provide a general resource for the selection of materials for the magnetic flowmeter. One of the advantages of the electromagnetic flowmeter is that it is suitable for a wide variety of applications including severely corrosive chemicals and highly abrasive slurries. The key to this versatility is that there is a large choice of materials available for the electrodes and the flowtube liner.

We provide premium quality Side Mounted Magnetic Level Switch, which is widely used for indicating or controlling the level of liquid in tanks or vessels. Our Side Mounted Magnetic Level Switch has been termed as the best available in the market because of it can effectively control the overflow of tank. Specialty : Accurate indicating or controlling the level of liquid in tanksHi-low level signals for alarm annunciationTank overflowing prevention mechanismControls dry running pumpsMinimum 50 Nb flanged to any sizeWeather proof (ip-65) or flame proof to IIA, IIB as per CMRS Dhanbad approved

The VEKSLER TOP MOUNTED FLOAT LEVEL SWITCH (TLS-19) is highly reliable and a low cost instrument. It can be used for small tanks as well as large vessels depending upon individual customer's requirement.It consists of a guide pipe made from SS 304/SS 316, a magnetic float of SS 316 that moves on the tube with rise and fall of level. Hermetically sealed reed switches are housed in the guide pipe. The switches can be fixed at any position through out the length of the pipe. But the position should be defined at the time of order as it cannot be changed at site. The factory set accuracy is +/-5mm. Since it works on magnetic principle, there is no mechanical connection and hence the chances of any wear/tear, fluid contamination are eliminated.The process connection is 3” NB Flange as per ASA 150# or any other standard as per individuals requirement. The Floats are hydro tested to work at 15 Kg/cm2. Floats for higher pressure can also be supplied. The working temperature is 90 Deg C.These are very useful for Diesel/Furnace Oil Day tanks and are supplied with IP65/EX-PROOF Gr 11A & 11B enclosures. The other applications include vending machines, small tanks, pumping stations, water tanks. Optional Relay units are available for higher current ratings.It can be wired with low load; however high resistive/inductive loads should be connected in series through control unit. This instruments is PC/PLC < DCS, Alarm Annunciator configurable. Very reliable yet a low cost instrument +/- 5mm accuracy Available in Single & Multiple Floats Hermetically sealed magnetic switches at pre fixed positions in the guide pipe Reed Switch Operation, 1, 2, 3 or 4 different positions 2" / 3" MS Flanged connection as per ASA 150# or as per customer's requirement Can be wired directly with low load, use control (Relay) unit for high resistive/inductive loads Available in Ex-Proof Gr IIA & IIB/Weather proof connection box Max. Pressure Upto 20 Kg/cm² and 80 Deg C temperature Custom designed to your exact guide length and float dimensions Side mounted bracket available for easy installation in open tanks / sumps PC/PLC/DCS, Alarm Annunciator configurable Also Available in External Cage Type Flame Proof/Weather Proof Connection Box Guided Tube : SS 304/ SS 316

Top Mounted Level Switch work on permanent Magnet Reedswitch basis. The floats which contain permanent Magnets move freely between their stops rising or falling with Liquid level movement. Hermetically Sealed within the tube are reed switches, Completed isolated from the medium. The Magnet's field actuated the reed switch as the float moves while the Stoppers restrict overrun and prevent the reed switch returning to its original position. Stopper positions should not be changed.