Silver Brazing Alloys Dealers (38 products available)

We make available Cadmium Bearing Silver Brazing Alloy which is acclaimed for its make & long service life. We make it much easier for you and thus, we have electronic payment system that will make transactions with complete security. Rest assured us for all the payment issues. One of the major concerns of the organization is to make available only quality approved products to the buyers and thus we check the entire range at all stages.

• Diameter: 4 - 8 cm
• Brand Name: Zenith
• Length: 0.5 - 2 m
• Surface Finished: Polished
• Minimum Order Quantity: 1000 Unit

• Length (mm): 500
• Size (mm): 3.15, 2.5, 2.0, 1.6
• Weight: 1 Kgs

Silver Brazing Alloys are easy to use, possess high strength impact with short melting ranges, free flowing and versatile. They have outstanding flow characteristics and mechanical properties. These are available in forms of wire, foils or shims, preformed wires or strips, granules, rings and paste or powder. Besides, these can be customised as per clients specifications and applications.

• BS: BS-1845

We are offering silver brazing alloys, silloy ncd / sn / si ag brazing flux silloy 9999 ncd 99-100 silmux - t silloy 9092 ncd 90-92 silmux - t silloy 6770 ncd 67-70 silmux - t silloy 6366 ncd 63-66 silmux - t silloy 5861 ncd 58-61 silmux - t silloy 5356 sn-ncd 53-56 silmux - g silloy 5659 sn-ncd 56-59 silmux - g silloy 5659 sisn-ncd 56-59 silmux - g silloy 4346 sn-ncd 43-46 silmux - g silloy 4346 sisn ncd 43-46 silmux - g silloy 4346 ncd 43-46 silmux - t silloy 4245 ncd sp 42-45 silmux - t silloy 4244l ncd 42-44 silmux - g silloy 3841 ncd 38-41 silmux - g silloy 3639 ncd 36-38 silmux - g silloy 3335 sn-ncd 33-35 silmux - g silloy 3235 ncd 32-34 silmux - t silloy 2831 sn-ncd 28-31 silmux - t silloy 2831 ncd 28-31 silmux - t silloy 2326 ncd 23-26 silmux - t silloy 2224 ncd sp 22-24 silmux - t silloy 1820 si-ncd 18-20 silmux - t silloy 1619 si-ncd 16-19 silmux - t silloy 1618 ncd 16-18 silmux - t silloy 1012 ncd 10-12 silmux - t silloy 406 ncd 4-6 silmux - t silloy 406 si-ncd 4-6 silmux - t silloy 102 si-ncd 1-2 silmux - t silloy 101 si-ncd 0.5-1.5 silmux - t.

• Brand Name: Cuprosil
• Silver (Ag) %: 43.00 +- 1
• Copper (Cu) %: 16.00 +- 1
• Zinc (Zn) %: 20.00 +- 2
• Cadmium (Cd) %: 21.00 +- 1
• Solidus: 615 Degree Celsius
• Liquidus: 620 Degree Celsius

• Material: Bronze
• Brand Name: Saru Silver
• Product Type: Customized

• Material: Metal
• Diameter: 60-70mm
• Thickness: 10-15mm
• Certification: ISI Certified
• Application: Fittings
• Grade: BS, IBR, IS
• Feature: Corrosion Resistance, High Tensile

Details : One of the lowest melting point. Silver Brazing alloys available. It has excellent flow characteristics. The highest joint strength can be obtained with this alloy. Has Better resistance to corrosion in chlorine, sulphur and steam environments. Lowest brazing temperature range of the BAg filler metals. It also flows more freely info narrow clearance capillary joints. Its narrow melting range is suitable for rapid or slow methods of heating. This has the shortest melting range of any silver brazing alloys. This alloy is regarded as the best brazing alloy by manual brazers. It is particularly recommende where a minium brazing temperature is desirable to preserve the properties of the parent metals. Ideal where joints has a close fit up and will produce neat joints with dptimum ductility and strength. These are normally considered to be general purpose alloys. They exhibit good all round characteristics of short melting range, good flow, joint penetration and fillet forming capability. Due to their good flow characteristics they are suitable for majority of application A free flowing general purpose brazing alloy. Its brooder melting range is helpful where clearances are wide or are not uniform. Unless heating is rapid, care must be taken that the lower melting constituents do not separate our by liquation. Similar to RAJAT 1203140 but more economical. RAJAT 1200125, 21, 20 Cd have good fillet forming properties with an ability to bridge wide gaps. Their wide melting range limit their applications. Due to their wide melting range they are somewhat more subject to liquation and may require more care during brazing. Therefore, They are not normally recommended for applications with slow heating rates. Economical alloy with wide melting range. Like above, preferred for application having short heating short heating cycles to avoid liquation. Ideal for bridging wider gaps where work pieces are insensitive to heat.

• Type: Mechanical
• Material:: Metal

We are the leading manufacturers, exporters and supplier of this products.

Brazing is a metal-joining process whereby a filler metal is heated above melting point and distributed between two or more close-fitting parts by capillary action. The filler metal is brought slightly above its melting temperature while protected by a suitable atmosphere, usually a flux. It then flows over the base metal (known as wetting) and is then cooled to join the work pieces together. It is similar to soldering, except the temperatures used to melt the filler metal are higher.

• Brand: Kranti
• Country of Origin: Made in India
• Diameter: 1.6 mm
• Features: Optimum quality, Highly durable, Fine finish
• Packaging Type: Box

General-purpose, free flowing, low temperature Silver brazing alloys without any cadmium. For joining similar and dissimilar metals that are easy to use and give strong and neat joints. MWPL offers these alloys in a wide range of compositions to suit specific applications. Available in Wires and Rods, Strips, Wire Flattening, Wire Preforms, Strip Preforms, Granules and Spheres. With the help of the chart below, identify and compare alloys of our MWPL Based Cadmium Free Alloys suited to your needs

We are the manufacturing below products for industrial purpose. silver brazing alloys -cadmium free ncd & sn series silver brazing alloys -cadmium bearing - regular general purpose special silver brazing alloys for tools, vaccum brazing for ms sections silver copper phosphorus copper phosphorus alloys base metal copper based beazing alloys soft solder alloys.

We are a leading manufacturer of high quality silver brazing alloys that are easy to use, possess high strength impact with short melting ranges, free flowing and versatile. Our sillver brazing alloys have outstanding flow characteristics and mechanical properties. These are available in forms of wire, foils or shims, preformed wires or strips, granules, rings and paste or powder. Besides these can be customised as per customers specifications and applications. Our Silver Brazing Alloys range includes: Cadmium Bearing Alloys, Cadmium Free Alloys and for Tungsten Carbide Tipped Tools having Nickel content.

silver brazing alloys, nickel bronze alloy, silicon bronze alloy

silver brazing alloys, soldering fluxes

silver brazing alloys, aluminium filler wires, Silver Brazing Foils

Medium Silver Phos Copper Brazing Alloy, Graphics Card

silver brazing alloys, Alloy Fittings, Manganese Metal Lump

silver brazing alloys, gas welding wires, soldering powders