Venus Engineering Works Bara Bazar, Kolkata, West Bengal

  • Synchronizing Panel

    Synchronizing Panel

    Request for Price

    The synchronizing panel (DG angles) , we offer to clients are mainly used to meet power system requirements in various areas and are widely used in synchronizing generators and offer multiplexing solutions. We provide the device with control switched on the front panel and the volt meter and digital meters in the device offer generator and bus measurement service to the user. Our products are highly used in areas such as : • Engineering systems • Data synchronization • Electronic equipments • Semiconductors • Telecommunication • Multimedia communication

    ...more
    Get Best Price
  • Solar Water Heater

    Solar Water Heater

    Request for Price

    Solar water heating (SWH) is the conversion of sunlight into renewable energy for water heating using a solar thermal collector. Solar water heating systems comprise various technologies that are used worldwide increasingly. In a "close-coupled" SWH system the storage tank is horizontally mounted immediately above the solar collectors on the roof. No pumping is required as the hot water naturally rises into the tank through thermosiphon flow. In a "pump-circulated" system the storage tank is ground- or floor-mounted and is below the level of the collectors; a circulating pump moves water or heat transfer fluid between the tank and the collectors. SWH systems are designed to deliver hot water for most of the year. However, in winter there sometimes may not be sufficient solar heat gain to deliver sufficient hot water. In this case a gas or electric booster is used to heat the water.

    ...more
    Get Best Price
  • Soft Starter Panel

    Soft Starter Panel

    Request for Price

    These Panels are manufactured using soft starters for various ratings of Motors to achieve optimal level of power consumption and linear acceleration and deacceleration for pumps/motors.

    ...more
    Get Best Price
  • Retrofitted Control Panel

    Retrofitted Control Panel

    Request for Price

    we offer retrofitting control panel for all type of injection moulding machine like arburg, batenfield, windsor, negribosi etc. Our engineers are skilled in both electrical and hydraulic side.

    ...more
    Get Best Price
  • Relay Control Panel and RTCC Panel

    Relay Control Panel and RTCC Panel

    Request for Price

    We offer technologically advanced Relay Control Panel & Rtcc Panel, which finds wide application in the industries such as Sugar Industry, Paper Industry, Cement Industry, Food Industry, Chemical Industry and Pumping applications. Some of the salient features of our products are: Compartmentalized design eliminates risk to maintenance personal. Separate Busbar and Cable chambers. Sufficient space for incoming and outgoing cables. Illumination in vertical cable chamber. Shrouds on live incoming terminals.

    ...more
    Get Best Price
  • purged panel

    purged panel

    Request for Price

    We manufacture purged panels for MPL & TPL that are supplied in the category of 2A, 2B classification for petrochemical industries where fire hazards are likely to occur due to presence of flammable gases or dusts in the plant. The system pressure level shall be maintained higher than the atmospheric pressure level. This system also has facilities to communicate with DCS and operated from the same. Our main customers in this product category are Manali petrochemicals and Tamil Nadu petrochemicals.

    ...more
    Get Best Price
  • Preventive Maintenance H.T. Panel

    Preventive Maintenance H.T. Panel

    Request for Price

    It better to take the preventive measures instead of curing the defects after they have occur. Keeping this in mind, we provide the preventive maintenence services to our customers at effective prices. Therefore, the cost occur in the curing of the H.T Panel is more than that can occur in prevention. These kind of services are highly famous among our customers.

    ...more
    Get Best Price
  • Power Control Center

    Power Control Center

    Request for Price

    we offer power control centre (pcc) to clients, which are an innovative method for packing electrical equipments for installation. The control centres are modular, climatized and are designed, wired, tested and factory assembled with all the electrical equipments installed inside it. We can design these power control centres as per the requirement of the client at most competitive prices.

    ...more
    Get Best Price
  • Fence Pole

    Fence Pole

    Request for Price

    PIPE POLE GI / NON GI OCTOGANOL POLE GI HI-MAST - 12 / 16 / 20 / 25 / 30 MTR

    ...more
    Get Best Price
  • Plc Panel

    Plc Panel

    Request for Price

    We manufacture PLC panels for Siemens PLC (S7-300 ), MMI with ALTIWAR drive for filter press applications. This press can be operated from local / remote and auto / manual modes. Our PLC system communicates with various instruments like temperature indicating controllers, pressure indicating controllers, sensors, etc. Our main customer in this product category is Andritz Separation Ltd.

    ...more
    Get Best Price
  • PCC Panel

    PCC Panel

    Request for Price

    We manufacture MCC panes with motors controlled by individual feeder with necessary interlock for the required system. MCC is also possible to operate from PLC / local mode. We have supplied MCC panel to Bokaro Steel Plant, Vizag Steel Plant, SRF, etc.

    ...more
    Get Best Price
  • Motor Control Center

    Motor Control Center

    Request for Price

    we offer mcc panels, which finds wide application in different industries such as sugar industry, paper industry, cement industry, food industry, chemical industry, etc. Some of the salient features of our product are- separate busbar and cable chambers. sufficient space for incoming and outgoing cables. door interlock (with defeat feature)to prevent accidental contact with lie terminals. illumination in vertical cable chamber. compartmentalized design eliminates risk to maintenance personal. shrouds on live incoming terminals.

    ...more
    Get Best Price
  • Metering Cum Sys Panel

    Metering Cum Sys Panel

    Request for Price

    We offer the latest range of metering cum syn panels, which are treated for various procedures by using modern chemical treatment technology. Our products are made from fine quality raw materials which are further scrutinized on standard specifications.

    ...more
    Get Best Price
  • Meter Panel

    Meter Panel

    Request for Price

    11 dding variety to our stock of control panels are the range of well-constructed Meter Panels that are commonly used for monitoring variations in current-voltage signals. These meter Panels are designed as per State electricity Board norms and are installed by the electricity board for individual customers.

    ...more
    Get Best Price
  • Main Distribution Panel

    Main Distribution Panel

    Request for Price

    We also manufacture distribution panels which are used in various industrial purposes. The main use of these distribution panels are in commercial complexes and industries for power supply.

    ...more
    Get Best Price
  • L T Bus Duct

    L T Bus Duct

    Request for Price

    These are used to sense numerous conditions and accordingly to operate corresponding devices. These include sensing of over current, earth fault, low transfer oil, winding temperature, status of trip circuit.

    ...more
    Get Best Price
  • Instrument and Mimic Panel

    Instrument and Mimic Panel

    Request for Price

    We offer instrumental and Mimic Control Panel for varied industrial use. It provides the exact or approximate representation of any process plant for which the control panel or the desk is being used. With the help of this the representations can be controlled and the whole view of the plant from any place. It helps minimize defects by indicating the exact location of faults when the machine is working, and on the moment that it occurs. The mimic is easy for maintenance. It has different types of instruments to control the temperature flow and pressure of process. Mimic Panels find their application in various process plants like: Ash Handling, Cement plants, Railways, Petro-chemicals, Utilities, Iron and Steel, Distribution SCADA, Power Generation. It consists of the following instruments of measurements. Temperature control indicators It controls the process temperature. When the temperature is set, it controls the temperature of the tank below the set temperature. It use RTD sensors and thermocouple to detect and control the temperature. Level controllers and Indicators It is applicable in controlling the level of the tank. It controls the high level or low level of the tanks by means of level sensors which gives signals in the form of 4-20 v or 0-5 v. Mimic mimic is used to display the actual status and process by means of mimic lamps. The indicators, starters, and controllers are used for different parameters of control.      

    ...more
    Get Best Price
  • Instrumentation Panel

    Instrumentation Panel

    Request for Price

    we manufacture instrumentation panels for eid parry and l&t bangaladesh (lafarge). Our instrumentation panels are used in process instruments like indicators, indicting controllers, recorder, temperature scanners, annunciators mounted on the panel front side, transducer mounted inside the panels. these panels are used in various industries like chemical industries, water treatment plants, sewage treatment plants, boiler control systems, etc. we supplied wtp, stp panels with siemens plc redundant system. The entire process automated and local / remote, auto / manual operated from the win cc, mmi.

    ...more
    Get Best Price
  • Infinite Solar Pumping

    Infinite Solar Pumping

    Request for Price

    Having a swimming pool outside in your back yard is a luxury many of us enjoy, but it can come at a high cost even during winter months. Once you have the solar pump installed, there will be no electricity costs to run the pool, so you will not only save money you can spend elsewhere but also around 6 tons of emissions each year.

    ...more
    Get Best Price
  • HT RELAY PANEL

    HT RELAY PANEL

    Request for Price

    HT VCB & RELAY PANEL 11 KV INDOOR TYE VCB WITH RELAY PANEL 33 KV INDOOR TYE VCB WITH RELAY PANEL 33 KV OUTDOOR TYPE VCB PANEL

    ...more
    Get Best Price
  • High Mast Pole

    High Mast Pole

    Request for Price

    High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 metres (98 ft) tall (under this height it is referred to as conventional lighting system), while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it. Some units have the lighting surrounded by a circular shield to prevent or reduce light pollution or light trespass from affecting neighbourhoods adjacent to the highway. Maintenance of these systems are done by lowering the luminaire ring from the mast head to the base using a winch and motor to the ground or at a height accessible by a cherry picker and located in areas to allow for easier access without distrupting traffic.

    ...more
    Get Best Price
  • Growbag Machine Control Panel

    Growbag Machine Control Panel

    Request for Price

    It is coir pith block making machine and its capacity is high. The control panel is designed as per the customer’s requirement. This circuit can be design either in PLC based control panel or fully electrical panel. Using the PLC the main advantages are easy interfacing with computer hence sequence of function can be modified easily and easy troubleshooting.

    ...more
    Get Best Price
  • Electrical Feeder Pillar

    Electrical Feeder Pillar

    Request for Price

    We are a leading manufacturer of feeder pillar which are used in electrical industry. These are manufactured using the latest technology in the industry and are meeting the various needs of the industry.

    ...more
    Get Best Price
  • Earthing System

    Earthing System

    Request for Price

    CHEMICAL EARTHING NORMAL EARTHING LT EARTHING

    Get Best Price

Services

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Service Providers / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
The Organisation was established in 1975, and has strengthened at a phenomenal pace with a firm commitment to quality, timely delivery, competitive pricing, and meeting customised design requirements. Supplying to 7 countries across the globe, Venus today has a turnover of over 100 million INR and it is expected to grow up to 300 million INR within the next few years.
Venus Engineering is a niche company revolutionising the electrical utility community with its complete range of custom built electrical control panels (LT, MV and HT, fully type tested by CPRI, Bhopal for short circuit, temperature rise & IP protection) and sheet steel fabricated components.
It is one of the largest manufacturers in the industry, leading in the manufacture and export of tailor made electric and electronic switchgear assemblies up to a rating of 6000 A. The product portfolio also consist of allied items i.e, bus ducts, controls, controls panels drive & PLC panels,MV/HT circuit breakers panels;relay controls panels are also consists of its manufacturing activities.
The company is an OEM for well establishes manufacturer, including , ABB, Siemens, L&T, GEC, Alstom and Utilises type tested components at venus, the philodophy in terms of customer experiance has always been.
No compromise on quality.
Affordable and Competitive pricing structure
Meeting delivery schedule against all odds
Flexible approach to diverse customer requirements.
Added to this, Venus Engineering consist of high caliber and experianced engineers, highly competent university graduates, designers and draft-persons who work closely with the customer to discuss specific requirements, and then design and produce, drawings for your approval. Our engineering staffs work very closely with the customers os that the design and the final products meets your requirements. We make extensive use of CAD software to prepare all approval and manufacturing drawings, utilising our following key strengths developed over 30 years:
quality
Reliability
experiance
Flexibility
Competitive price
Services
Association with prestigious companies
our Clientele lists includes prestigious companies such as Bhushan Steel etc who, along with others in both the public and private sectors, have banefited from our supply of steel, coal, cements, paper, hospitility, chemical, textile, nuclear power, oil, engineering and allied industries for over 2 decades.
Human Resourses
The Organisation has a strong, committed and highly motivated work force consisting of highly qualified and experienced;
Managers
Engineers
Supervisors
Workmen
Our HR policies aid in aligning our workforce with company strategy, providing customers with teams and individuals committed to meeting their requirements, whilst driving forward the organisation’s vision of complete leadership in panel industry. Our engineering team offers strong technical ingenuity in research, development, design and production. At Venus people have been the key to the success of the company and today around 100 dedicated personnel in various capacities are looking after all the affairs of the company.
Our future plans
The organization would continuously endeavor to remain in step with the times, positively responding to changes in the business environment for a leadership position in the panel industry, a vision crucial to the growth in terms of market niche.
The organization would continue to look for greener pastures to progressively capture wider markets both in India and abroad.
Our next plant is at Barasat where we are going to have our 2nd Manufacturing unit.
Read More »

Contact Information

Venus Engineering Works

  • P.L. Patodia
  • 3A, Pollock Street, 2nd Floor, Unit-II, Kolkata - 700 001, Bara Bazar, West Bengal
top