Petron Thermoplast Kamla Nagar, Agra, Uttar Pradesh

Main Features: Handle with union nut tightening control which can be used to adjust ball seat carriers. Handle use is especially indicated for maintenance work where space is limited and hard to access Settings for the customisable Labelling System using the LCE module (available as an accessory). The grey protection plug housed on the handle can be replaced with the transparent plug and customisable tag holder with the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs The PE ball seat system with locked carrier adjustable via Easyfit multifunctional handle or Easytorque adjustment kit (available as an accessory).   Type: ball Operation: manual Body: with trunnions,UPVC Other characteristics: 2-way Temperature: Min - 0oC (32oF) Max - 60oC (140oF) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: Min - 10 mm Max - 50 mm

UPVC equal tee SCH80 is 90 degree branch tee, socket connection by ASTM D2467 standards with size from 1/2″ to 8″. produced by material of unplasticized polyvinyl chlorde, UPVC Pipe Fitting SCH80 has good property of corrossion resist, light weight, easy installation and maintaince, cost low, etc, it is suitable for water supply, water treatment, and chemical industrial.     PETRON THERMOPLAST UPVC pipe fitting SCH 80 of equal TEE with following specifications: Size: 1/2″ to 8″ Standard: ASTM D2467Class: SCH80Working temperature: 0ºC to 65ºC Product   Benifits Of UPVC TEE   • Cold water plumbing application in buildings• Industrial process lines• Swimming pools• Salt water lines• Water distribution mains• Aggressive / corrosive fluid transportation• Dye plants, chrome, zinc plating and tanning plants• Sugar, paper and distillery industries.• Coal washing and ash handling• Pipes for hand pumps• Ring lines / Down take lines

The an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only. Connection system for solvent weld, threaded and flanged joints No metal parts in contact with the fluid Piston with counterweight able to work with high intensity fluid Limited pressure drop. Only minimum back pressure is required for the hermetic seal Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations Can be maintained with the valve body installed.   Body: UPVC threaded, weld, Y, flange Material: UPVC Temperature: Min - 0oC (32oF) Max - 40oC (212oF) Operating pressure: Min - 4 bar (58.02 psi) Max - 16 bar (232.06 psi) DN: Min - 15 mm Max - 80 mm

Pipes under pressure with cold chemical weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE weldon) and primercleaner.PVC-U Pipe Technical Specifications: Size range d 16 ÷ d 225 (mm) Nominal pressure: SDR 13.6 (PN16) with water at 20oC SDR 21 (PN10) with water at 20oC Temperature range 0oC ÷ 60oC   Use: for water Material: UPVC Other characteristics: Welded Outer diameter: Min - 16 mm Max - 225 mm Pressure: Min - 13.6 bar (197.25 psi) Max - 21 bar (304.58 psi) Temperature: Min = 0oC (32oF) Max = 60oC (212oF)

Foot valve allows the passage of fluid in one direction only. Connection system for solvent weld and threaded joints No metal parts in contact with the fluid Piston with incorporated counterweight able to work with high intensity fluid Limited pressure loss. Only minimum back pressure is required for the hermetic seal Valve material compatibility (PVC-U) with water, drinking water and other food substance conveyance according to current regulations Can be maintained with the valve body installed   Material: UPVC Other characteristics: Foot Temperature: Min - 0oC (32oF) Max - 60oC (140oF) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: Min - 10 mm Max - 50 mm

Diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light.The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.Main Features: High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring Customisation plate - the customisation lets you identify the valve on the system according to specific needs Innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime New design of valve body interior - substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced Adjustment linearity - the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter.   Type: Diaphragm Function: Shut-off, regulating Body: PVC U Other characteristics: 2-way, compact Temperature: Min = -20oC (-4oF) Max = 60oC (248oF) Operating pressure: Min - 0 bar (0 psi) Max - 10 bar (145.04 psi) DN: Min - 15 mm Max - 65 mm

Customisable Labelling System - built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs. Optimised dynamic fluid design - energy savings thanks to the improved valve Kv value with consequent pressure drop reduction High surface finish ball shutter - wear reduction, increase in working life and reduced valve maintenance. Ideal for conveying dirty fluids, even with suspended solids and filaments thanks to the special design that permits internal valve selfcleaning Locked ball seat carrier - safe dismounting for maintenance with the Easyfit multifunctional handle or Easytorque kit Ideal for horizontal installations - perfect seal even with low back pressure. Silent and durable even with strong vibrations and pulsating fluid PVCU shutter and springs available made of STAINLESS steel 316, Hastelloy C276, A316 PTFE encapsulated - maximum reliability in a wide field of applications from salt water to aggressive acids.   Type: Spring, ball Material: UPVC Temperature: Min - 0oC (32oF) Max - 60oC (212oF) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: Min - 10 mm Max - 50 mm

Butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.Main Features: Ergonomic multifunctional handle in HIPVC with the option for quick operation, graduated adjustment in 12 positions (every 7.5°). 180° reversible mounting Customisable Labelling System: integrated module, made of a transparent protection plug customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to the specific needs Drilling pattern with oval slots that allow coupling to flanges according to numerous international standards Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid. Onepiece top flange with PVCU rack. Drilling according to standard ISO 5211 for direct drive: DN 40 ÷ 65: F05 DN 80 ÷ 150: F07 DN 200: F10   Type: butterfly Operation: lever Function: shut-off, regulating Media: for water Body: PVC Temperature: Min - 0oC (32oF) Max - 60oC (140oF) Operating pressure: Min - 4 bar (58.02 psi) Max - 16 bar (232.06 psi) DN: 11 mm, 14 mm, 17 mm, 22 mm

The butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.In addition to manually operated version, also available in configuration with electrical actuator FE/CE or pneumatical actuator.Produced using actuators complying with current regulations and selected by according to its requirements of quality and reliability. Disk in PVC-U with through shaft Zinc plated square section steel stem completely isolated from the fluid complying with standard ISO 5211: DN 40 ÷ 65: 11 mm DN 80 ÷ 100: 14 mm DN 125 ÷ 150: 17 mm DN 200: 22 mm Can also be installed as an end line valve, bottom discharge valve or tank dump valve The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc plated steel inserts available as an optional extra Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations. Possibility of directly installing a gearbox or pneumatic and/or electric actuators with a standard drilling pattern according to standard ISO 5211 F05, F07, F10.   Type: UPVC butterfly Operation: Electrically-actuated Function: Shut-off, regulating Media: for water Temperature: Min = -10 °C (14 °F) Max = 55 °C (131 °F) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: 11 mm, 14 mm, 17 mm, 22 mm

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.In addition to manually operated version, the VKD is also available in configuration with electrical actuator VKD/CE or pneumatical actuator VKD/CP.The actuators are firmly connected to the valve with a special module Power Quick made by FIP entirely produced in technopolymer PP-GR.The VKD/CE and VKD/CP are produced using actuators complying with current regulations and selected by FIP according to its requirements of quality and reliability.The efficiency of these valves, tested according to the company quality standards, is guaranteed by the expertise and know-how that FIP dedicates to the manufacture of its products.   Type: Ball Operation: electrically-actuated Other characteristics: waterproof, ATEX Temperature: Min - 0oC (32oF) Max - 90oC (194oF) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: Min - 65 mm Max - 100 mm

Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechanical strength and toughness at lower temperature and it’s self-extin-guishing. The operating temperature ranges from-30 °C to +150 °C. PVDF shows a high resistance to chlorine, bromine and high-energy radiation. PVDF RODS PROPERTIES High tensile strength High mechanical strength  High rigidity (also at low temperature)  High chemical resistance  Very low water absorption  Good friction and wear andtear values  Self-extinguishing  High UV-resistance  Toxic fumes when burned  Relatively high coefficient of thermal expansion

Pressure pipes for connection system by butt or socket welding.PP-H Pipe Technical Specifications: Size range d 20 ÷ d 400 (mm) Nominal pressure: SDR 17, 6 (PN6) with water at 20oC SDR 11 (PN10) with water at 20oC Temperature range 0oC ÷ 100oC PVDF Pipe Technical Specifications: Size range d 16 ÷ d 110 (mm) Nominal pressure: SDR 21 (PN16) with water at 20° C SDR 33 (PN10) with water at 20° C Temperature range -40 °C ÷ 140 °C   Use: For Water Material: Polypropylene, PVDF Outer diameter: Min - 16 mm Max - 400 mm Pressure: Min - 6 bar (87.02 psi) Max - 16 bar (232.06 psi) Temperature: Min = -40oC (-40oF) Max = 140oC (284oF)

The innovative True Union ball valve with union nut tightening control, that permits simple and safe installation for reliable service in time.Main Features: Settings for the customisable Labelling System using the LCE module (available as an accessory). The grey protection plug housed on the handle can be replaced with the transparent plug and customisable tag holder with the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs The PE ball seat system with locked carrier adjustable via Easyfit multifunctional handle or Easytorque adjustment kit (available as an accessory.   Type: PVDF ball Operation: manual Body: with trunnions, PVDF Other characteristics: 2-way Temperature: Min = -400C (320F) Max = 1400C (1400F) Operating pressure: Min - 0 bar (0 psi) Max - 16 bar (232.06 psi) DN: Min - 10 mm Max - 50 mm

PVC-UPolyvinyl chloride is a flame retardant material with an exceptional chemical resistance and also with lower stress cracking. PVC-U possesses high me-chanical strength, tensile strength and a continuous operating temperature from -15 °C to +60 °C. lt can also be easily glued and welded.PVC-TRPVC-TR is a transparent PVC-U which possesses a slightly diminished strength but simultaneously an increased toughness. The upper continuous servicetemperature is +60 °C. PVC-TR can be glued and welded like PVC-U. PVC-CHigh rigidity, strength and hardness at increased temperatures (+85 °C).   Application » High mechanical strength, tensile strength and hardness» Good insulation properties for electronics» High chemical resistance» Self-extinguishing» Low water absorption» Good adhesiveness and paint ability» Low impact strength» In white colour weatherproof Properties    » High mechanical strength, tensile strength and hardness» Good insulation properties for electronics» High chemical resistance» Self-extinguishing» Low water absorption» Good adhesiveness and paintability» Low impact strength» In white colour weatherproof

The linear PPS (Polyphenylensulfide) belongs to the semi-crystalline materials and offers a very high mechanical performance in conjunction with an excellent efficiency at the same time (usual operating temperature up to approx. +230 °C), high dimensional stability and creep strength. The LOI belongs to the highest of the Polymers. By the reinforcement with glass fibres strength is achieved, which is comparable with light metal. PPS closes the gap between the technical synthetics and PEEK with its strength and economy. Applications  1.Pump parts 2.Fan parts 3.Impellers 4.Wheels 5.Valve balls 6.Parts in the fuel and automotive sector  Properties Very high strength and rigidity High hardness High thermostability High dimensional stability  Very high chemical resistance  Very good insulating properties  High weather resistance  High resistance to hydrolysis

it is designed and produced as per standard DIN 8077 by DIN 8077 SDR 11 , PP-H DIN 8077 SDR 11  pipe fitting is suitable for water supply, water treatment, fishing farm, irrigation, chemical industrials, ect. it is easy to installation and maintenance, cost low and durable.   Application of PP-H Reducer Coupler : Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components   We offer PP-H 90 degree elbow DIN 8077 SDR 11  with following specifications: Size: 1/2″ to 6″ Standard: DIN 8077 Working pressure: DIN 8077 SDR 11 Working temperature: 0ºC to 65ºCProduct

PVDF Pipe ISO 10931 SDR 11  is produced as per standard DIN 10931, size from 1/2″ to 8″, 4 meters length, in generally by dark grey color, PVDF pipe ISO 10931 SDR 11  has good property of corrosion resist, light weight, easy installation and maintenance, cost low, etc. ISO 10931 SDR 11  PVDF pipe and fitting is it suitable for water supply, water treatment, chemical industrial, etc. Polyvinlidene Fluoride PVDF is a unique thermoplastic with properties which allow it to be used for very aggressive or highly specialized applications. Although expensive compared to other thermoplastics, PVDF offers an economically attractive alternative to many “exotic” materials and/or in process lines where limited working life of other materials necessitates frequent replacement.   Advantages Outstanding mechanical properties, even at high temperatures Long service life, even under intensely corrosive conditions Very pure material by implementing without additives Secure jointing by high-quality welding technology Smooth inner surface Characteristics Size: 1/2″ to 8″ • Working pressure:- up to NP 25 bar (d 16 – 32 mm) at 20° C. – up to NP 20 bar (d 40 – 50 mm) at 20° C. – up to NP 16 bar (d 63 – 110 mm) at 20° C. • Maximum working temperature: from -40° C to +140° C. • Material: Polyvinylidene fluoride  PVDF. • Jointing technique: socket fusion or butt welding. Durability of PVDF. Curves in accordance to ISO 10931 with MRS (minimum) = 25 N/mm2 (MPa)

PP-H U Flanged end Ball  Valve BSPT is thread connection Ball Valve by true union type, BS standard, size from 1/2″ to 4″, operated by hand lever. PP-H true flanged end Ball Valve is completely made by PP-H body with EPDM seal and PTFE seat, it is good corrosive resistance, working pressure PN10. UPP-H Flanged End Valve screw end is easy to installation and replace.     We offer high quality PP-H Ball Valve Screw Port NSPT with specifications as follows: Basic specificationSize: 1/2 inch ~ 4 inchBody Material:PP-H Seal material:EPDMSeat Material:PTFESocket connection:BSPTDesign pressure:1.0Mpa(PN10 bar)Feature of valve All the parts that will touch medium is made from plastic and rubber.  Self sealing ball design make valve sealing better  Flange end is optional.  Actuator mounting plate available   Appliction for PP-H valve Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components

PP-H Diaphragm Valve is a kind of Diaphragm Valve made by PP-H materials, diaphragm valve is one of the most important valves in industrial for shut off and control of pipe system, PP-H diaphragm valve with flange connection for ANSI CL150, JIS 10K and DIN PN10. pressure rate PN1.0 Mpa.U PP-H Diaphragm Valveis widely used in mining plant, water treatment, acid pickling, etc. Application of PP-H Diaphragm Valve: Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components   We offer PP-H diaphragm valve with the specifications as follows: Basic specificationSize range: DN15~DN100 (1/2 inch ~ 4 inch)Body materials: PP-H -UDiaphragm material: PTFE with EPDM cushionFlange connection: DIN PN10; ANSI CL150; JIS 10KDesign pressure: 1.0Mpa (PN10 bar) Feature of valvesBody and diaphragm that touch medium are made from plastic and rubber.Stop device protect the diaphragm from over tighten, extend the diaphragm working life.EPDM cushion protect the PTFE diaphragm from over tighten, make sealing better.Strengthen design of bonnet and body make the valve stronger and sealing better.PTFE diaphragm is designed hiding inside the bonnet, extend the diaphragm working life.Molded bottom stand for simple mounting to the supportor.Pneumatic actuator mounting is available.    

PP-H equal tee DIN 8077 SDR 11  is 90 degree branch tee, socket connection by DIN 8077 standards with size from 1/2″ to 8″. produced by material of unplasticized polyvinyl chlorde, PP-H Pipe Fitting DIN 8077 SDR 11  has good property of corrossion resist, light weight, easy installation and maintaince, cost low, etc, it is suitable for water supply, water treatment, and chemical industrial Application of PP-H Cross Tee : Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components   PETRON TTHERMOPLAST PP-H pipe fitting DIN 8077 SDR 11  of equal tee with following specifications: Size: 1/2″ to 8″ Standard: DIN 8077 Class: DIN 8077 SDR 11  Working temperature: 0ºC to 65ºCProduct

        PP-H Coupler  DIN 8077 SDR 11  is a short radius type elbow, it is designed and produced as per standard DIN 8077 by DIN 8077 SDR 11 , PP-H DIN 8077 SDR 11  pipe fitting is suitable for water supply, water treatment, fishing farm, irrigation, chemical industrials, ect. it is easy to installation and maintenance, cost low and durable.   Application of PP-H Coupler : Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Component   We offer PP-H 90 degree elbow DIN 8077 SDR 11  with following specifications: Size: 1/2″ to 6″ Standard: DIN 8077Working pressure: DIN 8077 SDR 11 Working temperature: 0ºC to 65ºCProduct

PP-H  Check Valve : True Union PP-H Ball Check Valve PP-H model is a ball type Check Valve with true union end, socket connection as per standard DIN, ANSI, JIS, CNS, BS. seat and sealed by EPDM o ring, ball with solid type make the valve sealing better. PP-H true Union Ball Valve is easy to install and replace, it is suitable for vertical installation, used for water supply, water treatment, agriculture irrigation, finishing farm, etc. Application of PP-H Check Valve : Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components Basic specificationSize: DN15~DN50 (1/2 inch ~ 2 inch)Body Material: PP-H -U;PP-H -C;PP-HSeal material: EPDMSocket connection: DIN,ANSI,JIS,CNSDesign pressure: 1.0Mpa(PN10 bar) Feature of valveBall orbital design lower the valve leaking risk. Double union design easy to replace and install of valves  Hollow ball design make the valve seal better Simple structure make it easy to diagnose problem and repair valve Flange end is optional.

PP-H Butterfly Valve Gear Operate ANSI size from 2″ to 24″, lug type and wafer type fit standard ANSI B16.5 CL150. body made by material PP-H and seals by EPDM. PP-H Butterfly Valve suitable for industrial application and water supply, it has good property of corrosion resistance for chemicals, PP-H butterfly valve works temperature from 0 to 70 degree in generally, and pressure rate from 0.2Mpa to 1.0Mpa.    Application of PP-H Butterfly valve :   Acid Fillings Stations Effluent Treatrnent/Disposal Plants Laboratories Refineries Automotive Industry Electroplating Plants Nuclear Research Centres Textile Mills Chemical Industry Food and Beverage Paper & pulp mills Thermal Baths Construction (Plumbing) Galvanizing Plants Pharmaceutical Industry Water Purification Pants Desalination Plants Industrial washing/bleaching lines Pickling Lines Packaging of Electrical Components PP-H gear drive butterfly valve with following specifications:   Basic specification Size: DN50~DN400 (2 inch ~ 16 inch)Wafer connection: DIN PN10; ANSI CL150; JIS 10KBody Material: PP-H Disc Material: PP-H Seal material: EPDM; NBR, NRDesign pressure: 0.2~1.0Mpa (PN2~10 bar)  Feature of valve Steel frame inside of body and disc make strengthen the valve    Electric and pneumatic actuator mounting are availableGear box has aluminium alloy and plastic shell for optional

PP-H Ball Valve : PP-H Ball Valve BSPT is thread connection Ball Valve by true union type, BS standard, size from 1/2″ to 4″, operated by hand lever. PP-H true Union Ball Valve is completely made by PP-H body with EPDM seal and PTFE seat, it is good corrosive resistance, working pressure PN10. PP-H Ball Valve screw end is easy to installation and replace.  Application of Ball Valve : Plant chemical distribution lines Water and wastewater Acid systems for refineries, pickling lines and plating shops Chlorine injection, chlorine dioxide and chloralkali plant piping Steel wire plants Battery manufacturing Bleach lines in textile and paper mills Alum and caustic handling systems Circuit board manufacturing Semiconductor Pharmaceutical Cooling water and cooling tower systems Tailing and slurry lines Wash water recovery systems Plant water supply Brine and seawater systems Fish farming Waterworks Aquariums and swimming pools Irrigation systems in golf courses,   We offer high quality PP-H Ball Valve Screw Port NSPT with specifications as follows:  Basic specificationSize: 1/2 inch ~ 4 inchBody Material:PP-H -USeal material:EPDMSeat Material:PTFESocket connection:BSPTDesign pressure:1.0Mpa(PN10 bar) Feature of valve All the parts that will touch medium is made from plastic and rubber.  Self sealing ball design make valve sealing better  Flange end is optional.  Actuator mounting plate available