DG (Diesel Generator) Sets Dealers in Cg Road, Ahmedabad (20 products available)

• Power: 600 kVA
• Genset Brand: Kohler
• Phase: 3 Phase
• Fuel Consumption (at 100% Load): 119.1 ltr/hr
• Fuel Tank Capacity: 900 litres
• Frequency: 50 Hz
• Features: Dry type air filter with restriction indicator, DG circuit breaker, Electric start with battery, Fuel water separator, Conveniently located fuel level indicator, Weather prof enclosure to withstand harsh climate.

• Speed: 50 Hz
• Country of Origin: Made in India
• Power Factor: 0.8 PF
• Voltage: 240-415V
• Fuel Tank Capacity: 300 Litre
• Phase: 3-Phase
• Genset Brand: Crompton

Diesel generating sets mainly supplied to GWS & SB, GIDC, BSNL, ac BSF for providing power to various water supply projects, Industrial Estates, telephone exchange Buildings and to the flood lighting at India-Pakistan Border for Border security Force. We supplied LT D.G. Sets starting from 30.0 KVA and HT D. G. Sets up to 1250 KVA rating. D.G. Sets Supplied and installed with all latest technology, and electrical equipments up to the satisfaction of the end Customer. Major works

  a diesel generator is the combination of a diesel engine with an electrical generator (often called an alternator) to generate electric energy. Diesel generating sets are used in places without connection to the power grid or as emergency power-supply if the grid fails. Small portable diesel generators range from about 1 kva to 10 kva may be used as power supplies on construction sites, or as auxiliary power for vehicles. as power generation is big industry all over world and shortage of power is highly demanding into markets. Green & clean environment [eco friendly] is demanded with products including power systems and related accessories, components and services including the pre-integrated power command system, plus diesel and natural gas generator sets, transfer switches, and switchgear used in commercial facilities for emergency backup and prime power. Cummins power generation is also a worldwide supplier of rental generator sets and related services.diesel powered generator sets remain the number–one choice for standby and emergency power systems, worldwide. Able to start and assume load in less than 10 seconds, and rated load in a single step, diesel generator sets are the epitome of rugged dependability and reliable mechanical and electrical performance. Diesel generators are also well suited to utility peaking plants, distributed generation (dg) facilities, peak shaving (or peak lopping), and power management at large commercial or industrial sites.correct genrator installation to ensure correct functioning, reliability and low maintenance costs generators must be installed correctly. To this end manufacturers provide detailed installation guidelines covering such things as: • sizing and selection • electrical factors • cooling     types of cooling   1. Air cooling 2. Water cooling • ventilation • fuel storage 170• noise • exhaust • starting systems these are frequently ignored causing problems for users.  

BEARINGS      Replaceble, precision type steel backed shells with higher load bearing capacity      Superior resistance to corrosion and wear due to copper-lead formulation. Lead-tin overlay      for fast and effective break-in surface. -> CAM SHAFT      Induction hardened, alloy steel, broad lobe cam shafts precisely control valve and injector      lobes. Replaceable precision type cam bushes Hardened, roller type cam shaft followers      longer cam and follower life. -> CONNECTING RODS      I beam section, drop forged, alloy steel connecting rod with easy in-frame engine overall      capability. Rifle drilled pressure lubrication of pistion pins. -> COOLING SYSTEM      Belt driven centrifugal water pump. Large volume coolant passages provide even flow of      coolant around cylinder liners, valves and injectors . System desiged for Indian ambient      temperature. Corrosion inhibitor coolant is environment friendly, checks foaming, scaling,      rust ,corrosion . controls pH value and neutralises acids. -> COUNTER BALANCER      Crankshaft driven, Located in Oil pan. -> CRANK SHAFT      High tensile strength, vacuum degassed medium carbon alloy steel forging . Induction      hardened pins and journals for high fatigue resistance, Toughened core provides better      compressive fatigue strength.. Dynamically balance in all planes. -> CYLINDER BLOCK      Alloy cast iron with removable wet liners. Cross bolt support to main bearing cap provides      extra strength and stability. -> CYLINDER HEADS      Alloy cast iorn, stress relieved , Each head serves two cylinders.. Designed for maximum      coolant flow across the cylinder and for optimum swirl for better combustion /fuel efficiency      and emissions. Valve seat inserts are corrosion resistant. -> GEAR TRAIN      All gears are hardened helical gears driven from crank shaft and located at front the block. -> CYLINDER LINERS      Replaceable wet liners dissipate heat faster than dry liners and easily replaced without      reboring the block. -> FUEL SYSTEM      MICO / BOSH self adjusting direct injection. Mechanical governor for droop governing      characteristics. This system has high pressure in fuel lines and high injection pressure in      the cylinder for efficient fuel combustion and lesser fuel leakages. -> LUBRICATION      Efficient, forced lubricating oil system using gear pump with internally drilled passages in      cylinder block and heads to feed all bearings and other parts including piston cooling . Oil      cooler, full flow filters and by-pass filters maintain oil quality, thus maximising oil and      engine life. -> PISTONS AND PISTON PINS      Aluminium alloy with Ni-resist ring carrier piston to minimise piston ring leakages.Cam      tuned barrel shaped to compensate for thermal expansion. Piston pin ism fullfloating , solid      steel retained by snap rings. -> TURBOCHARGERS WITH AFTER COOLER      Holset turbocharger with after cooler mounted on the engine converts energy of exhaust      gases for more power , improved fuel economy, altitude compensation and lower exhaust      temperature , smoke and noise levels. -> VALVES      Chrome plated type intake and exhaust valves. Wear resistant face on exhaust valve. -> STANDARD EQUIPMENT      # Radiator with blower fan      # Coolant      # Paper element filters- Fuel Filter & Lube Oil Filter      # Flywheel housing and Flywheel      # Holset flexible coupling / Directly coupled      # Dry type air cleaners and Vaccum indicators      # Residential silencer      # Stainless steel exhaust flexible bellow      # Electric starter ( 12 V / 24 V )      # Battery charging alternator      # Local instrument panel     # Safety controls (trip) :     # High Water Temperature (HWT) Low Lube Oil Pressure (LLOP) -> OPTIONAL EQUIPMENT      # Air starter      # EFC governor      # Over speed stop      # Lube Oil and coolant heaters -> INSTRUMENT PANEL      # Lub Oil temp. gauge      # Starting switch with key      # Water Temp. gauge      # Lub oil pressure gauge      # Hour meter with RPM indicattor      # Indicating lamp, push button   2.ALTERNATOR Synchronous alternator of KIRLOSKAR / CROMPTON / STAMFORD / LEROYSOMER make rated @ 1500 RPM at 0.8 lagging PF at 415 V suitable for 50 Hz 3 phase system. The alternator shall be in SPDP enclosure, IP 23, Class H Insulation, Self excited, Self regulated, Brushless (From 75 kVA) foot mounted with single bearing design. The alternator shall confirm to IS 4722, BS 5000 and IEC 34 and shall be suitable for tropical conditions.   3.ALTERNATOR CONTROL PANEL Floor mounting type, totally enclosed, vermin proof, louvered steel fabricated SWG 14 Control panel suitable for the above Generator comprising of • Voltmeter • Ammeter • MCB / MCCB / ACB (As per the rating of DG ) • Frequency Meter • Ammeter Selector Switch • Voltmeter selector Switch • INDICATING LAMP • L1setrunning • L2 LOAD ON   4.BATTERIES & BATTERY LEADS Battery of rated A/H Capacity of STANDARD / EXIDE make to cater the electrical starting of the genset along with the battery leads.   5.FUEL TANK 8 Hours Capacity, Floor mounting type made from 14 SWG MS sheet, duly painted and fitted with inlet outlet , returns connection , air vent , drain value , Gate value , Over flow , Level guage , level indicator and Breather.   6.ARRANGEMENTS The above Engine and alternator would be Directly coupled. Both the units including the radiator / heat exchanger mounted on a rigid fabricated base frame would be of MS STEEL suitably machined to ensure perfect alignment of the engine and alternator with rigid construction to ensure minimum vibration. The base frame would be provided with lifting facilities and pre-drilled foundation holes suitable for permanent installation on pre-prepared concrete foundation.  

diesel electric generators, Diesel Generator Parts, Silent Diesel Generators

Diesel Generating Sets

Diesel Generating Sets, Auto Part, Alternator Parts, gear filter

Generator, generator diesel

Diesel Generators, street light installation services, pumping systems

Diesel Generators, Marine Chilling Compressor, Compressor Valves

Kirloskar Silent Diesel Generator Set, Small Diesel Generator Set

Diesel Generating Set, Energy Saving Products

3 Phase AC Alternator, Water Cooled Diesel Generator, Auto Transfer Switch

Diesel Generators

Diesel Generators, gas generator sets, Turbines

Power Plant, paper mill, engineering machinery, Plastic Machinery

Diesel Generating Sets

Diesel Generator Set

Diesel Generators, Solar Products