Dhaval Engineers Rakhial, Ahmedabad, Gujarat

  • V-belt Pulley

    V-belt Pulley

    Request for Price

    v-belt pulley or v-groove pulley. This pulley is also known as aara or light weight pulley. This is used to transmit power for low weight. These are normally used where rotation is less and moving part connected to output shaft is very light. Pulleys are made from normally cast iron. 

    ...more
    Get Best Price
  • Tyre Coupling

    Tyre Coupling

    Request for Price

    · inherent overload protection and high misalignment capacity.· choice of tyres - standard, neoprene or fire resistant anti-static (fras)· range of 17 sizes, with power rating from 0.22 kw to 132 kw at 100 rpm· spacer tyre couplings for dbse of 80 mm, 100 mm, 140 mm & 180 mm· available as through bore or with taper lock bushes.

    ...more
    Get Best Price
  • Taper Lock Pulley

    Taper Lock Pulley

    Request for Price

    v/wedge pulleyspoly v pulleystiming pulleys· dual duty grooves to perfectly match classical v and spacesaver wedge belts· standard range caters to drives up to 200 kw with speed ratios upto 1:7· shelf to shaft 'taper lock' bushes· over 470 standard sizes to cater to wide range of requirements.

    ...more
    Get Best Price
  • taper lock dual duty pulleys

    taper lock dual duty pulleys

    Request for Price

    Dual Duty grooves to perfectly match Classical V and Spacesaver Wedge belts. Standard range caters to drives up to 200 Kw with speed ratios upto 1:7. Shelf to shaft 'Taper Lock' bushes. Over 470 standard sizes to cater to wide range of requirements.

    ...more
    Get Best Price
  • Taper Lock Bush

    Taper Lock Bush

    Request for Price

    · Easy and quick 'Shrink fit'· Eliminates precision taper fitting keys· Interchangeable between many products· Convenience in dismantling, maintenance and component replacement

    ...more
    Get Best Price
  • Solid Pulley

    Solid Pulley

    Request for Price

    A series of pulleys of various diameters combined in a single concentric unit is knows as step pulley and used to vary the velocity ratio of shafts. Step Pulley is used where variations are required from slow rotations to high rotations with change of torque. It is also known as cone pulley.

    ...more
    Get Best Price
  • power transmission chain

    power transmission chain

    Request for Price

    Roller chains are used in basic power transmission...Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute. Roller chains runs on simplex sprocket. The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. We offer precision roller chains from 36" pitch to 4" pitch with BSAASA standard at most competitive price.

    ...more
    Get Best Price
  • pinbush coupling

    pinbush coupling

    Request for Price

    Pin Bush type Flexible Coupling is of the cushioned drive type, transmitting the torque through high tensile steel bolts to the machine input. Highly developed rubber compounds are used in bushes to absorb shock, tensional vibrations and slight misalignments. Simple and compact in construction, Pin Bush Couplings are capable of transmitting high torques at maximum speeds. This type of coupling permits drives in either direction and requires neither lubrication, nor adjustment after fitting.

    ...more
    Get Best Price
  • Pin Bush Coupling

    Pin Bush Coupling

    Request for Price

    Pin Bush type Flexible Coupling is of the cushioned drive type, transmitting the torque through high tensile steel bolts to the machine input. Highly developed rubber compounds are used in bushes to absorb shock, tensional vibrations and slight misalignments. Simple and compact in construction, Pin Bush Couplings are capable of transmitting high torques at maximum speeds. This type of coupling permits drives in either direction and requires neither lubrication, nor adjustment after fitting.

    ...more
    Get Best Price
  • Jaw Couplings

    Jaw Couplings

    Request for Price

    · Absorbs shock loads and dampens small amplitude vibration.· Quick and easy installation.· Range of Standard (8 sizes) External Spider (6 sizes) and Cushion Type (6 sizes) with power rating from 0.21 Kw at 22.40 Kw at 100 rpm.

    ...more
    Get Best Price
  • Hollow Pin Chain

    Hollow Pin Chain

    Request for Price

    Hollow bearing pin chain facilitates fixing attachments to outer links by bolting through the hollow pin and is suitable for use in all normal conditions. It is ideal for setups where spacing of crossrods or pins must be changed frequently. It also conserves weight compared to roller chain.  

    ...more
    Get Best Price
  • Gear Couplings

    Gear Couplings

    Request for Price

    · High compensation of angular, parallel and axial misalignments.· Seal carrier for easy maintenance.· Carbon steel forged / cash hubs with hardened teeth.· Range of 19 sizes with power rating from 11.5 Kw to 12700 Kw at 100 rpm.· Variants of sheer pin, spacer, torsion shaft types are also available.

    ...more
    Get Best Price
  • Chain Sprocket

    Chain Sprocket

    Request for Price

    Simplex / Single Strand Sprocket Simplex / Single Strand SprocketDouble Simplex / Two Strand Sprocket Double Simplex / Two Strand Sprocket

    ...more
    Get Best Price
  • Chain Coupling

    Chain Coupling

    Request for Price

    Chain Couplings are commonly used in slow speed, high torque applications. Roller Chain Couplings are used to connect two shafts, a reducer, or a motor directly to a machine for efficient power transmissions. Construction is simple, it consist of a combination of only three basic parts, one coupling duplex roller chain and two coupling sprockets.  

    ...more
    Get Best Price
  • pilot bore pulleys

    pilot bore pulleys

    Request for Price

    Get Best Price
  • Step Pulley

    Step Pulley

    Request for Price

    A series of pulleys of various diameters combined in a single concentric unit is knows as step pulley and used to vary the velocity ratio of shafts. Step Pulley is used where variations are required from slow rotations to high rotations with change of torque. It is also known as cone pulley. 

    ...more
    Get Best Price
  • Timing Pulley

    Timing Pulley

    Request for Price

    Timing Pulleys are widely used in various equipments where timing of both the drive are precious and the display ratio is important. Advantage of timing pulley is to eliminate slippage and to maintain Constant Angular velocity. Timing Pulleys are manufactured as per ANSI / BS standard with Carbon Steel / Alloy Steel / Aluminium with Hardened teeth to provide long life.  

    ...more
    Get Best Price
  • Flexible Couplings

    Flexible Couplings

    Request for Price

     Transmits torque through high tensile steel bolts.· Highly developed rubber compounds are used in bushes to absorb shock loads, torsional vibrations and slight misalignments.· Range of 26 sizes with power rating from 0.81 Kw to 2069 Kw at 100 rpm.

    ...more
    Get Best Price
  • Standard Roller Chain

    Standard Roller Chain

    Request for Price

    Roller chains are used in basic power transmission...Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute. Roller chains runs on simplex sprocket. The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. We offer precision roller chains from 3/6\" pitch to 4\" pitch with BSA/ASA standard at most competitive price.

    ...more
    Get Best Price
  • Honey comb chain

    Honey comb chain

    Request for Price

    The honey comb Chain/Belt are constructed from cross rods and a flat metal strip. At the sides of the belt the cross rods have a welded ring (welded edges). The honey comb Chain/Belt is positively driven by sprockets, and can be used in conveyors. It is used in Ovens, washing, cooling, drying, sorting, & bread production systems.

    ...more
    Get Best Price
  • duplex chain

    duplex chain

    Request for Price

    Duplex Chains is variant of roller chain to carry more load on transmission. The size of chain defined by pitch of chain (distance between center of consecutive rollers in chain), Diameter of Roller which is designed on basis of Diameter of Sprocket and no. of teethes on sprocket, thickness of plates calculated by load to be taken etc. Duplex Chain are used in combination with duplex sprockets.

    ...more
    Get Best Price
  • Piv Chain

    Piv Chain

    Request for Price

    P.I.V. ( Positively Infinitely Variable ) Chain links contains packs of hardened steel slats which slide freely from side to side to conform with grooves in the wheel faces. This unique self forming tooth capability results in positive no slip transmission and long chain life. PIV Chain is mostly used in PIV Gearboxes.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Dhaval engineers are pioneer in the field of manufacturing HEAVY DUTY Taper LOCK PULLEY and Pilot Bore Pulley. We are also manufacturing different types of Pulleys, Couplings, Taper Lock Bush, Gear, Gear Coupling Chain Wheel, Gear Box and Waram Wheel. We are pioneer in pulley manufacturing for wide range of products. Because of good quality and performance our customers are satisfied fully.
The quality standards are maintained by quality control testing program and continuous monitoring on activities of raw material to finished products. We are manufacturing following products.
(i) PULLEY :- Taper Lock Pulley and Pilot Bore Pulley ,
Flat Belt Pulley, Heavy Fly Wheel etc.
V-Groove Pulley in Section A, B, C, D, E, M, Z,
3V, 5V, 8V, and size up to 2000 mm PCD
Diameter and up to 20 Grooves.
(ii) BUSH :- Graded Taper Lock Bush, Graded Flanged Type Bush.
(iii) COUPLING:- Gear Coupling, Pin Bush Coupling, Muff Coupling, Tyre Coupling, Star Coupling.
(IV) GEAR:- Different types of Gear, Gear Box, Waram Wheel
All materials are inspected for mechanical and chemical properties by verifying their certificates as per established norms. Quality and Performance being at the first place for manufacturing, we have gained a strong base of customers all over the globe. Our customers provides us with a never ending source of sales as well as ideas for innovative products.
Read More »

Contact Information

Dhaval Engineers

  • Mr. Dhaval N. Shah
  • 43 & 39, Bhagwati Ind. Estate, B/h. Uttam Dairy, Opp. Dimple Stationery, Amraiwadi, Rakhial, Ahmedabad, Gujarat

Find Popular PIV Chain Dealers in Ahmedabad

top