Heat Exchangers Dealers in Ashram Road, Ahmedabad (53 products available)

We are offering brazed heat exchangers. Authorized alfa laval make brazed heat exchangers range is from 1 to 35 tr suitable with r22, r407c, r134a, r404a aisi 316 plates made in alfa laval italy can be used as evaporators and condensers.

We offer Cooling Tower Elecon cooling tower worm reduction gear units incorporate extended top housing to accommodate the larger wheel shaft bearings maintaining compact drive. These gears are used for equipment like fan for cooling towers and similar other applications.

  Extruded Fin Tubes are heat exchanger tubes mainly required to transfer heat from a flowing fluid and cooling it down by passing air on the fins of the tubes. In extruded fin tubes the surface area of heat transfer is increased because of the increased height of the fins thereby causing it to become more exposed to the flowing air. Moreover in this process the thickness of the fin is also very low causing the heat transfer to become more efficient. The extruded fin tubes are used mainly where the atmosphere is corrosive and the heat transfer required is higher. Extruded fin tubes are mainly manufactured by extruding fins from the base material itself. It is generally manufactured using bimetallic combinations where the base tube can be made of Carbon Steel, Alloy Steel, Stainless Steel, etc and the fin material is Aluminum or Copper etc. In the process of manufacturing Extruded Fin Tube, a Muff Tube (Outer) and a Base tube (Inner) are used. The base tube is inserted inside the muff tube. Then the fining is done by extruding the fins from the Muff Tube. During the process the muff tube forms a very strong bond with the Base tube ensuring almost no air gap or non contact area between the Muff Tube and the Base Tube. There is 100 % contact between the Base and the Muff Tube in Extruded Fin Tubes. This increases the surface area and gives the best heat transfer. In Extruded Fin Tubes, Aluminum Muff Tube covers the Base tube completely and hence gives excellent corrosion protection to the Base tube. This increases the life of the overall equipment and hence reduced downtime with greater efficiency. In Extruded Fin Tubes, the fins are made by Extrusion process and hence have higher strength and resistance to damage my mechanical handling. It s highly suitable for temperatures as high as 300 Deg C. In Extruded Fin Tube, the bonding between the fins and tube is the strongest in the process. During the manufacturing process no damage is done to the base tube and hence it increases the safety and quality of the final product to a great extent. These Extruded Fin Tubes are manufactured by us on State of the art fining machine and can be supplied in the most efficient way. Special processes have been defined to ensure proper safety after packing of tubes. The main application of these Extruded Fin Tubes is in Air Fin coolers especially in highly corrosive atmospheres and high temperature applications. We can provide you the best quality Extruded Finned Tubes. We wait for your valued enquiries

• Voltage: 240 V
• Power: 50-300 KW
• Features: Easy to operate , High performance, Longer service life
• Brand Name: Yamini
• Material: Stainless Steel
• Medium used: Oil
• Frequency: 50 Hz
• Temperature Range: 5-80 Degree C
• Phase: 1

• Material: Metal
• Color: Silver
• Thickness: 1.00mm to 4.00mm
• Size/Range: 10.00mm to 50.80mm
• Specifications: Astm A-213, A-268, A-269, A-270, A-789, Din -17456 & 17458(class-1) U Tubes as per Customers Drawing

• Size: 600 X 300x150 Mm
• Material: PVC
• Application: Roofing, Process Cooling
• Color: Grey, White
• Brand Name: Nilesh

We are leading manufacturer of pvc fills v bar and drift elimitor in india    

• Thickness: 0.10 mm -300 mm
• Temper: F, T6, O, H111, H114, H12, H14, H16, H18, H22, H24, H26, H28, H32, H34, H36, H38
• Alloy: With Alloy
• Usage/Application: Automotive , HVAC, Electrical and Electronic , Aerospace , Telecommunications , Packaging
• length: 500 mm - 5000 mm
• widgth: 300 mm - 1800 mm

A V U Engineers Pvt. Ltd. offers CI Gilled Economiser. CI Gilled Economiser is a mechanical devices intended to reduce energy consumption, or to perform another useful function such as preheating a fluid. 

• Material: PVC
• Color: White
• Surface Finishing: Matte
• Usage/Application: Industrial
• Capacity: 10 LPH
• Size/Dimensions: 1inch

• Usage: Power Generation
• Type: Tube
• Medium used: Air
• Country of Origin: Made in India
• Usages: INDUSTRIAL
• Features: Corrosion resistant, High tensile strength, High functionality

• STANDARD: ASTM A 179 / ASME SA 179

Air preheaters, Air Preheater tubes are essentially a type of Heat exchanger tubes use for the purpose of heating air which is further used in other applications like Boilers, Dryers etc. An air preheater (APH) is a general term used to describe any device designed to heat air before another process (for example, combustion in a boiler ) with the primary objective of increasing the thermal efficiency of the process . The air passing through the Air Pre Heater is heated by allowing the air to flow on the Outer Surface of the tubes which have a highly heated fluid flowing inside through them. The heat is exchanged over the surface of these tubes and which in turn raises the temperature of the Air flowing over it. The heat transfer can further be improved by use of finned tubes(increasing the contact surface area) .

• Brand Name: Sigma
• Compressor Technology: Reciprocating Compressor
• Model Name/Number: SAS-10-15V
• Horse Power: 10 HP
• Power Source: AC Three Phase
• No. Of Cylinder: 3
• Voltage: 230V
• Warranty: 12 months
• Piston Displacement: 149.6 cfm
• Vacuum Pressure: 29.2 inch

IKA hotplates allow for precise and safe heating and tempering due to a platform made from glass ceramics that ensures the best possible chemical resistance. The universal lab hotplates offer a high level of safety due to a fixed safety circuit, the Hot Top Indicator, and the error code display. Functionality, safety, and longevity are the main goals in the development of IKA hotplates.

These Heat Exchanger Tubes mainly find applications in Pressure Vessels, Cryogenic pressure Vessels, High pressure Equipments, Tube sheets of HEAT Exchangers, Boilers, Air Pre Heater, Finned Tubes, Air Cooler Tubes, etc. They are used in lndustries like Refineries, Power Plants, Steel Plants, Chemical Factories, Fertilizer plants, and Ship Building e

We offer the best quality f Air Cooled Condensers to our esteemed clients. Air-cooled condenser is a kind of heat exchanger used in air-condition, refrigeration and other systems.  Our Air Cooled Condensers is highly efficient and delivers high performance. Air-cooled condenser is made up of condensing fin, axial blower, and framework. Available With Double fansTriple fansFourfold fans Features The area of heat transfer is from 100 square meters to 1200 square meterTested on 2.5mpa to 2.8mpa air leakageApplicable to r22, r134a, r404a, r407c systems

• Country of Origin: Made in India
• Material: Aluminum
• Temper: H18
• Grade: Aluminum 5083
• Shape: Rectangular
• Thickness: 80 mm
• length: 2000 mm
• widgth: 500 mm
• Alloy: With Alloy
• Brand: Primacy
• Usage/Application: Industrial

Extruded Aluminium Fin Tubes(bimetallic Fin Tube), Helically Wound High Fin Tubes 'G' Fin (also called "Embedded Fin" or "Edge Grooved Fin") 'L' Fin(Also called "shoulder Tension Fins","Wrap on Fins"), 'KL' Fin (also called knurled 'L' Fins) Integral Low Fin Tubes

Ss fin tube, stainless tubes, Stainless Steel Capillary Tubes

cooling tower nozzle, textile machinery spare part, pneumatic pipe

PHE Plate, Dbl, hvac motors

Mild Steel Pipe

We provide best quality Heat Exchanger Tubes for various types of exchangers. The inspection of Heat Exchanger Tubes is done under Third Party Agencies like DNV, SGS, BVIS, GLI, etc. ‘U’ Bend tubes are extensively used in Heat Exchangers and the ‘U’ tubes are made of Carbon Steel & Alloy steel. We are equipped with the state-of-the-art ‘U’ Bending machines due to which we are able to produce ‘U’ Bend tubes with accurate dimensions. We provide ‘U’ Bend tubes that are subsequently Stress Relieved / Annealed as per client requirements. Moreover, depending on our clients’ request, we also undertake Dye Penetrating test & Hydro test of ‘U’ Bend tubes. Features Accurate dimensionsEasy to installCorrosion resistantWear and tear resistant Specifications SA179, SA192, SA210, SA213 T11, T-12.T22, SA334, BS3059, DIN 17175, St35.8, 37.4, 45.8, 13 CrMo44, 15Mo 910, EN10216, etc

acrylic sheets tubes, Acrylic Rod, delrin sheet tubes, glass fiber sheets

Copper Ring, impeller ip, winding cap, Nut Fastener, Chain, Winding Wire

We are offering high precision & heat exchanger tubing at very market leading prices.

Welding Electrode, Fabrication Steel Mixing, Patta SS

Heavy Column Structure Fabrication, Pharmaceutical Machinery, mixing vessels

Heat Exchanger Tubes, carbon steel, HFW Pipes, Saw Pipes, Stainless Steel

U tubes heat exchanger, Heat Exchanger Tubes, Mechanical Tubes