Back Back
Pvc mist eliminators
Get Price Quote
Aluminium Plates
Get Price Quote
1 Ton (MOQ)
Best Deals from Heat Exchangers
Iepl Condensate Recovery System
100,000 - 200,000 Per piece
Mechanical condenasate pumpthere are condensate recovery unit or power pressure pump use for transfer steamcondensate from plant to boiler feed water tank with help of motive steam or air.working of principal condensate recovery pump or power pressure pump: there are two stage of pump working 1) filling mode: condensate from process will be collected in pump receiver tank due togravity it will open check valve and start filling pumping tank. By this time motive inletis closed and vent outlet is open so there is no back pressure. This will lead level low tohigh.2) pumping mode: as the level reaches set high level vent valve shut off and open the motive steam or air valve. This will allow motive steam or air in tank and push the water level in downward direction. By this time delivery check valve will be open and inlet check valve shut off.when low level reached automatically repeat the cycle. I.e. Shut off the motive valveand open the exhaust.in comman mechanical pump there are mechanical assembly which are very complicated and lot of moving part. It cost is to high. Also ss float puncture with time due to constant expansion and contraction due to temperature variation.while in our system "applied for patent" we avoid complication of the operation. We remove ss float which are puncher after some time. We use special material float which can operate for almost life time. So there are no wear and tear will be there so it's almost maintenance free. Our system will be working for almost it's life cycle.features1. Pump total material are ss 304 material so life is long life.2. Float material is special materials so it will not punctured.3. No moving part assured zero maintenance.4. Suitable for high temp. Application. No cavitations problem5. Can be operated on compressed air.6. Various sizes for different capacities.(max. Cap.12,000 kg/hr)
Stainless Steel Steam Condenser
100,000 Per Piece
1 Piece (MOQ)
heat exchanger fan
72,000 - 165,000 Per Piece
1 Piece (MOQ)
Plate Heat Exchanger
20,000 - 100,000 Per Piece
1 Pair (MOQ)
FRP Cooling Tower Natural Draught NX-SERIES
Get Price Quote
LOUVERS:- the GELCOATED LOUVERS of cooling tower is robust but it is lIght weight made by engineering polymer GRP [GLASS FIBRE REINFORCED POLYMER].we are using premium raw goods to makes structural strength and withstand capacity.it is repairable by skilled person SUPPORTING STRUCTURES:- all supporting structures made by mild steel angles ,flats and round best available in market .it is treated with hot dip galvanizing /epoxy coated after fabrication work done. Treatment gives long life and protection from rust and scale formation. G.I.HEADER AND BRANCHES:- NX-SERIES HAS GI PIPE HEADER AND BRANCHES ARRANGEMENT IS WORKING LONG LIFE IN WORST WEATHER. NOZZLES:- NYLON-6 OR ENGINEERING POLYMER JET CONE NOZZLES FITTED WITH G.I.PIPES SPLASH WATER EACH AND EVERY SPACE OF COOLING TOWER MAKES COOLING EFFECTIVELY
round bottle cooling tower
Get Price Quote
VARUN make induced draft FRP cooling tower is a system based on recycling of water, Which reduces the water consumption, saving energy resulting in low operation & Production costs.VARUN design and offers cooling towers to suite specific requirements, and identifies the cooling tower as an integral part of a process rather than an isolated unit. Cooling tower is designed to enhance efficiency of the process as a whole. Hence, relax when it is VARUN.
Wooden Cooling Tower
Get Price Quote
We hold expertise in manufacturing, exporting and supplying of Wooden Cooling Tower from Gujarat, India. The Wooden Cooling Tower we offer is fabricated in our fully equipped unit under the guidance of skilled professionals. We are capable of addressing small or bulk orders of the Tower. We are offering Wooden Cooling Tower to our esteemed customers across the world at highly affordable rates.
Pultruded FRP Cooling Towers
Get Price Quote
Towertech Global manufactures pultruded FRP cooling towers and general pultruded cooling towers using top grade raw materials and FRP materials. Towertech is among largest Pultrusion manufacturing facilities across the world. It offers cutting edge technology in Pultrusion and Pullwinding processes. Here, in the TowerTech facility, clients can avail superior pultrusion solutions such as pultruded range of cooling towers and many other structural profiles.The rising queries and demand for using the composites in cooling tower applications have been driven by several factors because of the longevity and ease of use. TowerTech Global manufactures and offers comprehensive range of composite products that can be used in both dry and wet cooling towers.
Condenser Tubes
Get Price Quote
We are offering condenser tubes. Standard: astm a179asme sa179 size: od (10-76mm) x wt (1.5-5mm) application: seamless cold-drawn low-carbon steel tubes for heat-exchanger and condenser.
Heat Exchanger
Get Price Quote
A heat exchanger is a equipment built for efficient heat transfer from one medium to another.
Stainless Steel Pipe
Get Price Quote
Stainless Steel Pipe
50 - 500,000 Per Meter
6 Meter (MOQ)
Stainless Steel: ASTM A312 TP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/310/ 347/ 904L etc. Carbon Steel: ASTM A53 GR. B/ A106 GR. B/ API 5L GRADE B/ API 5L GR.X42/46/52/56/60/65/70/Low Temperature, Carbon Steel: A333 Gr.3/ Gr.6 etc. Alloy Steel: ASTM A333 / A335 GR. P1/ P5/ P9/ P11/ P22/ P91 etc. Others: Duplex, Super Duplex, Monel, Nickel, Inconel, Hastalloy, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Copper, Brass, Bronze etc. Types: Round, Square, Rectangular. Size: Upto 48” NB. (Seamless & Welded) Wall Thickness: Sch. 5S to Sch. XXS
Imsubs cabinet coolers
Get Price Quote
General Imsubs, Vortex based cabinet coolers are compact, quick install and maintenance free solution to heating problem often faced in control panels. General Imsubs cabinet coolers are made from Stainless steel and they do not affect safety of panel cabinets. General Imsubs cabinet coolers are available with thermostat control or continuous operation type. General Imsubs Cabinet coolers are provided with pressure relief valves so that safety of panel cabinet is not affected. Cabinet coolers are available in various cooling capacity from 55 to 700 Kcal/Hr (215 to 2800 Btu/H). Multiple cabinet coolers can be coupled to achieve higher cooling capacities. PERFORMANCE : Performance mentioned here is at tube being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure. Cabinet coolers are advised to be used with appropriate drier, where compressed air due point temperature is lower than -25 ° C to ensure safety of control panel. Cabinet coolers are supplied with air distribution kit and customer can optionally order suitable air filters. Available options: Air filter Side mounting kits. Temperature control kit with solenoid valve (Requires AC power supply)
Heat Exchangers
Get Price Quote
Uni-Mech designs (Thermal and Mechanical) and manufactures a complete range of Shell and Tube Heat Exchangers for cooling, condensing and heating application in fixed tube sheets type, floating head or removable “U” tube bundle type to suit different process conditions and to specific requirement of customer. Uni-Mech designs are as per design Code IS-2825, AMSE SEC. VIII, TEMA, API-660 etc. Salient Features : Well engineered to avoid misdistribution of fluid flow High thermal efficiency High heat transfer coefficients and optimum operating cost Stress free tube bundle assembly Heat Exchangers for processes involving phase transition : Condensers Falling Film Evaporators Re-boilers Finned Tube U-Tube Fixed Tube Sheet Removable tube Bundle Coil in Tank Heat Exchangers without phase transition Coolers and pre heaters for liquids and gases Materials of Construction : Carbon Steel Various grades of stainless steel Copper Duplex Steel Hastelloy Titanium Alloy 20
Heat Exchanger
Get Price Quote
We offer heat exchanger. A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.
Air Preheater
Get Price Quote
The main job of an Air Preheater is to recover the heat from furnace exhaust, boiler or thermic fluid heater and return the heat to furnace. Air Pre-heater improves the thermal efficiency. We offer a range of Air Pre-heaters that can be fitted on all types of boilers and furnaces easily. We are amongst the most prominent Exporters and Suppliers of Air Pre-heater in Ahmadabad (Gujarat). Our job is to provide best and the most efficient Air Pre-heater to the customers. We have loyal customers because we offer them with quality product at market leading prices.
Aluminium Plates
300 - 400 Per Kilogram
2 Metric Ton (MOQ)
Air Heat Exchanger
23,000 - 25,000 Per Piece
heat exchanger fans
5,000 Per Piece
1 Piece (MOQ)
Edible Oil Heat Exchanger
Get Price Quote
The Edible Oil Heat Exchanger, provided by us, is reckoned for its sturdy make and long service life. We have a spacious warehouse that is well designed and properly maintained wherein the entire range is securely stored. Our unit is installed with all required amenities essential for safe storage. All those who are looking for a reliable name offering Edible Oil Heat Exchanger can get in touch with us!
fiberglass cooling towers
Get Price Quote
Casing of tower is made of fiber glassreinforced plastic. The cooling tower is designed and constructed for minimum maintenance and long life. You can operate in aggressive environment & resistant water born contaminats. A pre-eminent quilaty and long life fill consists of modular block of PVC honey combs construction to create prolonged contact time of hot air with water for maximum heat transfer. The air pressure drop through the fill is negligible.
Drill Pipe
Get Price Quote
Our clients can avail from us a significant gamut of Drill Pipes.These offered drill pipes are manufactured by making use of supreme quality required basic material that ensure their significant attributes such as longer service life, sturdiness, resistance against corrosion and fine-finish. Furthermore, we purchase used drill pipes from manufacturers situated in Gulf of Mexico and registered with American Petroleum Institute (API) and then process the same at our infrastructure.
Cross Flow Cooling Tower
Get Price Quote
Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm ,Long Shaft Fitment And Vertical Mounted For Better Airlow ,Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .
Heat Exchange Pipe
Get Price Quote
Trader & Supplier of Heat Exchange Pipe. Our product range also comprises of Capillary Tubes And Pipe, Instrumentation Tubing Pipe and Tubular Heater Pipe. With our vast experience & knowledge in the respective field, we are engaged in trading and supplying a wide range of Heat Exchange Pipe.
Heat Recovery Unit
Get Price Quote
Heat Recovery Unit boilers and other fired units to meet customers specific requirement. Innovative energy efficient units like thermosyphon, flash steam generator, evaporator, super-heater and steam boiler accessories can be designed to replace existing traditional systems.
Stainless Steel Pipe
Get Price Quote
We are Importers & Exporters of Stainless Steel, Carbon Steel & Alloy Steel Pipes & Tubes. Seamless SS Pipes are extensively used for conveyance of fluids intended for critical high temperature and general. Seamless SS Tubes are used in Under similar service conditions in heat transfer process equipments like boilers, super heaters, heat exchangers, condensers etc. General engineering and Proscess Instrumentation.User Industries:Chemicals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.Product Range:The following table represents size rang, product standards and materials grades of Seamless Stainless Steel Pipes & Tubes
Gas Heat Exchanger
18,000 Per Kilogram
1 Piece(s) (MOQ)
cooling tower plastic fan
Get Price Quote
Specially designed energy efficient cooling tower plastic fan is of induced draft axial type with adjustable pitch. Materials chosen are non corrosive of plastic. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is factory set and dynamically balanced.
Filter by Localities
