Heat Exchangers Dealers in Vatva, Ahmedabad (136 products available)

Another variant that is offered by us is Cooling Tower We are recognized as a capable Manufacturer, Exporter and Supplier of Cooling Towers based in Gujarat, India. The company has developed a huge in-house production unit for manufacturing them in standard and custom-made specifications. Easy installation, low maintenance and cost effectiveness are some of the key attributed of our Cooling Towers.

We are offering condenser tubes. Standard: astm a179asme sa179 size: od (10-76mm) x wt (1.5-5mm) application: seamless cold-drawn low-carbon steel tubes for heat-exchanger and condenser.

General Imsubs, Vortex based cabinet coolers are compact, quick install and maintenance free solution to heating problem often faced in control panels. General Imsubs cabinet coolers are made from Stainless steel and they do not affect safety of panel cabinets. General Imsubs cabinet coolers are available with thermostat control or continuous operation type. General Imsubs Cabinet coolers are provided with pressure relief valves so that safety of panel cabinet is not affected. Cabinet coolers are available in various cooling capacity from 55 to 700 Kcal/Hr (215 to 2800 Btu/H). Multiple cabinet coolers can be coupled to achieve higher cooling capacities. PERFORMANCE : Performance mentioned here is at tube being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure. Cabinet coolers are advised to be used with appropriate drier, where compressed air due point temperature is lower than -25 ° C to ensure safety of control panel. Cabinet coolers are supplied with air distribution kit and customer can optionally order suitable air filters. Available options: Air filter Side mounting kits. Temperature control kit with solenoid valve (Requires AC power supply)

Casing And Basin:- The Gelcoated Shell  And Basin Of Cooling Tower  Is Robust But It Is Light Weight Made By Engineering Polymer  Grp  [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable  By Skilled Person   Supporting Structures:- All Supporting Structures Made By Mild Steel Angles ,Flats And Round  Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.   Electrical Fan Motor:- Elctrical Fan  Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm ,Long Shaft Fitment  And Vertical Mounted For Better Airlow ,Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .   Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or ‘V’belt Arrangement  For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum,Frp,And Engineering Polymer   Water Distribution Systems:-There Is No Requirement For Water Pressure Just  Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .   ‘V’ Bar Type Fills Packings:- ‘V’bar Diamond Punch Type Fills Resist In Scale And  Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .’V’ Bar Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd   Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .   Z’ Type Eleminator:- Z’ Type Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life. Out Side Z’ Type Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower  Saves Water And Cleanness Near Cooling Tower

• Material: Copper, Aluminium
• Thickness: 0-5mm, 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Length: 1-5Mtr, 5-10Mtr
• Application: Industrial
• Color: Brown, Golden
• Condition: New, Used
• Outer Diameter: 10-20mm, 20-30mm, 30-40mm
• Feature: Durable, Eco Friendly, Heat Resistance, High Strength, Purity
• Single Piece Length: 6 meter

VARUN square type cooling towers work on the principle of counter flow. This means that the water flows down while the air is pulled upwards by a fan. As the water flows further through the system, the air encounters is fresher, in other words cooler and less saturated with moisture.Direct access to internal parts providing easy maintenance and repairs, which is negligible. All materials in making VARUN cooling tower are completely resistance to corrosion and chemicals. It is light in weight and thus permits roof installation without any special reinforcement. A direct driven axial flow fan ensures the system free from problem faced with belt and gear drives.

A heat exchanger is a equipment built for efficient heat transfer from one medium to another.

• Power: 415 V
• Application: FRESH AIR SUPPLY , HVAC SYSTEMS, COOLING SYSTEMS
• Country of Origin: Made in India
• Material: Mild Steel
• Frame Material: Aluminium

The Edible Oil Heat Exchanger, provided by us, is reckoned for its sturdy make and long service life. We have a spacious warehouse that is well designed and properly maintained wherein the entire range is securely stored. Our unit is installed with all required amenities essential for safe storage. All those who are looking for a reliable name offering Edible Oil Heat Exchanger can get in touch with us!

We offer heat exchanger. A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.

The main job of an Air Preheater is to recover the heat from furnace exhaust, boiler or thermic fluid heater and return the heat to furnace. Air Pre-heater improves the thermal efficiency. We offer a range of Air Pre-heaters that can be fitted on all types of boilers and furnaces easily. We are amongst the most prominent Exporters and Suppliers of Air Pre-heater in Ahmadabad (Gujarat). Our job is to provide best and the most efficient Air Pre-heater to the customers. We have loyal customers because we offer them with quality product at market leading prices.  

• Capacity Range: 0.1 m2 to 1000 m2
• Pressure Range: Full vacuum to 100 Kg/cm2 g
• Temperature Range: Cryogenic to 500 °C

Uni-Mech designs (Thermal and Mechanical) and manufactures a complete range of Shell and Tube Heat Exchangers for cooling, condensing and heating application in fixed tube sheets type, floating head or removable “U” tube bundle type to suit different process conditions and to specific requirement of customer. Uni-Mech designs are as per design Code IS-2825, AMSE SEC. VIII, TEMA, API-660 etc. Salient Features : Well engineered to avoid misdistribution of fluid flow High thermal efficiency High heat transfer coefficients and optimum operating cost Stress free tube bundle assembly Heat Exchangers for processes involving phase transition : Condensers Falling Film Evaporators Re-boilers Finned Tube U-Tube Fixed Tube Sheet Removable tube Bundle Coil in Tank Heat Exchangers without phase transition Coolers and pre heaters for liquids and gases Materials of Construction : Carbon Steel Various grades of stainless steel Copper Duplex Steel Hastelloy Titanium Alloy 20

These finned tubes are used where air is corrosive or having more moisture. This gives longer life of Finns. After making complete finned tubes it is cleaned to remove oil, rust & any other impurities & then dipped into molten bath of zinc. This process is costly.

- Steam operated positive displacement pump with no moving parts - Designed as per ASME section VIII div 1 - conformance to international standard Ensures quality design and longer life 

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Heat Exchanger to Chemical Plants the Material. A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.

• Features: Reliable performance, Durable , Superior efficiency, Dimensionally accurate.

• Tower Material: FRP
• Shape: Square
• Features: Corrosion Resistant
• Inlet pressure: 38 kpa

Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm ,Long Shaft Fitment And Vertical Mounted For Better Airlow ,Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

We ultra febtech - an iso 9001:2008 certified company engaged in manufacturing of heat exchanger for chemicals plants machinery .a heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.

• Material: Carbon Steel/ Stainless Steel
• Finishing: Two coats of primer followed by finish paint.
• Capacity: Upto 10000 CFM
• Pressure: Upto 40 bar.
• Cooler Material: Tubes Copper remaining Carbon Steel.
• Max Working Pressure: 3.5 MPa
• Plate material: Carbon Steel.

Backed By The Sound Infrastructural Facility And Experienced Personnel, Our Company Has Been Able To Emerge As One Of The Renowned Manufacturers And Suppliers Of Heat Exchangers. These Exchangers Are Widely Used For Efficient Transferring Heat From One Fluid To Another. Our Range Is Manufactured Using Top Grade Raw Materials Such As SS, Alloy Steel, Cast Steel.   Features : Requires Low Maintenance Multipurpose Usage Efficient Heat Elimination Durable And Stable Made From Reliable Raw Material   Applications : Petroleum Industry Refineries Chemical Plants Petrochemical Plants Natural Gas Processing Industry Refrigeration Industry Power Plants Air Conditioning Industry Space Heating Industry Process Industry

The Air to Air Heat Exchanger, which we provide, is manufactured in confirmation to the set industrial standards. We offer these Air to Air Heat Exchangers at the market leading rates to the clients. Moreover, these Air to Air Heat Exchangers are acclaimed for their durability, high efficiency and low power consumption. Brand Name : Air Tech

• Type: Air-Cooled
• Material: Aluminium
• Shape: Rectangular
• Outlet Temperature: 190 Degree C
• Fin Thickness: 0.15-0.3mm
• Working Pressure: 80-120 psi

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of heat exchangers for chemicals plants .A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.

• Material: Stainless Steel
• Diameter: 24 Inch
• Voltage: 240 V
• Frequency: 50 Hz
• Brand Name: NET
• Outlet Temperature: 150 Degree C
• Power Source: Electric

• Type: Heat Exchangers, Heat Exchanging Machine
• Material: Gun Metal, Metal, Mild Steel, Stainless Steel
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Blue, Brown, Green, Grey, Silver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1 Year, 2 Years
• Driven: Electric
• Operating Temperature: 0-50Deg C, 100-150Deg C, 50-100Deg C

Our organization offering best Heat Exchanger supplying company.