Impact Testing Machine Dealers in Ahmedabad (19 products available)

We are a reputed Manufacturer and Supplier of Aggregate Impact Testing Machine. This machine provides a relative measure of the resistance of an aggregate to sudden shock or impact. The Aggregate Impact Testing Machine offered by us, is well-acclaimed for its accurate results and longer working life. Description & Specifications It consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening Laboratory OvenAutomatic Blow Counter Electronic Balance 500gm x 100 mg / Two Pan Balance.

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.

• Weight: 100-200kg
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year

Reference Standard: Machine is Designed According to ASTM D-1709 OR IS 2508. Specimen Clamping: Pneumatically Operated Clamps have been used to hold film. Release Mechanism: Electromagnetic Supporting of 2 Kg Weight with a Centering device to Ensure reproducible drop. Drop Mechanism: Dart drop mechanism is provide to dart drop at different drop height. Counter: Six digit electronic counters would be provided for counting number of trials. Dart Shaft: OD 6.5 mm and 127.5 mm At list long. Dart & Weight: As per Standard Test Method A & B (As per IS 2508) As per Standard Test Method A & B darts with Hemispherical Heads Acrylic Safety cover is additionally fitted on Clamping device to protect and avoid Damages of dart while drop. Covered Boxes are also provided in the machine to protect Weight Again Looses

Our organization takes pleasure to introduce its business as one of the leading entity Impact Testing Machines Calibration Services . The machines are made available in manual and digital options. The pressure, gauge, mechanism, operation and timely deliveries are tested and calibrated by our experienced engineers. They offer the complete pressure calibration solutions with high capabilities. With outstanding accuracy and hefty digit resolution, these machines can be used in critical industrial applications where precision is most important. Features:Measure temperatureSimulate RTD outputOperable with seven typesApplications:SurgicalTextile RubberR D Labs  

We are offering pipe impact testing machine. Falling height 2000mm height adjustment manually height adjustment resolution ± 2mm striker(dart) aluminum, s.s. (optional) striker (dart) weight as per standard striker (dart) release device pull release free falling mechanism diameter of test sample ø20mm to ø300mm sample clamping on 120° v block paint powder coated

The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories : The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.  

DART IMPACT TESTING MACHINE is generally used to check impact strength of Plastic sheet and Films which are extensively used for packaging industries. Kant Plastology is serving this machine with robust construction and very operational ease mechanical fixtures. The offered apparatus determine the exact test result because of its perfect sample clamping attachment and friction free falling of Dart with dead weights release through magnet. The ease in operation and less maintenance are the key features of the machine.

• Body structure: Fabricated from mild steel material
• Paint: Powder coating
• Steel ball diameters: Chrome steel ball Ø 19 ± 0,05 mm
• Free fall height of the balls: 1 meter
• Electrical Timing Device: To measure the interval between 1st and 2nd impact
• Controller reading: Direct reading in co-efficient of restitution
• Power Supply: 230 Volts, Single phase, AC Supply
• Applications: Instrument for the determination of the resistance to the impact of the ceramic tiles. Determination of the coefficient of restitution by dropping a steel ball from a fixed height onto the test specimen and measuring the height of rebound.

Introduction The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value.   General Description & Specification: Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end.   Optional Accessories: The following accessories are not part of the standard supply and are supplied at an extra cost.   Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.

The Aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accuracy weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. The Apparatus consists of following:- A Testing Machine having a metal base with a painted lower surface of not less than 30cm in diameter. It is supported on level and plane concrete floor of minimum 45cm thickness. The machine have provisions for fixing its base. A Cylinderical cup of internal diameter of 102mm, depth 50mm and minimum thickness 6.3mm. A metal hammer or tup weighing 13.5 to 14 kg the lower end being cylindrical in shape, 50mm long, 100.0mm in diameter with a 2mm chamfer at the lower edge and case hardened. The hammer will slide freely between vertical guides and be concentric with the cup. Free fall of hammer will be within 380 + 5 mm A Cylinderical metal measure having internal diameter 75mm and depth 50mm for measuring aggregates. Tamping Rod 10mm in diameter and 230mm long, rounded at one end.

Digital Izod / Charpy Impact Tester, Analog Izod / Charpy Impact Tester, Impact Tester for Plastic Pipes  

The Izod / Charpy Impact Test is used to measure the relative susceptibility of standard test specimen to the pendulum type Impact load.   The "Saumya" Izod / Charpy Impacto Meter is having a energy range from one joule to twenty-five joules in five different scales.     STANDARDS:   ASTM D 256 AND OTHER EQUIVALENT STANDARDS     APPLICATION:   Impact Strength is the Mechanical property of polymer and as molecular flexibility plays an important role in determining the relative toughness of materials. For any molded plastic this test plays an important roll.   USP:   The "Saumya" Impacto Meter is designed and built according to National and International Standards. Dial with clear and five different scales for energy selection.   The "Saumya" Digital Imecto Meter is having versatile features with high accuracy to measure Izod / Charpy Test upto range of 1 to 25 Joules.   Interchangeable parts for Izod and Charpy test.   Two hammers each for both the test with extra load attachments.  

Applications To prepare correct "V" or "U" notches in Charpy/Izod impact test specimens by means of an accurate multiple-toothed broach Advantages Most simple and accurate Specifically drafted for ferrous & nonferrous material . Skilled operator not required Expensive machines not required Precision regrinding of tools eliminated Less power requirement Very compact in size Precisely cuts the desired notches as per respective standard in just single pass within few seconds. No efforts, all by motorized operation. Just press a push button to start. Equipped with broach guard for safety. Easy removal & assembly of broach Longer broach Life. Ball Screw for uniform cutting action. Hardness rods with LM bushes for smooth motion. Micrometer for fine feed and adjustment Excellent notch finish & Excellent Repeatability. Front door window access for observing the operation Notches confirm to the following standards ASTM A370, BS 131: Part 1: 1961 / Part 2&3: 1972, DIN: 50115, IS/1598/1977

Impact tests are designed to Measure the Resistance to failure of a Material to a suddenly applied force at different Temperature. The test measures the impact energy, or the energy absorbed prior to fracture. We are offering an Izod Impact Test and Chary Impact Test. Machine is calibrated by NABL Calibration agency and certified by NIST. Today it is utilized in many industries for testing materials, for example the construction of pressure vessels and bridges to determine how storms will affect the materials used

• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Blue, Brown, Creamy, Green
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Type: Digital Impact Testing Machine
• Condition: New, Used
• Application: Industrial Use
• Power: 1-3kw, 3-6kw
• Warranty: 1year, 2years

Portable Metal Hardness Tester, Equotip Hardness Tester

Hydrostatic Pressure Testing Machine, Bending Test Apparatus for Conduit Pipe

Mechanical Impact Testing Machine, Topographic Mapping Services

Charpy, Toxicity Tester, HTC LCR-4070 Digital LCR Meter, Analog Multimeter