Industrial Pump Dealers in Prahlad Nagar, Ahmedabad (64 products available)

Head : 20 meter

Capacity : 560 LPM

Supply in standard graded C. I. Construction Non-clog type c.I. Impeller with double mechanical seal and shredding device having free passage of particles in suspension.

Lobe Pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.Rotary Lobe Pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.   How Lobe Pumps Work: Lobe Pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection. 1. As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate. 2. Liquid travels around the interior of the casing in the pockets between the lobes and the casing -- it does not pass between the lobes. 3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure. Lobe Pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in Lobe Pumps than in other PD types. Since the lobes do not make contact, and clearances are not as close as in other PD pumps, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.   Advantages: • Pass medium solids • No metal-to-metal contact • Superior CIP/SIP capabilities • Long term dry run (with lubrication to seals)• Non-Pulsating discharge

Color : Black

Voltage : 15 - 24 VDC

Model Name/Number : DP-125-73-2

Power Source : Electric

Usage/Application : Commercial

Packaging Type : Box

Brand : BNQS

Current : 1.5 A

Horizontal, end suction, centrifugal pump manufacturers, radially split, volute casing process pumps in back-pull-out design, fitted with a radial impeller. Offered with Closed Impeller. 2. Impellers are provided either with Back Vane to minimize Axial Thrust and Gland Leakage. 3. Flange Rating PN 16 and drilled to DIN standard to meet ISO 2858 requirements. 4. Shaft Sealing by, Moulded Graphite Rings.( GRAFOIL PACKING ) 5. Mechanical Seals ( SINGLE SPRING METALLIC BELLOW). 6. Jacketing for Cooling offered for SBox, Casing Pedestal and Bearing- Housing,

Compared with gas, electric and solar water heaters, air source heat pump can provide all-weather hot water with low energy cost. Together with Shanghai Jiao Tong University and other research institutions, Linuo Paradigma has developed a series of heat pump products for both residential and commercial applications and manufactured by the new established production line in Qingpu industrial park, Shanghai, China. All those products adopt world-leading Copeland compressor and high-efficiency heat exchanger, and are manufactured by ISO9001 facilities with strict performance test before ex-factory. The 4.0 COP (Coefficient of performance) of our heat pump system means the operation cost is only 1/4, 1/3 and 2/3 of the electric, gas and solar water heaters’. Besides economical efficiency, heat pump system also has advantages on safety issues since avoiding of electric leakage, heat without water, gas explosion and carbon monoxide poisoning. The air source could be used in 24 hours/day and all weather conditions, which creates air source heat pump the new generation of green energy water heaters.

Country of Origin : India

Type : Lubricating Oil Pumps

Application : Industrial Use

Weight : 10-20kg

Condition : New

Automatic Grade : Automatic

Power : 1hp

Power Source : Motor/Shaft driven

Pressure : High Pressure

Warranty : 1year

Brand Name : Vertex

Fuel : Oil

Usage/Application : Hospital

Material : Stainless Steel

Brand : Bitco pest management

Type : Portable

Model NO : SP-1

Fuselage Size : 1450*1450*500mm

Payload : 20L

Work height : 3-10m

Spray speed : 1-10m/s

Spray efficency : 1500-2000 square meter / munite

Spray time : 15-20 minutes / one-time takeoff

Spray flow : 150-500 ml/minutes (adjustable)

Spray width : 3m (depending on reality)

Dose per square centimeter : 40-250 drop

Anti-wind : 12m/s

GPS hover Accuracy : Vertical ± 0.5m? Horizontal ± 2m

Remote Control Distance : 2 KM

Max. Takeoff Weight : 28 KG

Wheelbase size (motor to motor) : 1400mmm

Wingspan Size : 2.2m

Motor : T-motor brushless

ESC : 100A brushless

Propeller : T-motor 30 inch carbon fiber

Battery : 12S li-po

To manage mosquitoes the way you want to. And you can do it yourself, It helps you manage Mosquito menace, Handy Fogging Machine is most effective for small areas like poultry farmers, bungalows, party lawns housing societies, farm houses schools, etc. Covers small areas effectively Weight just 1.5 kg Use LP-Gas as burner fuel. Noiseless operation. Reliable hand pump for fog output 24 x 7 Spares & after sales Service Coil cleaning system.

Model Number : PM 70A

Number Of Stages : Single stage

Usage : Industrial

Power : 11.5kw

Voltage : 415 V

Frequency : 50-60 Hz

Phase : Three Phase

Being reputed distributors for CRI PUMPS, TEXMO PUMPS, TARO MOTORS and LUBI Motors Neel Enterprise is a trusted provider of more than 1200 varieties of water lifting pumps & Motors.to choose from Wide range of submersible pumps & motors in 3”, 4”, 6”, 8” & 10” available with different materials of construction Products with international quality certifications like ISI, CE,TSE, UR & UL 4500 variety of water pumps & Motors like Submersible Pump, Submersible Motor, Bare shaft Pump, End suction Pump, Pressure Booster Pump, Centrifugal Mon block Pump etc. 

auto fuel pump, auto brake, auto clutch, Auto Engine, Auto Oil Filter

Type : Brand New

Application : in Dialysis machine

Application : Hospital, Clinic

Brand Name : Fresenius

Pay Mode Terms : T/T (Bank Transfer),D/P,D/A

Port of Dispatch : Ahmedabad

Production Capacity : 50

Delivery Time : 7 Days

Packaging Details : Export worth Corrugated box Packing

Minimum Order Quantity : 1 Piece

Compatible with : Fresenius 4008/5008

Model : 6751421

Type : Impellers

Material : Brass, Copper, Metal, Stainless Steel

Shape : Round

Thickness : 10-20mm, 20-30mm, 30-40mm

Color : Golden, Grey, Light Brown, Silver

Usage : Industrial Use

Finishing : Non Polished, Polished

Specialities : Anti Corrosive, Fine Finishing, Good Quality, Strong Strength

Country of Origin : India

Type : Self Priming Pumps

Certification : CE Certified

Condition : New

Automatic Grade : Manual

Driven Type : Electric

Owing to our in-depth knowledge and vast experience in this domain, we have been able to offer premium quality Self Priming Mud Pumps. These pumps are manufactured using excellent quality components and latest technology by our skilled professionals. In order to ensure quality, these pumps are stringently tested on various parameters by our experts. Moreover, optimum performance and functionality are some of the factors that increase the demand of our offered range in the market.

a large assortment of superior quality Hydro Pneumatic System that is highly appreciated in the national and international market. Our Hydro Pneumatic Booster System is perfect for increasing the pressure of the incoming water from the underground and other sources. Our Hydro Pneumatic Pressure System offers complete solutions related to the water pressure problems. Hydro Pneumatic Booster System is extensively used in hotels, industries, homes and in various other places for the distribution of water.

Model : CRM40T

CAPACITY, L/HR. : 10-40

NO. OF PUMPS : 3 Nos.

EACH HOPPER CAPACITY LITER : 8 Liter

NO. OF HOPPER : 3 Nos.

ELECTRIC SUPPLY : 220V, 50HZ, 1PH

OVERALL DIMENSIONS : 450 mm (L) x 740 mm (W) x 1310 mm (H)

  RIPPLE PUMP MACHINE FEATURES S.S. 304 Self Supporting Frame & acrelic hopper cover. All Contact Parts Of S.S. 304. Complete With Internal Piping and By Pass Arrangement. Complete With Pneumatic Cylinders And Accessories. Easy movable pedal wheel with lock for machine sifting. Inbuilt stand for air compressor. Individual on-off Switch with indicating lamp & Regulator for speed regulating.

Material : Mild Steel

Machine Type : Pneumatic

Solar Water Pumps, Biodiesel, Solar Water Pumping System, Solar Water Pumps

Rotary Pumps, Casting, Submersible pumps

Solar Water Pumps, Home Lights, Solar Lanterns, Hot Water Systems

Single Stage Water Vacuum Pumps, Oil Wiper Rings

Brass Impeller, brass assemblies, Brass Fitting, Brass Electrical Parts

With us, buyers can stay completely assured for top-notch products as we make use of the premium material and modern work methods for preparing them. Besides, the material is sourced from the genuine places. Our packaging materials can retain the products' quality and newness even under extreme shipping and handling conditions. Our packaging provides optimum physical protection.

The screw pump is used in a sludge digester to keep the sludge in a thoroughly intermixed condition.