Laboratory Apparatus Dealers in Sarkhej, Ahmedabad (23 products available)

Ecg instrument input input way floating and defibrilation protection lead standard 12 leads patient leak current 3.2s cmrr >60db, >100db(add filter) enduring polarization voltage ±500mv noise level 15µvp-p.

• Size: 8 Inch
• Material: Metal
• Condition: New
• Applications: General Engineering Sectors
• Power: Manual
• Media: Water

• Bottom diameter: 20 Cm.

the oldest, most widely used test for determining workability. This test is used to determine the workability of fresh concrete, which would normally be undertaken at the point of delivery to ensure the concrete, is of adequate consistency for placement. The test is applicable to concrete of medium workability.the device is a hollow cone-shaped mould. The mold is filled in three layers of each volume. Each layer is rodded with a 16mm steel rod 25 times. The mould is then lifted away and the change in the height of the concrete is measured against the mould. The slump test is a measure of the resistance of concrete to flow under it own weight. general description and specifications : the apparatus comprise of a slump cone with handles made of mild steel sheet, a chrome plated steel tamping rod of 16 mm diameter x 600 mm long, rounded off at one end, with a scale marked on it and a steel base plate with a carrying handle.the mould for the test specimen will be in the form of frustum of a cone having the following internal dimensions as follows. dimensions cm. bottom diameter 20 top diameter 10 height 30 the cone is constructed of metal of at least 1.6 mm thickness and the top and bottom are open and at right angles to the axis of the cone. The mould have a smooth internal surface and provided with suitable foot pieces to a base plate and also handles to facilitate lifting it from the moulded concrete test specimen in a vertical direction as required by the test. The base plate is provided with cleats & swivel handle. optional accessories : concrete scoop.funnel for pouring concrete in cone straight edge

• Material: Cast Iron
• Type: Y
• Surface Finishing: Paint Coated
• Media: Water,Oil,Gas
• Pressure: Up to 200 Bar
• Automation Grade: Automatic
• Technique: Hot Rolled

• Display Type: Mercury & led display both available

Yash filters is engaged in supplying a comprehensive range of basket strainer. With long years of meaningful experience in the industrial filter industry, yash filters able to manufacture and supply best quality range of basket strainer. Our basket strainers are designed for liquid and gas applications. Our basket strainer are highly useful in various industries such as pharmaceutical, petrochemicals, chemical factories, etc. These basket strainer, are made from best quality material, moreover, we offer customized solutions to our clients as per their individual specifications for basket strainer.

Using the apex quality of raw material, we manufacture the finest quality of Strainers. Y-type strainers manufactured by us are renowned all over for their designs. The industrial strainers come with an assurance of being in proper working status even in intense conditions. The main reason for that is our unsurpassed quality. We manufacture these products by newly imported machinery. We hold a wide customer base all over. By providing the best quality we are the most reliable brass strainers suppliers from India. With the pledge towards serving our customers with the best quality of products we are surging ahead towards becoming the largest manufacturer in India. SABA make "Y" type & Basket type strainers (Bolted Cover) have low pressure as higher flow area is provided through screen. SABA make Y" Type Strainers remove the foreign particles from the flowing liquids, Air, Steam, and Gases by means of perforated or wire mesh straining element. The strainer improves the clearance in the medium, and prolongs the life of valves, protect expensive pumps, instruments and other equipments.SABA make "Y" Type Strainers can be installed either in horizontal or vertical position. However, in both the cases, the screening element should be kept the “down side” of the strainer body so that the suspended particles can be properly collected. These strainers are available with drain plug which can be replaced with Ball Valve for frequent blow off.SABA make Strainers are available in wide variety of body material, pressure ranges and screen sizes for various suitable applications.Design Features : Design for more than 2.5 times Pipe Bore free Straining Area ensures a low Pressure Drop at even 50% clogged conditions allowing for a lesser down time for cleaning elements. For a higher efficiency specially designed Strainers are provided with a higher free straining area. Caged straining elements prevent crumbling of elements at even high flow velocities. Drain plugs provided in non corrosive material at the lowest points on the cover enables draining efficiency. Material Structure : End Connection Flanged end raised face, Butt weld end, RTJ, etc. Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel (in Cast & Fabricated construction)SCREEN(MESH) 304, 304L, 316, 316L, 321 etc. Standards Applicable : Design Standard : Manufacturer standard Testing Standard : API 598/ EN 12266 -1 Face to Face : ASME B 16.10 End Connection : Flanged End : ASME B 16.5 Butt Weld End : ASME B 16.25 Pressure Temperature :ASME B 16.34    

We believe in keeping transparency in the transactions and thus we offer an invoice to the clients stating all the necessary details. We undertake both online and offline payment processing methods. As one of the leading Suppliers, we keep our quality in synchronization with our reputation and offer the best Vicat Softening point apparatus to the buyers.

• Country of Origin: India
• Size: 0-15Inch, 15-30Inch
• Type: Y Strainers
• Material: Iron, Metal, Stainless Steel
• Shape: Y Shape
• Thickness: 10-15mm
• Certification: ISO 9001:2008 Certified
• Mesh Size: 10-100cm, 100-200cm
• Application: Liquid Use
• Grade: ANSI, AS, ASME, ASTM, BS, DIN, IS
• Color: Grey, Metallic, Shiny Silver
• Feature: Corrosion Resistance, Dimensional, Durable, Hardend & Temper, Heat Resistance, High Quality, High Tensile, Non Breakable, Rust Proof
• Surface Finishing: Polished
• Technics: Black Oxide, Hot Dip Galvanized
• Brand Name: VED
• Temperature Of Media: water,oil,gas,steam,chemical
• Product: C.I
• Product: S.S
• Product: M.S

• Type: Lump Test Apparatus
• Material: Mild Steel, Stainless Steel
• Certification: ISO 9001:2008
• Application: Lump Testing
• Color: Brown, Grey, Light White, Off White, Silver, White
• Condition: New
• Phase: Single Phase
• Warranty: 1yrs

We are the main supplier of this product.

We are offering electric suction appratus at very market leading prices company.

• Voltage: .2 HP to 5 HP
• Color: Silver
• Material: SS
• Phase: 3 Phase
• Capacity: 1440 RPM
• Model: Standard
• Brand Name: Advance Engineering

Medical Equipments, Walker, defibrillator machine

chromatography equipment

PFT Digital Spirometer, reclining wheelchair, Commode Wheelchair

Lab Testing Induction Melting Furnaces, Copper Processing Plants

orthopedic medical devices

Surgical Items, Hand Gloves, Scissors, Surgical Tray

Medical Equipments

Defibrillator, Ultrasound Portable System, Medical Infusion And Syringe Pump

Y Type Strainer, Gate Or Sluice Valve Non Rising Stem, hexagon bushing