Lubi Valves Naroda, Ahmedabad, Gujarat

The Lubi LTV Series Triple Duty Valves save space and reduces purchase and installation costs by combining all the functions normally required on the discharge side of most HVAC systems into one convenient design. It features a calibrated balance valve, non-slam check valve, and positive shut-off valve all combined into one. Variety & Range • Valve Size : 2.5", 3", 4", 5", 6" 8", 10", 12". • Available Configuration : Straight & 90 Degree.  • Flanges : as per PN16, PN25, ANSI125 and ANSI 250. Applications • HVAC Chilled Water Plants for Air Conditioning of Buildings Shopping Malls, Auditoriums, Sports Complexes, Airports, etc.  • HVAC Chilled Water Plants for Industries like Pharmaceuticals, Food & Beverage,  Chemical Manufacturing etc. Features & Benefits• Performs as spring-loaded non-slam check, balancing, shut-off and throttling valve. • Soft seated and accurately guided spring loaded disc ensures a leak free seal. • The triple duty valves have been designed using CFD techniques to minimize head loss. • Valve can be inline or 90° degree configuration.  • Drain Plugs are provided at inlet and outlet of valve. • Compact Design. • Spring-loaded disc ensures positive sealing and eliminates chatter.

The Lubi LSD Suction Diffuser is a device which directly mounts to the suction side of horizontal or vertical centrifugal pumps. Variety & Range • Suction Diffuser Size : 2.5", 3", 4", 5", 6" 8", 10", 12".   Applications The main applications of this valve is for general utility water applications as well as HVAC applications. ​ • General Water Applications. • Fire Applications. Features & Benefits • Available in PN 16 & PN 25 as per DIN standard EN 1092-2, with flanged connections. Flanges with ANSI 125 & ANSI 250 are    available as per ASME B16.1. Grooved end flanged connections are available on request.  • Available with equal or reduced outlet flanges. • Cast on supporting pads for convenient mounting of standard I.D support foot. • Drain/purge plugs is used to drain the suction diffuser when required. It has an in-built magnet to trap small metallic particles. • Available suction gauge port. • 'O' ring seals body cover. • Quick opening bolted body cover minimize down time while cleaning the strainer.  

• We design & manufacture the Lubi FLBV series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications. • It is a type of quarter turn valves which means that the valve can be fully opened or closed when the disc is rotated a quarter turn. Variety & Range • Valve Size : 50, 65, 80, 100, 125, 150, 200, 250, 300. • Test Pressure (Hydrostatic Shell) :  PN10 - 15 bar (217.5 psi), PN16 - 24 bar (348.0 psi) • Maximum Working Pressure :  PN10 - 10 bar (145 psi), PN16 - 16 bar (232.0 psi) • Maximum Working Temperature:  110°C (230°F) Applications The main applications of this valve is for general utility water applications as well as FIRE applications. ​Features & Benefits • On/off isolation • Dead-end service/removal of down stream piping • Industrial process water piping • Municipal raw water intake • Municipal chlorinated water systems • Full vacuum • Aeration and blower applications.Butterfly Valves are easy to open & close. • They are easy to install due to their compact design & less space requirements at the place of installation. • We provide Tight Sealing due to close interference between disc & liner. We also provide a Triple Stem Seal which prevents any    leakage and also any foreign particles from entering the valve. • The flow control lever as well as the gear unit are designed such that very low torque is required for controlling the valve. Also, the    hand lever is lockable in order to lock the position of disc in open or close positions. • These valves have very less pressure drop & high pressure recovery. • We provide all our valves with Red Powder coating which gives better corrosion resistance & hence gives long lasting life.

The lubi lar series air release valve are  designed and manufactured for fire applications.variety & range • valve size : 3-4"applications water supply fire fighting  hvac features & benefits • single body incorporates both features within one valve – more compact and economical • dual body consists of two independent valves – allows individual maintenance while still protecting the pipeline –wider range of sizing options • inlets and outlets are equal to full nominal size • unconditionally guaranteed stainless steel floats • stainless steel 316 internal trim • non-clog design eliminates backwashing • exclusive high/low pressure resilient seating.