NON METALIC PUMP ( POLY PROPYLENE PUMP)
M.O.C P.P PUMPS P P CENTRIFUGAL PUMPS
Non Metallic Centrifugal Pump
15,000 Per
02 Piece(s) (MOQ)
Motor Horse Power : 7.5 hp
Motor Phase : Three Phase
Material : PP
Type Of End Use : Industrial
Power Source : Electric
Cooling Method : Air Cooled
Motor Speed : 2900 RPM
Head : 25m
Power : 2.2 kW
Frequency : 50 Hz
Voltage : 415 V
Country of Origin : Made in India
Stages : Single Stage
Pump Type : Non Metallic Pump
Automation Grade : Automatic
Impeller Diameter : 160mm
Suction : 75mm
Non Metallic Axial Flow Pump
Flow up to : 2500m3/hr
Head up to : 10 mtr
We offer Non Metallic (FRP) axial flow pumps with following specifications: It is unmatched in the industry for low head/high capacity pumping requirements especially when highly corrosive or abrasive solutions or slurries are involved. Extended service life, mechanical reliability, custom designs and a wide range of materials allow the model AF to pump practically any liquid * Range of coverage : Material of construction:FRP/Non Metallic Axial Flow Pump.
non metallic pump
9,500 Per Piece
1 Piece (MOQ)
Country of Origin : Made in India
Features : Easy Installation, Low Maintenance due to minimum componets, Noise Less.
Usage/Application : Acid, Acidic Water
I Deal In : New Only
Features : Easy Installation, Low Maintenance due to minimum componets., Noise Less
non metallic pump
9,600 Per Piece
1 Piece (MOQ)
Country of Origin : Made in India
I Deal In : New Only
Material : PP,GRP,PVDF Etc.
Capacity : upto 45 m3/hr
Brand : Ganesh Pumps & Engineers
Model Name/Number : GPP
Temperature : upto 100 Degree C
Speed : upto 2900 rpm
Motor Phase : 3 phase
Non Metallic Centrifugal Pump
12,000 Per Piece
Motor Horse Power : 1 HP, 2 HP, 3 HP, 5 HP, 6.5 HP, 8 HP, 10 HP
Type Of End Use : Agricultural, Industrial, Firefighting
Motor Phase : Three Phase
Material of Construction : Cast Iron, Stainless steel, Steel
Minimum Order Quantity : 1 Number
Non Metallic Polypropylene Circulation Pump
17,500 Per Piece
1 Piece (MOQ)
Material : Polypropylene
Voltage : 220V
Country of Origin : Made in India
Model Name/Number : FPP Series
Max Flow Rate : 50 m3/Hour
Head : 45 mtr
Frequency : 50Hz
Usage/Application : Industrial
non metallic pumps
The complete pump-rotating element can be withdrawn towards the motor end without disturbing the suction or delivery pipeline, due to back pull out design. The motor remain fixed to base plate. The pump rotating element can easily be dismantled into its component. After reassemble no time consuming Re-Alignment is necessary.
Non Metallic Chemical Process Pump
Head : Up to 40 MTRS
Flow : Up to 50 M3 /HR
Motor HP : 1HP to 7.5 HP
Material of Construction : Poly Propylene, M.S., C.I., S.S
We are occupied in contribution Non Metallic Chemical Process Pump to the clients. The limited reverberation design of these pumps improve their competence and presentation. Furthermore, these pumps are extensively valued for their dependability uncomplicated operation and low continuance. We have Non Metallic Pumps, straight fundamentally rip one piece volute covering intend fixed with partially open impeller solitary entry single stage. Non-Metallic Chemical Process Pumps obtainable by us are robust in structure that ensure high presentation with low continuation. These non metallic chemical process pumps are extensively respected for their dependability, easy operation .the pumps are affected in 20 models with utmost inter irregularity. The pumps are appropriate for flood rate up to 400 m3/hr with head individual 100 mts of liquid column. Advantages Non Metallic Chemical Process Pump:- No mechanical seal filling box required. All the wet parts are in P.P. & Teflon structure with stand deterioration & attrition. No foot valve necessary to lift from unconstructive suction No. leakeges quandary just like gland or mechanical seal Normal continuation Easy Eliegment
Non Metallic Centrifugal Pump
Head : up to 45 meters
Capacity : up to 100 m3/hr
Temperature : Max. Temp. up to 70* C for PP MOC and 150* C for PVDF MOC
Pump Speed : 1440rpm , 2900 rpm
Design features : Go to Top PP / PVDF -series pumps are specially design for highly corrosive chemicals in which metal pumps are not recommended or in its cost is higher. The PP- series pumps design are single piece molded polypropylene volute casing with semi-open impeller and casing cover to ensure a smooth running performance against corrosion. The high allumina ceramic sleeve protects shaft to any corrosion and abrasion. The GFT or Sic Vs. Ceramic PTFE below Mechanical seal prevents the leakage from the pumps. The Cast Iron heavy duty oil lubricated bearing housing provide maximum strength to pump. The pumps are also available in Mon-block version with compact design. The PVDF series pump thick walled casing liner & back plate is made of PVDF. A large metal insert in PVDF impeller increased mechanical strength. The PP Series Polypropylene Pumps are also available in monoblock version with compact design. Application For handling highly corrosive acids, alkalis, hydrocarbons, effluent, slurries, and other chemicals like; HCL –33%, Dilute H2so4, Caustic solutions ( NaOH ), HF, H3PO4, HN03, Alum, NaoCl, Feso4, CusO4, FeCl3 etc. The pumps are also used in scrubbing of corrosive gases like Cl2, Br2, F2, I2, So2, So3, Co2 etc. as scrubber pump in various chemical industries, in Pickling process in Steel Rolling Mills, Acid circulation in electro plating industries, decaling in boilers, heat exchangers etc.
non metallic pumps