Plate Load Test Equipment Dealers in Paldi, Ahmedabad (18 products available)

The apparatus comprises of the following - Loading Unit : Supplied with loading yoke with direct and lever for applying load. Normal stress capacity 8Kg/Sq.cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading. yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.Consists of loading unit, shear box assembly for 60 mm x 60 mm x 25 mm complete with two halves of loading pad, one base plate. All made of gunmetal with two porous stones. Share box housing of gunmetal, specimen Cutter of steel with set of weight to give normal stress of 3 kg/cm2. through lever as follows. OPTIONAL ACCESSORIES : Dial Gauge 0.01 mm x 25 mm travel High sensitivity proving ring 200 kg. fitted with 0.002 mm dial guage with our calibration certificate in a case. Shear box complete with two plain gripper plates, two perforated gripper plates, two porous stones, one top loading pad, one base plate and U-bracket. 60x60x25mm.Made of Gunmetal Spare Housing.

Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size.It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.

Temperature : Ambient to 50°C

Accuracy : Better than ±0.3°C

Complies to all current USP, EP and other pharmacopoeia, Supports 2 test baskets & Quick release basket design, Compact, user-friendly operation, Connectivity with PC -Compatible keyboard for feeding product information, Selectable type of Disintegration: normal basket suppository basket, Incorporated the Code of Federal Regulations (21 CFR Part 11) feature of password protection (3 level ADMIN, SUPERVISOR and USER Password)

Voltage : 220/230 V

Integral type Proving Ring capacity : 3000 kgs.

Capacity : 50 KN

Constant : 50.8 mm/minute

Gauge : 0.01 x 25 mm

Soil compaction is a fundamental requirement for the construction of earth fill for dams, reservoirs, canal embankments, highways, railways and runways. The relationship between soil moisture content and compacted dry density is very useful for deciding construction specifications and quality control of compacted earthfill. While designing a soil retaining structure, the strength and deformation behaviour of soil is evaluated by testing soil specimen compacted to the density as would be achieved during construction. The construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength.

bitumen testing equipment, aggregate testing equipment, Cube Mould

A perfect organization always make sure for the all the product to be manufactured under all the possible atomization which in result can give the perfect shape as the requirement or the need of the market. Following the same rule since more then 5 decades we are trusted manufacturer and supplier of “MARSHAL STABILITY TESTING APPARATUS” to the industry. Having a wast workshops equipped with all the necessary machinery our team used the raw material which are high grade in quality. They also follow all the parameters and norms set by the industry. Our Marshal Stability Testing Machine is used in evaluation & designing paving mass of Bituminous. We provide 2 different type of machine. “Marshal Stability Test Apparatus” & “Modified Marshal Stability Test Apparatus”.

Model Name/Number : DRA

Packaging Type : Wooden Box 

Brand : Frontline

Usage : Laboratory

Driven Type : Electric

Stroke : 50mm. Approx. 30 strokes/min

Setting : Digital

Heater : 500 watts stainless steel

Temperature : Amb. To 45. 0C,

Temp. Controller : Digital with pt-100 sensor

Timer : Microprocessor based digital 00. 01 to 99. 99hrs.

Overall dimension : 375 w x350d x550 mm h

Accuracy : + 0. 50C

Features: Hassle free functioning Corrosion resistance Accurate outcome Easy to use  Compliance with following International Standards IP 124, ASTM D665, ASTM D3603   Brief construction details Rectangular reservoir (Inner chamber) constructed of 16 SWG, stainless steel with drain cock. Outer body made of 20 SWG, CRCA sheet duly powder coated. Thermal insulation provided in between the walls to prevent loss of temperature. Constant temperature oil bath is fitted with motorized stirrer  to maintain temperature at 60 °C ± 0.5 °C Oil immersion heaters are fitted to dissipate uniform heating. Temperature, speed and time are digitally indicated. Microprocessor based PID temperature controller with two  displays for set and process value. PT-100 sensor with 0.1 °C resolution on digital display. The bath can accommodate at least four test samples at a time with combined motor for each position Motor is mounted on ball bearing, driven by belts and pulleys. Supplied complete with 4 Nos test Beaker (400 ml) of Borosilicate glass with dimension as per ASTM standard. The test beakers are securely held in the bath by spring clips and are fitted with acrylic covers, dimension as per ASTM standard.   Details about Timer & Stirrer The unit is having motorized stirrer with digital RPM meter with proximity sensor to monitor the stirring speed. Stirrer rotates on its longitudinal axis at 1000 ± 50 rpm. Stirrer will be made of stainless steel as pr standard dimension given in the method. Test rod is also made of steel conforming to grade 10180 of specs A 108 BS 970 Part 1:1983-070M20 with dimension as per standard. In-built timer is provided in apparatus which stops the stirrer at pre-set time.   Technical Specifications Temperature range    : Ambient to 100 °C  ± 0.5 °C Stirrer Speed            : Up to 1000 rpm, ± 50 revolution/minute Power supply           : 230 Volt + 10 %, 1 phase, 50 Hz   Following accessories are supplied along with the equipment 1)    Thermometer ASTM 9C, ASTM 20C & ASTM 21C (1 each)  :  3 numbers 2)    Steel Test Specimen                                  : 4 numbers 3)    Test Beakers (400ml) with covers           :4 numbers 4)    Beaker cover (PTFE) for ASTM D665      : 4 Numbers 5)    Teflon holder (PTFE) for D665                 :4Numbers 6)    Auxiliary Stirrer Blade for ASTM D665 Procedure C (heavier than water fluids)  : 1 Number

Type : Disintegration Tester

Displacement : 55mm

Power : AC/230 volt Single Phase

Drive : 1/8 HP

Heater : 125 watt.

ESCR Test Apparatus, air circulating oven, Pipe Notch Cutter

Soil Resistivity Meter, Slab Trolley with Rails, electrical meter

soil testing equipments, Concrete Testing Equipment

California Bearing Ratio Test Apparatus, Conditioning Chamber, Slab Trolley

Sand Equivalent Test Apparatus, Colour Matching Cabinet, Toxicity Tester

Collapse Test Apparatus, 6250IN Insulation Resistance Tester

Copper Purity Test Apparatus, high voltage test set, HV Spark Tester

Marshall Stability Test Apparatus, Slab Trolley with Rails, Bitumen Extractor