Back Back
water FILTERS PLANT
In its passage from the clouds to the tap, water comes in contact with many different substances, including gases, minerals, and organic matter, which are carried either as solid particles or are completely dissolved in water.A wide variety of filters are available to remove the numerous different contaminants found in water. The specific type of filter required in the home depends, of course, on the kinds of impurities in the water and the amounts present. Basically, filters provide a screening which traps the contaminants in the water as it flows through the filter. If the contaminated particles are large enough, the filter simply traps them. In other cases, a chemical reaction may first be necessary to make the particles of sufficient size to permit their collection on the filter media. IRON FILTERS (OXIDIZING FILTERS)Iron/oxidizing filters are used for treatment of waters with medium concentrations of iron, manganese, or hydrogen sulfide. Iron appears in water in both a ferric (visible and insoluble) and a ferrous (dissolved) state. While ferric iron can be simply filtered from the water, ferrous iron must be oxidized, converting it to the suspended ferric state, in order to be filtered out. The media used in these iron filters is manganese green sand, which is capable of oxidizing dissolved iron and manganese, allowing them to be filtered out in the same tank.Iron/oxidizing filters must be periodically backwashed, to flush away accumulated deposits, then regenerated. After rinsing, the filter is again ready for operation. When such filters are used, they are, in most cases, placed ahead of a softener.SAND FILTERSThe sand filter is used for the simple filtration from water of visible dirt or suspended matter (turbidity) due to silt, sand, organic matter, and rust type particles. These units use sand or gravel as the filter media, and are effective in removing sediment and cloudiness from water, except when such turbidity is due to extremely fine particles. Sand filters must be backwashed periodically to clean the suspended matter from the filter media and flush it down the drain.ACTIVATED CARBON FILTERSActivated carbon filters are primarily used to remove objectionable tastes and odors from water, and are effective in removing chlorine. These filters contain activated carbon, a form of charcoal with high adsorptive qualities. Adsorption is defined as the adhesion of a gas, vapor, or dissolved material on the surface of a solid. As water is brought into contact with these activated carbon particles, the taste and odor constituents are retained in the carbon, resulting in a taste and odor free water. Activated carbon filters have also proven effective in the removal of inorganics such as trihalomethanes. The granulated filters must be periodically backwashed, and the cartridges cleaned or replaced from time to time.NEUTRALIZING FILTERSTo increase the pH value of a water, which is to decrease the acidity and thus its corrosive nature, a neutralizing filter is recommended. The presence of large amounts of free carbon dioxide gas in solution (carbonic acid) renders a water acid in character, which can cause corrosion damage to the metal components of a water system, including the water pump, piping (iron, galvanized brass, and even copper), tank, water heater, and fixtures. Neutralizing filters contain a bed of materials such as calcite and magnesia. As water passes through this bed, the carbonic acid is neutralized and a small amount of the bed is dissolved. As a result, the water becomes more alkaline (higher pH value) and thus less corrosive. A neutralizer requires occasional backwashing to loosen the material and clean the bed. From time to time, additional material must be added to the bed to replace that which is dissolved.CHEMICAL FEED PUMPSChemical feed pumps are used to inject corrective solutions into a water supply. For example, soda ash, a highly alkaline compound, is often added in solution to a water supply as an alternate method for reducing acidity. Chemical feed pumps can be wired to operate in conjunction with an electrically operated well or water pump, and multiple solutions can be fed into a water system with a single pump unit when applicable. Chemical feed storage tanks are occasionally an attractive solution to water treatment problems because several chemicals can be mixed and fed together, thus solving several problems at once (e.g. Chlorine for purification and acid neutralizer for pH control). Chemical feed storage tanks must be refilled with the chemical compound periodically.Advantages :- » Better testing, quality, chlorine free water in your entire home » Great for drinking, bathing, cooking and all uses » Healthier skin, hair and body systems » Easier to wipe off & clean up » Reduces drying time & heat » Environmentally safe, no brine discharge » No salt or chemicals added » No maintenance costs » As they require little or no mechanical power, chemicals or replaceable parts, and they require minimal operator training and only periodic maintenance, they are often an appropriate technology for poor and isolated areas.
...more
Softening Plant
Softening is a process where Calcium and Magnesium ions are exchanged for Sodium ions. Calcium and Magnesium ions associated with Alkalinity contribute for scale formation. These ions are also called as Total hardness. The strong acid cation ion exchange resin in Sodium form is used for softening the water. When the resin is exhausted, it is regenerated with brine solution ( Sodium Chloride ) 10% or 15% brine solution is normally used for the regeneration. If the brine solution is passed from the bottom of the resin and service flow is from the top, then it is called as Up flow softener. If the service and regeneration flows are from top to bottom, then it is called as down flow softeners. The softeners are run up to the Hardness slip of 5 ppm as CaCO3 in the treated water which is called as Industrial Zero hardness. Product Description :-Industrial Upflow Softeners are manually operated and designed to suite the requirements of medium scale industries. They incorporate the prove technique of counter flow regeneration. The unit thus produce treated water with low residual hardness throughout the cycle.A strongly acidic cation exchanger in sodium form is used to exchange sodium ions for the hardness forming calcium and magnesium, thus producing soft water. At the end of each service cycle, the ion exchanger is regenerated with sodium chloride solution, after which the unit is ready for the next service cycle.For introducing the brine into the unit, a hydraulic ejector with control valve, suction and delivery piping are provided. A combined salt tank which can hold sufficient quantity of salt for a number of regeneration is provided.The unit is supplied in a knocked-down conditions and is easily assembled at site. To meet special requirement, these softeners can be supplied for automatic operation.Advantages :- » Consistent treated water quality » Easy to install and operate » Produces clear, soft and non-scale forming water » Low operating costs » Incorporates high capacity polystyrene bead type cation exchange resin which is remarkably » stable and has a long lifeApplications :- » Boiler feed » Process water in textile mills » Beverage manufacture » Laundry and air conditioning plants » Cooling tower make-up » Jacket cooling » Bungalows
...more
Reverse Osmosis Plant
Introduction :-The Reverse Osmosis process uses a semi-permeable membrane to separate and remove dissolved solids, organics, pyroxene, submicron colloidal matter, viruses, and bacteria from water. The process is called "reverse" osmosis since it requires pressure to force pure water across a membrane, leaving the impurities behind. Reverse Osmosis is capable of removing 90%-95% of the total dissolved solids (TDS) and 99% of all bacteria, thus providing safe, pure water.The reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. The RO process is the reversal of flow through a membrane from a high salinity, or concentrated, solution to the high purity, or permeates, stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane. Product Description :-Pure Sip Series of Reverse Osmosis are field proven, highly reliable and cost effective answer to treat a wide range of brackish waters. Designed with flexibility, the series utilize state-of-the-art spiral wound reverse osmosis membranes to suit a given application. These systems can remove 90%-95% of total dissolved salts.Features :- » Product flow rate 1.5 - 32 m3/hr ( 4.4 - 140 GPM) » Salt rejection ranges from 90 to 95% depending upon feed water composition » Product recovery ranges from 50 to 80% based on feed water composition » Electrical 415V,3 phase, 50Hz » Concentrate discharge directed to drain at 'O' ring psiApplications :- » Ultrapure water for electronic industry » Ultrapure water for pharmaceutical industries » Process water for manufacturing plants » Boiler feed water » Beverage and food processing industry » Drinking water » Wastewater » Bio-technology » Mineral Water
...more
Pure Sip RO Commercial PLANT
• Rejection of TDS# 90% Approx.• Electric Supply 220V 50Hz AC• RO Water Output 25 Ltrs./Hr. > 7 Stage Purification• RO Water Output 50 Ltrs./Hr. > 9 Stage Purification• RO Water Output 100 Ltrs./Hr. > 7 Stage Purification
...more
hydropneumatic booster pressure PLANT
We offers a wide range of applications catering to four major segments viz. Building Services, Industry, Municipal Water Supply / Irrigation and Environment. Pioneering the extensive use of fabricated stainless steel in pump construction that results in lightweight, space saving, highly energy efficient pump sets. Pure Sip have produced a range of extremely reliable hydro-pneumatic booster units, which offer a high degree of flexibility besides substantial energy savings. Our range of pressurized booster pumping sets broadly include, fixed speed sets and variable speed sets with advanced controls for regulation, monitoring and communication supplied as turnkey system (with valves, pipe work etc.) ready for installation. Application :-Pure Sip's Packaged Constant Pressure Booster Systems are designed to meet to ever-increasing demand of variable flow in high-rise, commercial, municipal and industrial buildings. The PLC based systems are available in Vertical and Horizontal configurations. Easy to select and install, pre-engineered duplex and triplex units are available for quick delivery. Each system is performance tested for trouble free operation and ease of installation and start-up.Operation :-A Pressure Boosting Set primarily consists of pumps, a control panel and accumulator (to meet small demands), all packaged with valves to provide water throughout the system. Controlled either by Pressure, Flow or Float Switch sensing, the pumps automatically run until the demand is fulfilled. Sophisticated controls ensure that operation of the pump is rotated to provide even usage so that in the unlikely event that a pump should fail the standby pump is immediately activated to provide unremitting supply. Additionally, the sets are protected against an interruption of the water supply so that the pumps are not run dry causing expensive damage. A range of alarm conditions provides the user with information regarding the status o both the booster sets and system.Key Features and Benefits :- » Constant pressure can be set via the PLC Controller to ensure maximum comfort. » Optimum Energy saving and Minimum Water Wastage. » Different timings of operation can be set using the timer function. » Auto-change over after set timings of individual pump. » Digital indication of number of pumps running at a time,power consumed by pump,voltage taken pump,number of working hours of each pump. » Highly efficient energy savings pumps. » Low operating and maintenance cost.Benefits :- » Power saving by reducing pump’s running time. » Eliminate Bulky Over Head Tank. » Constant Water Pressure at all distribution points. » Multi-pump operation maintains supply, even in the event of pump failure. » Dry-running protection facility and built-in time relays for ensuring constant and steady operation.
...more
Domestic Ro Plant
Pure Sip RO SERIES - LIFE STYLE ( RO+UV+TDS Controller + PE System + Water Suppliment) • 8 Stage Purification.• RO Water Out Put : 10- 15 Ltrs / Hr.• Rejection of TDS # : 90 % approx.• Electric Supply : 220 V , 50 Hz AC• Storage Tank : 9 Ltrs (Normal)
...more
Demineralizationb PLANT
Demineralization, also known as Deionization, is the process of removing dissolved minerals from water to make it suitable for industrial or municipal uses. For many laboratory and industrial applications, high-purity water, which is essentially free from ionic contaminants, is required.The two most common types of Deionization are :-1) Two-bed deionization2) Mixed-bed deionization Two-bed Deionization :-The two-bed deionizer consists of two vessels - one containing a cation-exchange resin in the hydrogen (H+) form and the other containing an anion resin in the hydroxyl (OH-) form. Water flows through the cation column, whereupon all the cations are exchanged for hydrogen ions.To keep the water electrically balanced, for every monovalent cation, e.g. Na+, one hydrogen ion is exchanged and for every divalent cation, e.g. Ca2+, or Mg2+, two hydrogen ions are exchanged. The same principle applies when considering anion-exchange.The desalinized water then flows through the anion column. This time, all the negatively charged ions are exchanged for hydroxide ions which then combine with the hydrogen ions to form water (H2O).Mixed-bed Deionization :-In mixed-bed deionizers the cation exchange and anion-exchange resins are intimately mixed and contained in a single pressure vessel. The thorough mixture of cation-exchangers and anion-exchangers in a single column makes a mixed-bed deionizer equivalent to a lengthy series of two-bed plants. As a result, the water quality obtained from a mixed-bed deionizer is appreciably higher than that produced by a two-bed plant.The vessel can be in the form of a large stainless steel or reinforced fiberglass column containing many hundreds of liters of resin, or a small disposable/redeemable cartridge which, when exhausted, can either be thrown away or sent back to the original supplier for regeneration.Demineralization :-Demineralization, also known as Deionization, is the process of removing dissolved minerals from water to make it suitable for industrial or municipal uses. Deionization units also remove all other positive metallic ions in the process and replace them with hydrogen ions instead of sodium ions.As the metallic ions in the water affix themselves to the exchange material, the latter releases its hydrogen ions on a chemically equivalent basis. A sodium ion (Na+) displaces one hydrogen ion (H+) from the exchanger; a calcium ion (Ca++) displaces two hydrogen ions; a ferric ion (Fe+++) displaces three hydrogen ions, etc. (Recall that home softeners also release two sodium ions for every calcium or magnesium ion they attract.) This exchange of the hydrogen ions for metallic ions on an equivalent basis is chemical necessity that permits the exchange material to maintain a balance of electrical charges. Now because of the relatively high concentration of hydrogen ions, the solution is very acid.At this point the Deionization process is just half complete. While the positive metallic ions have been removed, the water now contains positive hydrogen ions, and the anions originally in the raw water.The partially treated water now flows through a second unit; this time an anion exchange material normally consists of replaceable hydroxyl anions and fixed irreplaceable cations.Now the negative ions in solution (the anions) are absorbed into the anion exchange material. Released in their place are hydroxyl anions. All that emerges from such a two-unit system is ion-free water. It still contains the positive hydrogen ions released in the initial exchange plus the negative hydroxyl ions released in the second exchange.What has become of these two ions? Through the magic of chemistry they have combined (positive to negative) to produce water molecules, which are in no way different from the water in which they were produced.The result of this two-stage ion exchange process is water that is mineral-free. Deionized water has a wide range of uses in industry. Chemical production, pharmaceuticals, electroplating, television tube production, consumer products such as liquid detergents & leather goods processing are among the many diversified applications for Deionized water. The quality of water flowing out of a primary system, whatever its composition is determined by the ion leakage from the Cation exchanger. This ion leakage varies, depending upon the properties of the raw water and the rate of regeneration. The quality of the demineralized water obtained is not sufficient for certain uses such as that of feed water for very high-pressure boilers and various applications in the chemical, nuclear or electronics industries. Therefore, it has to be further treated in a system known as a polishing plant.Two-bed and Mixed-Bed Demineralization :-Resin-based demineralization systems are typically designed in two-bed or mixed-bed configurations. Two-bed deionizers have separate tanks of cation and anion resins. In mixed-bed deionizers, the anion and cation resins are blended into a single tank or vessel. Generally, mixed-bed systems will produce higher quality water with a lower total capacity than two-bed systems. They are often used as post treatment for a reverse osmosis (RO) or electro Deionization (EDI) system as a final polishing step. Many industrial high purity water systems that do not incorporate membrane treatment use a three-step process consisting of a cation exchange step, an anion exchange step, and a mixed bed step for polishing the water to high purity.Usually a mixed bed-polishing unit contains strong acid Cation (SAC) resin and strong base Anion (SBA) resins combined to a ratio of approximately 40% Cation resin to 60% Anion resin. (All resin volumes are dependant upon the incoming water analysis and the required quantity of treated water).Please note: The Cation resin must be a strong acid Cation type (SAC) and the Anion resin must be a strong base Anion resin (SBA).After a service cycle, each resin is regenerated as listed :-(SAC): Strong Acid Cation resin is washed with approx. 30% hydrochloric acid.(SBA): Strong Base Anion is washed with approx. 26% caustic. Advantages :- » The water obtained is of very high purity and its quality remains constant throughout the cycle. » The pH is almost neutral. » Rinse water requirements are very low.Applications :- » Battery top up » Laboratory and research institutions » Pharmaceuticals » Chemicals » Electroplating and mirror silvering
...more
Bunglow Industrial Water Softening Plant
Dimension 10 inch to 60 inch• Can be attached with water gusher• Idial for Flats• Softened water protects households appliances & sanitary fitting making them look new always.• Gives your clothes, skin and hair a soft feel.• Save your solar system, water heaters, washing machines from getting corrosion
...more
Booster Pump
We are considered as reliable manufacturer and supplier of a wide range of booster pump in India.
...more
Electro Chlorinator
we hold expertise in manufacturing and supplying of electro chlorinator, that are available with us in excellent designs.
...more
Gas Geyser
we are a prominent organization engaged in manufacturing and supplying a stylish range of Gas Geyser in India. We have electrical and gas geyser both. The electrical geyser use electricity. Shapes like square according to the space are customized. They come with specifications sheets. The sheets contain all necessary information about geyser. Sheets are square in shape.
...more
Iron Removal Plant
We hold expertise in manufacturing and supplying of iron removal plant, that are available with us in excellent colours and designs.
...more
Reverse Osmosis Plants
Pure Sip Series of Reverse Osmosis are field proven, highly reliable and cost effective answer to treat a wide range of brackish waters. Designed with flexibility, the series utilize state-of-the-art spiral wound reverse osmosis membranes to suit a given application. These systems can remove 90%-95% of total dissolved salts.
...more
Sewage Treatment Plant
Our company is counted amongst the foremost manufacturers & exporters, wholesalers and suppliers of Sewage Treatment Plant in India.
...more
Ultra Filtration System
We take the liberty of introducing ourselves as one of the leading manufacturers and supplier of ultra filtration system in India.
...more
ultra purification system
We take the liberty of introducing ourselves as one of the leading manufacturers and supplier of ultra purification system in India.
...more
Water Coolers
we are a prominent organization engaged in manufacturing and supplying a stylish range of water cooler in India.
...more
Water Softening Plant
Industrial Upflow Softeners are manually operated and designed to suite the requirements of medium scale industries. They incorporate the prove technique of counter flow regeneration. The unit thus produce treated water with low residual hardness throughout the cycle.
...more
Water Treatment Plants
we are a prominent organization engaged in manufacturing and supplying a stylish range of water treatment plants in India.
...more
Sand Filters
The sand filter is used for the simple filtration from water of visible dirt or suspended matter (turbidity) due to silt, sand, organic matter, and rust type particles. These units use sand or gravel as the filter media, and are effective in removing sediment and cloudiness from water, except when such turbidity is due to extremely fine particles. Sand filters must be backwashed periodically to clean the suspended matter from the filter media and flush it down the drain.
...more
Activated Carbon Filters
Activated carbon filters are primarily used to remove objectionable tastes and odors from water, and are effective in removing chlorine. These filters contain activated carbon, a form of charcoal with high adsorptive qualities. Adsorption is defined as the adhesion of a gas, vapor, or dissolved material on the surface of a solid. As water is brought into contact with these activated carbon particles, the taste and odor constituents are retained in the carbon, resulting in a taste and odor free water.
...more
Demineralization Plants
Demineralization, also known as Deionization, is the process of removing dissolved minerals from water to make it suitable for industrial or municipal uses. For many laboratory and industrial applications, high-purity water, which is essentially free from ionic contaminants.
...more
Pressure Boosting Set
A Pressure Boosting Set primarily consists of pumps, a control panel and accumulator (to meet small demands), all packaged with valves to provide water throughout the system. Controlled either by Pressure, Flow or Float Switch sensing, the pumps automatically run until the demand is fulfilled. Sophisticated controls ensure that operation of the pump is rotated to provide even usage so that in the unlikely event that a pump should fail the standby pump is immediately activated to provide unremitting supply.
...more
NEUTRALIZING FILTERS
To increase the pH value of a water, which is to decrease the acidity and thus its corrosive nature, a neutralizing filter is recommended. The presence of large amounts of free carbon dioxide gas in solution (carbonic acid) renders a water acid in character, which can cause corrosion damage to the metal components of a water system, including the water pump, piping (iron, galvanized brass, and even copper), tank, water heater, and fixtures. Neutralizing filters contain a bed of materials such as calcite and magnesia.
...more
Effluent Treatment Plant
Our company is counted amongst the foremost manufacturers & exporters, wholesalers and suppliers of effluent treatment plant in India.
...more
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Pure Sip Private Limited
