Shearing Machine Dealers in Odhav, Ahmedabad (65 products available)

We manufacture and supply over crank Shearing Machines, which are designed and manufactured using structural analysis technique for high performance, constant and large-scale production, accuracy and durability. These machines fabricated by us are rigid, interconnected in design with strongly welded structure of MS plates and other parts to take a full load with least aberrance. It is equipped with a firm clutch mechanism so that strokes for production can be given. Over Crank Shearing Machines have four edges rectangular high quality high carbon high chromium (HCHC) knives for longer durability. Gunmetal bushes are available in all running parts. A strong mechanical back gauge and hand operated single shot lubrication system is also available in all the shearing machines as standard equipment.

HVR Hydraulic Shears machine : 2mm to 25 mm

length : 1000mm to 6300 mm

Owing to the trustworthy logistics facilities, we are instrumental in offering the bulk requirements of the customers and that too in the set time span. The finest array of products we deliver is manufactured using only exceptional quality inputs (raw material). We make certain that the material (inputs) used are of high grade.

Hydraulic shearing machine 4mm hvr 6 mm cutting 3000mm length.

Foot operated shearing Treadle shearing machine is designed and developed for accurate BURR-FREE cutting of thin or thick sheet in minimum strength, it helps to get more production in minimum time, two best quality of spring provided for quick return of ram (Upper Beam), fitted with side, back, front gauges and table extension.

Automatic Grade : Automatic

Control Type : Hydraulic

Shearing Material : Mild Steel

Shearing Thickness : 4-5 mm

Shearing Width : 300 mm to 1200mm

Body Material : Mild Steel

NC shearing machine has all the advantages of hydraulic shearing machine. The NC controller adds some more special advantage to machine. The fast and accurate multi position back gauge system is very efficient and accurate. The machine productivity and accuracy are much improved with NC controlled back gauge. Range: 3 mm to 25 mm | Length: 1250 mm to 7000 mm

size : 10,4’

CNC shearing machine Swing beam hydraulic shear. Heavy duty, rigid all welded steel frame. Material Hold-down pressure adjustment proportionally to cutting pressure. Colour Touch Screen 10,4’’. Programmed cutting length. More hold downs near the squaring arm for better holding & cutting of small parts. Automatic programmable high speed CNC back gauge with AC servomotor. Precise Illumination of the cutting line. Front guard with 1 swivelling part and safety switch. Rear fence equipped with photoelectric guards. 2 X front sheet supports 1m each with linear scale.

This Hydraulic Angle Cutting Machine is mainly used for cutting angle process of angle steel, in the iron tower of the power transmissions and communications. Hydraulic Angle Cutting Machines are acknowledged for their optimum performance, reliability, low maintenance cost and longer functional life.

Voltage : 440 Volt

Usage/Application : Textile Industries

Max Shear Thickness : 2-10 mm

Capacity : 3-20 Ton Per Day

Max Shear Width : 500-1000 mm

Frequency : 50Hz

Operation Mode : Semi-Automatic

Cutting Material : Stainless Steel

Country of Origin : Made in India

Automatic Grade : Automatic, Semi-Automatic

Voltage : 380 V

I Deal In : New Only

Size : All Size

We are Supplier of all type of shaping machine which made by sate of art technology. all equipment is manufactured on precision machinery by our vendor.

Features : Low power consumption, Easy to maintain, Long service life.

Our valuable clients can avail from us a premium quality range of Shearing Machine which is high on demand in the market. The offered machine is manufactured using superior quality components and modern techniques by our deft professionals. Provided machine is available in numerous technical specifications as per the variegated requirements of our esteemed clients. Our provided machine is generally used in cutting/shearing circles, segments, strips of unlimited length and ring shearing. This machine is highly appreciated by our clients for its excellent performance and smooth operations. We feel proud to introduce ourselves as the leading manufacturer and supplier of Shearing Machine. To manufacture Shearing Machine, we use quality raw material with the help of cutting edge technology under the guidance of experienced professionals. FEATURES Sturdy construction Higher efficiency Longer service life Less maintenance

Established in the year 1987, at Ahmedabad (Gujarat), “Anil Industries,” are a leading manufacturer and exporter of Steel Rolling Mill Plants and its allied Machinery. Our range includes Hot & Cold Steel Rolling Mill such as Structure & Bar Rolling Mill, Fully Automatic, Semi Automatic and Manual from 6” to 30” capacity. We have a sophisticated manufacturing unit that is equipped with Lathe machine, Planno miller, Hobbing machine, Flow Boring, Boring Machine, Mig wellding and hydraulic power press etc. ensure smooth production process. To ensure delivery of quality products to our clients, we have also appointed a team of quality controllers who stringently check the products at various stages of production. Backed by a dexterous team, we are also able to meet the variegated demands of our clients in a stipulated time frame. We have been guided by our mentor, Mr. J.P. Singh, who has enabled us to carve a niche for ourselves in the market. His vision and sharp business Knowledge has helped us to be a market leader in the country as well in the world.

We have in store for our clients a wide range of Mechanical Under Crank Shearing Machines. The high-grade raw material is sourced from the authentic vendors of the market to manufacture these machines in compliance with the set industry standards. The Mechanical Under Crank Shearing Machines are offered in various technical specifications to meet the variegated demands of our customers.

Country of Origin : India

Automatic Grade : Semi Automatic

Voltage : 440V

Weight : 50000

Hydrulic Sheraing Machine NC backGauge 

Frequency : 50/60 Hz

Material : Steel

Surface : Polished

Operation Mode : Automatic

Surface Finish : Color Coated

Control Panel : Electric

Main Drive : Motor

Country of Origin : Made in India

Automatic Grade : Semi-Automatic

I Deal In : New Only

Material : Mild Steel

Weight : 1000-2000kg

Voltage : 220V

Rated Power : 1-3kw

Automatic Grade : Automatic

Driven Type : Elecric

Frequency : 50 Hz

Condition : New

Automatic Grade : Semi Automatic

Driven Type : Hydraulic

Warranty : 1year

Country of Origin : India

Brand Name : Shivam technomech

After-Sales Service Provided : Yes

We are manufacturer of hydraulic press brake machine and shearing machine all models are available like manual hydraulic press brake, nc press brake, cnc press brake, hydraulic shearing machine, nc hydraulic shearing machine.

Standard Feature Accessories:   • Main drive standard make motor • Electrical control panel with three speed inch,single cycle,Auto mode of operation. • Two front sheet supports • Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains. • fine stroke adjustment rod with limit switches. • One suitable 5 way die and blade. • (segmented ofr full length,EN-9 not covered under warranty) • moveble console with emergency stop. • Tonnage indicating - adjustment device. • Manual centralized lubrication system with hand pump. • bending chart. Feature: • Mono Block Welded Steel Frame ultra tested-2062 • steel plates rigid to provide Accurate bending. • All pivots have hardened of ground pin bushes of five • piece guide slide lubricated by central hand pump • Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics. • Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum. • Three cycles operation inch,Single cycle&Auto for grater operator convenience. • Three speed operation reduces ideal travel time which improves productivity. • Bending force easily adjustable From front for forgue tool of bending material.

Akruti bar shearing machine is robustly built to with stand the stress while shearing of rebar and various forms steel bars.

We provide the clients with Over Crank Mechanical Shearing Machine that is available in different specifications to meet the demands of the clients. These Mechanical Shearing Machines are duly checked at each level of production process in order to deliver a flawless range. FeaturesPerform efficientHeavy dutyHustle free workingUser friendly operationApplicationsEngineeringWood working,AutomobileElectricalFood processingElectronicConstruction plasticPrinting ModelCapBladeBladeStroke perHold downMachineMotorWidthThicknessMinuteKnife edgeL x W x HTOS – 11270 x 6183030452350 x 2150 x 26007.5TOS – 21525 x 6183030462575 x 2150 x 260010TOS – 32030 x 6223025473100 x 2200 x 270010TOS – 42540 x 6223025483500 x 2200 x 270012TOS – 53125 x 6223025494250 x 2200 x 270015TOS – 61525 x 8223025502800 x 2000 x 250012.5TOS – 72030 x 8223025513150 x  2150 x 260012.5TOS – 82540 x 8223025523600 x 2200 x 265015TOS – 93125 x 8223025534350 x 2250 x 270020TOS – 102030 x 10253025543225 x 2250 x 270015TOS – 112540 x 10253020553650 x 2450 x 275020TOS – 123125 x 10253020564300 x 2550 x 280025TOS – 132030 x 13283025573350 x 2500 x 280020TOS – 142540 x 13283020583600 x 2700 x 290025TOS – 153125 x 13283020594400 x 2800 x 300030

We Are Occupied In Manufacturing Superior Quality Of Hydraulic Shearing Machine In Various Shapes & Sizes. Hydraulic Sheet Metal Shearing Machine Is Made-Up From High-Grade Components That Assure High Strength And Toughness To The Structure. Moreover, We Provide Hydraulic Shearing Machine At The Most Reasonable Price In The Industry. FEATURES : Mono Block Welded Steel Easy to use and convenient to operate Electronically adjustable rake angles Rapid cutting facility Adjustable cutting clamp Activation from console and movable foot cut switch Sheet clamped hydraulically before cut starts Stroke length – position can be set for short jobs Beam returns on releasing foot switch for smaller cuts OTHER DETAILS : Item Code : HVR-345 DESIGN FEATURES : Mono Block Welded Steel rigid to deflection tensile movement of high tensile. Ease of accurate gap adjustment of blades for bur-free cuts. Polymide surfaced Hydraulic Hold down cylinders to prevent sliding of the plates during cutting operation. Motorized back gauge with electronic digital readout. Electronically adjustment RAKE ANGLE as per material of thickness for twist free cuts. Synchronized Beam guided system for constant gap between blades. Extra capacity to cut Hard-thicker plate than nominal capacity. Blades produced from High Alloying Steel with functional four sides. Adjustable Cutting & Clamping force for quality cutting & power saving. Rapid cutting of short pieces by electrical stroke adjustment system. STANDARD FEATURES & ACCESSORIES Moving beam Synchronized by differential cylinders. Hardened rollers guide beam for constant blade gap. Blade gap easily adjustable by calibrated levers. Rake angle adjustable to suit thickness and material. Activation from consol and movable foot switch. Sheet clamped Hydraulically before cut starts. Stroke length - position can be set for short jobs. Beam returns on releasing foot switch for smaller cuts. Cutting area illuminated for clear view of ends. First two hold downs spaced closer at both ends. Squaring arm 1000mm at left with hardened liners. Squaring arm 600mm at right helps distribute wear. Front gauging by stopper-scale on squaring arm. Hardened rods on table for safe easier feeding. Two front supports for supporting longer plates. Front operated motorized back gauge with NC type DRO 1000 mm Compact, Low maintenance of silent Hydraulic system. Digital stroke - counter. HVR 315, HVR 320, HVR 325, HVR 330 have sheet supports, manual backgauge & left squaring arm of 600mm length. OPTIONAL ACCESSORIES Automatic contact shearing. Hydraulic rear sheet support. NC backgauge with ballscrew.

Swing beam hydraulic shear Heavy duty, rigid all welded steel frame Material Hold-down pressure adjustment proportionally to cutting pressure Colour Touch Screen 10,4’’. Programmed cutting length. More hold downs near the squaring arm for better holding & cutting of small parts Automatic programmable high speed CNC back gauge with AC servomotor Precise Illumination of the cutting line Special cutting blades made for steel and stainless steel (German origin) Ball casters on the table

Automatic Grade : Automatic, Semi-Automatic

Country of Origin : Made in India

Features : Sturdy construction , Excellent performance, Foot Switch with emergency button can stop machine immediately when accident happen.

Item Code : HVR325

Material : Mild Steel

Model Name/Number : HVR 325

No Of Hold Downs : 13

Back Gauge Range : 600 to 1000mm

Machine Type : Shearing machine

Machine Capacity : 0.5 mm to 25 mm

Blade Length In Mm : 2550mm

Layout : Horizontal

Phase : 3 Phase

Control type : CNC

Application Time : 0-99 min

Power Consumption : 36 W

Contraction Time : 1 to 10 sec

Power Supply : 230 VAC, 50-60 Hz

Bhavya Machine Tools supplies hydraulic shearing machine. They are extensively used for cutting large sheets, bars and plates of metallic and non-metallic materials into various shapes. Our instruments are manufactured for smooth and precise cutting. We offer compact, safe and durable tools. The chief features include better stability, low noise and higher output.

Bhavik treadle shear machines are specially designed for quick and incessant cutting of steel sheet of varied widths and trimming them in unlimited length, they come with some vital features and comprise high tensile springs for quick return of treadle, spring loaded sheet holding device for easy operation and low maintenance.