Testing Equipment Dealers in Paldi, Ahmedabad (77 products available)

• Speed: 0.001mm/min.

Dedicated compression tester for corrugated board boxes, cartons, containers, drums and other packaging materials. Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell protection. Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm, inch and percent. Programmable extension limits.Drive system temperature and current protection. Positional jog speed 0.001mmmin to maximum. Speed setting increments 0.001mmmin.

We are offering Complete range of bitumen testing instruments as per following Marshall stability test apparatus Automatic marshall compactor Rolling thin film oven Rotational viscometer Skid resistance tester Ductility testing machine (Without refrigeration) Ductility testing machine with Refrigeration System Fully automatic penetrometer Low temperature waterbath Core drilling machine Mastic Asphalt Hardness Tester Flameproof bitumen extractor Planetary Mixer Petroleum distillation apparatus Distilllation apparatus as Muffle furnace Hot air oven - CE Marked Loss on heating test oven Softening point apparatus Saybolt viscometer Cleaveland flash and fire point apparatus Pensky marten flash point apparatus Benkleman Beam apparatus Density of semi solid bituminous material Marshall Rammer Ductility moulds Camber board Pycnometer bottle Aspirator pumps

• Max weight of specimen: 4500 gms
• Commendatory weight of specimen: 1000-1500 gms
• Capacity of balance: 10 kg
• Precision of balance: 0.1 gms
• Chamber dimensions: 350 x 440 x 350 mm (W x H x D)
• Max working temp of chamber: 800 °C
• Standard working temp: 538 °C with tern compensating
• Testing Time: 75-85 minutes
• Power supply: AC 220 V ± 10%, 50 Hz
• Current draw: 32 amps max

• Temperature display: LED
• Temperature range: 5 degreeC above ambient to 200 degreeC
• RPM Indication: Digital indication on RPM indicator
• Operates: 230 Volt, 50 Hz, Single Phase, AC Supply
• RPM Control: Controlled by accurate DC Drive
• Features: Aesthetic outer appearance,Unique and self explanatory design,Designed by keeping in mind easy cleaning and maintenance purpose

This procedure is used for measuring the tear strength of the thermoplastic films or non-rigid sheet. By this test method, we determine the average force to propgate tearing through a specified length of plastic film or non-rigid sheeting. This test method is of value in ranking relative tearing resistance of various plastic film and this sheeting of comparable thickness.

• Speed :: 25 RPM Max.
• Timer: 1 to 999 sec.
• Accuracy :: 1 RPM

Friability Tester is specially to determine the durability of tablets from the time of production to the time use, as its is important to test abrasion and impact hardness of the tablets. The apparatus consist of transparent acrylic drums. The drums are equipped with a plastic blade which carries the tablets along with it up to predetermined height while the drums are rotating and tablets are allowed to slide and let them slide down. The tablets are weight before and after the rubbing in the drum have taken place. The Difference in weight indicates the rate of abrasion.

• Material: Stainless Steel
• Country of Origin: Made in India
• Specialities: Easy to use, Portable, Unmatched quality

• I Deal In: New Only 
• Material: Stainless Steel
• Color: Blue
• Supply: AC
• Type Of Testing Machines: Eddy Current Dynamometer
• Packaging Type: Box
• Display Type: Analog
• Usage/Application: Industrial  

• Color: Black
• Battery indicator: Digital
• Size: Standard
• Shape: Round
• Application/used: Automobile

To apply Screw measure cap on PlasticGlass capped bottles with the specified torque Cap diameter:- 20 mm to 50mm Cap Height :- 12 mm to 30mm Bottle diameter:- 30mm to 80mm Bottle Height:- 30mm to 150mm

FEATURES   => State of Art Microcontroller Based Design.=> 7 Digit Stepper motor counter=> CT Ratio Site Programmable trough DIP switch=> True RMS measurement.=> Reverse indication for wrong wiring polarity=> Direct Reading No multiplication factor    

bitumen testing equipment, aggregate testing equipment, Cube Mould

California Bearing Ratio Test Apparatus, Field Type (AIM 155)   This apparatus, mounted on a rolled steel joist cantilevered from the back of the truck or fitted to the underside of a mobile frame, can be used to determine the bearing ratio (generally known as the California Bearing ratio) of soils quickly and efficiently for the evaluation of strengths of sub-grade & bases for roads & runway pavements.This method of testing in-situ, using piston penetration, is useful for determining the load carrying capacity in the field, when the in-place density and water contents are such that the degree of saturation is 80% or greater, when the material is coarse grained and cohesionless so that it is not affected by changes in the water content when the material has been in-place.      

This Instrument is in according to ASTM D 1525 for VSP 648 for HDT BS, DIN, ISO, ISI (Indian Standard) or according to customer’s required specification Temperature gradient corresponding 50°c/hr, 120°c/hr or free programmable Start temperature free programmable Displacement measuring by vibration free Digital dial gauges accuracy of ±0.01mm At the same time user conduct test of VSP or HDT Sample thickness 2-12 mm With high power cooling system. Re-cooling time from 200°c to ambient temperature in approx 30-45minutes With help of cooling facility user can start new test immediately Bath construction made by inside SS and outside MS with insulation Stirring facility is used for uniform temperature

NTPL is devoted towards providing superior quality products that are customized according to the specific requirements of clients. With the introduction of ISO system, occurrences of defects in production are prevented and as a result TQM standards are followed. This also enables quality improvement at controlled costs of production that in turn facilitates competitive pricing. Quality of our products and production process is our primary concern, which has been the driving force behind our rapid growth. We conduct numerous quality checking procedures and audits right from material acquisition to packing. It is our endeavour to create a culture of Total Quality where continuous improvement of our people, our processes and our products become a way of life. With our "Vardhman-BROCKHAUS Magnetic Material Testing Laboratory" we assure quality with commitment. Navkar Transcore has already applied for NABL Approval which will be one of its kinds in Transformer Lamination Industry. Click to zoom... Navkar Transcore Magnetic Material Testing Laboratory Single Sheet Tester Ring Core Tester Epstein Tester Franklin Insulation Resistance Testing Machine Various measures are being taken to ensure the quality of incoming and outgoing materials till up to finished lamination or core and their packaging. It is also assured that all the measuring instruments used for quality checks are approved by the Govt. recognized Agency to ensure accuracy and exactness. In addition to our quality material supply, the Cut to length line installed at our plant also provides the added benefits of precise core cutting, core losses as well as reduction of noise level up to 15%

Features: 3 1/2 digits LCD display Heavy duty shock and drop proof. Overload protection up to 415 V AC on all ranges Unique basic accuracy of 0.25% on DC Voltage Transient protection of 2KV Ranges: DCV : 200mV to 1000V ACV : 200mV to 1000V Resistance : 200 OHM to 20M OHM ACA / DCA : 200mA to 10A Diode and continuity check. Optimal Probe 40KV AC / DC

A perfect organization always make sure for the all the product to be manufactured under all the possible atomization which in result can give the perfect shape as the requirement or the need of the market. Following the same rule since more then 5 decades we are trusted manufacturer and supplier of “MARSHAL STABILITY TESTING APPARATUS” to the industry. Having a wast workshops equipped with all the necessary machinery our team used the raw material which are high grade in quality. They also follow all the parameters and norms set by the industry. Our Marshal Stability Testing Machine is used in evaluation & designing paving mass of Bituminous. We provide 2 different type of machine. “Marshal Stability Test Apparatus” & “Modified Marshal Stability Test Apparatus”.

• Power Source: Battery
• Weight: 34 G
• Operating Temperature: -20 to +70 DegreeC
• Dimension: 60 x 38 x 18.5 mm

• Display Type: Digital
• Material: SS
• Grade: Manual, Semi-Automatic
• Voltage (V): 220
• Accuracy (%): +-1 mm

We are the leading exporters and supplier of this products.