Milling Machine Dealers in Mehta Road, Amritsar (32 products available)

Maximum diameter Dia 1500 mm Effective width 1400mm - 25mm Pneumatic brake control of web tension. Taper centre, stretch centre is optional. Hydraulic control of the lifting and lowering, clamping, releasing, right­ left movement.

• Application: ROAD CONSTRUCTION

• Usage: Automotive Industry
• Material: Stainless Steel
• Packaging Type: Metal Sheet Box
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Grinding Length: 50-100mm
• Specialities: Excellent Functionality, Less Maintenance
• Type: Surface Grinding

Special Features Most suitable for grinding knives and blades of paper cutting machines, plastic cutting machines, metal cutting shears, etc. Electro-Magnetic 360o Swiveling Table for flat, bevel and multi surface grinding.   Machines Constructions Machine Bed Wedled, modular construction principle. Smooth inner area for good cooling water drainage & easy cleaning.   Guideways Hardened and ground steel bands for main and side guides, easily exchangeable.   Electro Magnetic Table Fixed for flat grinding with total table coverage, in Electro-Magnetic Design. Electro-Magnetic swivelling table for flat, bevel and multi surface grinding in one setting up operation, swivelling 360, multiple bearing points with large diameter journals for maximum rigidity additional clamping sides with ‘T’ slots & clamps. Electro Magnetic Table locking, by hand.   Grinding Head Carriage Heavy Casting mounting on four reels with eight New-Departure dust proof ball bearings which act as rollers. Four reels guide the carriage in the carriage ways of the bed. The sliding base, mounted on the top of the carriage, is adjustable to feed the grinding segmental or cup-wheel to the knife. The motor base can be swiveled 10 to 25 degrees, so that the knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.   Down-Feed for Grinding Tool Multiple spindle system for play and weight equalisation. Automatic Down-Feed also available.    Grinding Motors SIEMENS OR NGEF Brand.   Grinding Head Cylindrical type bonded to flange for light grinders, segmental heads for heavy grinding machines. For quick re-setting or changing of the segments, an easily accessible changing station is situated at the rear of the machine. To ensure vibration – free running, all grinding wheel flanges and segmental heads are fitted with adjustable balancing  weights. For obtaining maximum segment use, patented segment savers can be used.   Cooling System Water tank attached with the machine. Cooling fluid application by the electro-coolant pump.   Electrical Unit All electrical controls are housed in the master panel board.

• Effective width: 1400mm – 25mm

Hydraulic control of the lifting and lowering, clamping, releasing, right-left movement.Pneumatic brake control of web tension. Taper centre, stretch centre is optional.

• Material: Mild Steel
• Country of Origin: Made in India
• Work speed: 150m/min
• Working width: 1400-2200mm
• Maximum splicing length: 2500-4000mm
• Maximum stacker height: 1700mm
• Operating direction: Left or right

We provide high quality Milling Machines in various sizes and specifications. These Milling Machines are stringently checked on various technical parameters. We are regarded among the prominent Manufacturers, Exporters & Suppliers of Milling Machines. The company offers Milling Machines at pocket-friendly prices. Testing Parameters : Input powerLinear speedOperating range Used In : BoringSlottingCircular milling dividing Drilling worksCutting :KeywaysRacksGearsFluting :TapsReamers

• Brand Name: POLYMASTER
• Material: Mild Steel
• Color: WHITE/YELLOW/BLUE PAINTED
• Voltage: 380V
• Driven Type: Electric
• Country of Origin: India
• Usage: Automotive Industry
• Type: Blade Grinding
• Certification: ISO 9001: 2015
• Condition: New
• Finishing: Polished
• Machine Weight: 3000-10000-Kg
• Power: 5-20Kw
• Packaging Type: Wooden Box
• Phase: Three Phase
• Warranty: 1 Year
• Corrosion Resistance: No
• Machine Structure: Vertical
• Operating Type: Automatic
• Grinding Diameter: 10-20 Mm, 150mm To 300mm
• Grinding Length: 1550-5000mm
• Specialities: Excellent Functionality, Less Maintenance, Durable, Easy To Use
• Dimension (LxWxH): Depends On Model
• Grinding Wheel Size: 150x80x25mjm
• After-Sales Service Provided: YES

Rotary Milling Table, Horizontal Type Wire Drawing Machine, Bench Vice

We Are Manufacturers Of CNC Rotary Tables used for jobs which require high precession Indexing vanishing Manpower & Errors During Working. Our rotary table is capable of up to 999 Divisions & Degrees. Available in Different Sizes & Models.

1.Equipped with four arms, support two sets of mill roll paper, non-stopping in changing the roll paper. 2.Hydraulic drive to lifting & lowering, clapping and correcting. 3.The paper tension is controlled by pneumatic disk brake and multi-points pneumatic brake. 4.Adopt expandable chuck to improve efficiency. 4.Maximum load-weight: 3T 1, Reel Stand driven by hydraulic 2, Kraft paper range Width:  Max:1900mm     Min:900mm Diameter: Max: 1400mm     Min:  350mm 3, Max load-bearing: 4000kg (One side) 4, Main roller dia.:  219mm 5, Pneumatic Source Pressure(Mpa): 0.4---0.8Mpa 6, Power: 380V 50Hz  Spec of hydraulic system: 1, Working Pressure(Mpa):16---18Mpa 2, Hydraulic Cylinder Range(Lift/Down): 100×440mm 3, Hydraulic Cylinder Range(Clamp/Loosen):  63×700mm 4, Hydraulic Station Motor Power: 4KW     Short Time(S2) Working Type Nominal voltage:380V 50Hz 5, Hydraulic Station Electromagnetic Valve Working Power:  220V     50 Hz  

We offer surface grinder machine with autofeed.

We are the Manufacturer and Supplier of Steel Rolling Mill Parts. Our range of Products includes Bearing chocks, Fiber chocks, Spindles, couplings, Universal couplings, Geared couplings, Universal spindles, Wobblers type spindles, Chain sprockets, Gears of any types and sizes, Helical gears, double helical, bevel, Worm and worm wheels, Tilting tables and roller tables, Conveyors, H. C. H. Cr. Guide rollers for entry guide boxes, All parts of Comcast machinery; Such as dummy bar, apron rolls, mould assembly and its parts. The Steel Rolling Mill Parts we provide are available in different sizes and dimensions. Our Steel Rolling Mill Parts are manufactured according to client̢۪s drawings and item dimensions. We provide premium quality of Steel Rolling Mill Parts. The Steel Rolling Mill Parts are easy to install, are corrosion resistant and have low maintenance. Highlights Superior qualityCustomization of our productsAvailable in different sizes and dimensionsEasy to install

• Certification: CE Certified
• Specialities: Grinding
• Machine Weight: 100-200kg
• Voltage: 110V
• Operating Type: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

• Capacity: 10 TPH
• Material: Cast Iron
• I Deal In: New Only
• Country of Origin: Made in India
• Color: Grey
• Frequency: 50 Hz
• Power: 20 HP MOTOR
• Automation Grade: Automatic

We are offering wide range of Head Surface Grinder to our valued clients that is ideal for engine re builders. Moreover, our range of machines is capable of grinding and milling of cylinder blocks and is made of cast iron or aluminum alloy. Further, these are available in various specifications, and can also be custom made as per the clients requirements

• Brand Name: Polymaster
• Material: Mild Steel
• Color: White/yellow/blue Painted
• Voltage: 380V
• Machine Weight: 3000-10000-Kg
• Driven Type: Electric
• Country of Origin: India
• Usage: Automotive Industry
• Type: Blade Grinding
• Certification: ISO 9001: 2015
• Finishing: Polished
• Power: 5-20Kw
• Packaging Type: Wooden Box
• Phase: Three Phase
• Warranty: 1 Year
• Corrosion Resistance: No
• Machine Structure: Vertical
• Operating Type: Automatic
• Grinding Diameter: 10-20 Mm, 150mm To 300mm
• Grinding Length: 1550-5000mm
• Specialities: Excellent Functionality, Less Maintenance, Durable, Easy To Use
• Dimension (LxWxH): Depends On Model
• Grinding Wheel Size: 150x80x25mm
• After-sales Service Provided: Yes

The Machine is highly capable of regrinding the blunt edges of knives in a minimum required time so effectively which reduces frequency of further re-grinding and enhances the life of the knife.It is easy to operate by a semi skilled worker. Heavy construction design with suitabily distributed load, traversing effectively, vibration free provides accurate grinding of the knives in various industries viz paper , plywood , plastic, food processing , metal shearing industry etc. Machine is having capacity to grind any type of JOB from 1500mm to 7000mm in single segment.

Rotary Milling Table, Wire Drawing Machine, two way tilt vice, Machine Vice

Road Cleaning Machine, Id Fan, Blower Fan, Industrial Boiler

We are offering header machine. ours double and single stroke solid die and two piece cold heading machines are fully automatic for cold heading screws, bolts, rivets and similar products. The header machines are easy to operate all parts are made of high quality steel and casting and gun metal bushes.