bull block wire drawing machine
Get Price Quote
Weight : 1000-2000kg
Voltage : 220V
Warranty : 2years
Brand Name : Allied
Application : Wire Drawing
Automatic Grade : Automatic
Allied brand Bull Block Single Die System & Double Die System Wire Drawing Machines are best for Drawing. H.B. Copper, Brass and Aluminium Wires. Machines are heavy duty, Durable and Best in performance. Machines are made of Steel Fabricated Frame & Graded Casted Drum to Bear Maximum Load and Long lasting.
high speed wire nail making machine
150,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Condition : New
Warranty : Yes
Voltage : 420 V
Control System : Human Machine Interface
Feature : Simple Control, ECO Friendly, High Efficiency
Surface Treatment : Painted
Computerized : No
Touch Screen : No
Best Deals from Wire Making Machines
Automatic Wire Nail Machine
Get Price Quote
We are a well-known name as Automatic Wire Nail Making Machine Manufacturer, Exporter and Supplier in Punjab (India). The SMT Automatic high-speed Wire Nail Machines are made from high-grade castings and steel. Our Automatic Wire Nail Making Machines are simple and sturdy in design for friendly use. With advanced features, the Wire Nail Machines are known for their long lasting service. Automatic Wire Nail Making Machines can produce nails from H.B. brass, copper and aluminium wires. All the movements except the pressure for gripping and the ejection, are through cranks, which are essential for smooth running at high speeds maintaining full rate production of well finished nails. Special attention has been given to maintain easy approach to all the required adjustments and settings. Our Automatic Wire Nail Making Machines are available at very reasonable prices.
Double Head Wire Stitcher
Get Price Quote
Maximum Gap between Heads : 115 mm (4.5")
Minimum Gap between Heads : 63 mm (2.5")
Heavy Duty Double Head Wire Stitcher Widest range of KMC wire stitchers is available in single & double head model adjustable table, compact design, high production are salient features of these stitchers
Wire Nail Making Machine
155,000 Per Piece
1 Piece (MOQ)
Brand Name : Perfect
Operating Mode : Fully Automatic
Phase : Three Phase
Motor Power : 1.5 HP to 10 HP
Approx Gross Weight : 450 Kg to 2400 Kg
Perfect Automatic Wire Nails Making Machines are simple and sturdy in design are made from high grade casting & steel. These machines can produce flat head nails, pop nails, round head nails, lost head nails, counter shank head nails, from H.B, copper, aluminium & brass Wires. Drive: Its main crank is directly driven by motor and side-shafts are driven by four bevel gears to ensure correct and permanent adjustment of the cutting tool. The length and thickness of the nails is adjustable. All tools are easily accessible and can be quickly changed. its main and side shafts are fitted with browns bushes to ensure long life. All comes, gears, rollers, roller pins are made from high-quality steel properly heat-treated and grounded for long lasting. Working Of the Machine : The wire end from coil passes throughtening rollers and fed intermittently in the gripping dies, which close firmly allowing heading punch to press the head of the nails, then grip loosened and required length of the nail is fed constantly, where it is cut by cutting tools leaving ample stock for the head of the next nail. Thus ready nail is ejected by the ejector. The operations are repeated in each revolution. Note: Due to constant improvement, we reserve the right to change / modify any machine. (S.W.G.)Production (per minute)PNM-1.51/2" X 1.5" (12 to 38 mm)18-14400-450PNM-21/2" X 2" (12 to 50 mm)16-12300-350PNM-33/4" X 3" (20 to 75 mm)14-9225-275PNM-41" X 4" (25 to 100 mm)12-8175-210PNM-51.5" X 5" (35 to 125 mm)10-6110-125PNM-62" X 6" (50 to 150 mm)8-4100-125PNM-82" X 8" (50 to 200 mm)8-290-100
Wire Nail Making Machine
Get Price Quote
1 Set(s) (MOQ)
Type : Automatic
Brand Name : J.J.
After-Sales Service Provided : Yes
Being a foremost organization in this industry, we are actively engaged in offering the finest quality range of nail machine. Features: sturdy design reliable functioning durable finish standards
Wire Stitching Machine
Get Price Quote
Wire Stitching Machines from light to Heavy Duty in power & Treadle operated models suitable for all types of Books, megazines, pamphlets, brouchers, catalogues & Box stitching for small, medium & large scale users are offered by Sikandar Machines. Mainly in box stitching flat wire is used & where the space is less for stitching, straight head stitching is used while where the space for stitching is sufficient angular stitching is best for more gripping of the box made.There are many sizes of Box Stitching Machines as per arm length & various models such as straight stitcher, angular stitcher, bottom stitcher & Flap Stitcher.
ALLIED BRAND BARBED WIRE MAKING MACHINE
Get Price Quote
We are offering allied brand barbed wire making machine. Adjustibility of parts easy maintenance operator has wasy approach in setting all arms, cutters making the machine parts fool-proof it ensures easier dismantling, assembling, loading, unloading as well consequent view over flow of formed wire.
Wire Nail Making Machine
Get Price Quote
We offer high speed Wire Nail Making Machine that is appreciated for flawless performance, easy operation and sturdy construction. Our Wire Nail Making Machine is fully automatic wire feeding unit that carries out clamping of wire through conical rollers, heading operation, point forming and process of finished nails automatically. The technical specifications of our Wire Nail Making Machine vary with chosen model of the machine for wire diameter, length of nail and production. Solid main bed bushes increase the bearing surface and eliminate deformation with fluent lubricating oil film that ensures long life of bushes. The flywheel is mounted on a support independent from the main crank-shaft which therefore is not affected by stresses produced by freewheel itself and by the drive belts. Spiral type bevel gears run in continuous lubricating system and need no maintenance and are noiseless. The round section hammer slide allows correct alignment with the connecting rod, a larger support surface and excellent lubrication. Moreover, an air circulation system cools the slide's running guide and keeps dirt away from the slide itself. The nails ejector is driven by a cam, so there is no contact between the punch and the ejector. The crank shaft and lateral shafts are of high quality steel fully ground and are counter-balanced to extend cutters life. Cutters and grippers are adjusted by means of vertically positioned screws operating on the wedges. The grippers die box is made up of two slides; the stationary gripper is mounted on the former, the sliding one is mounted on the latter that offers large bearing surfaces. Grippers can be removed from the box without taking the box off from the press. This allows shortening the down-times. The wire feeding driven by rollswedge system is self-locking. The clamping pressure on the wire is adjustable, the wire release is pneumatic and the centralized lubrication is partially continuous & partially timer controlled. The oil gets accumulated in a tank located in the machine bed and it is filtered both on suction & in delivery machine and is totally covered which exceptionally reduces the noise level. Wire Nail Making Machine is equipped with 110 v auxiliary controls, a PLC (program logic control) controls the lubrication systems, the wrong wire feeding alarm and operator machine safety devices.
wire nail making machines
Get Price Quote
Owing to rich industry experience, we offer Wire Nail Making Machines to our clients. These machines are manufactured using advanced technology and quality components which are procured from our vendors. The product is manufactured under the supervision of our skilled and experienced workers. These are in accordance to the standards as well as manufactured using supreme quality materials supplied by our vendors.Features: High tensile strength Corrosion-resistance Unmatched performance Other Details:Construction: The main frame is of high grade cast iron and all leavers and other components subject to heavy duty are manufactured from high quality steel and designed with high safety factor. Main Drive: Operating mechanisms are to longer mount on one common shaft but on two auxiliary shafts thus eliminating long cutter leaver The cutter slides move in substantial guides and driven directly by cranks a centric This avoids all detrimental impacts of the cutter against each other consequently reduces cutter wear Crank Shaft: The Crank Shaft is carried in four Bearings. The smooth ruining of the nail machine is thus ensured
Single Head Wire Stitching Machine
Get Price Quote
Capacity (Centre Stitching) (Side-stabbing) Wire Sizes Speed Staple Crown Electrical Load Electrical Supply Floor Area Net Weight Gross Weight : 2 Sheets to 5/8 in. (15.5 mm) 3/4 in.(21 mm) 26 to 20 S.W. Guage 200 Staples per minute 12.5 mm 1/2 HP Motor 220 Volts AC 50 Hz 1 Phase 27 x 24 in. (690 x 610 mm) 150 Kgs. 250 Kgs.
Features: Compact Rotary cam stitching mechanism with silent coil spring single revolution clutch. Neat & effortless formation of crown with the help of simple and efficient clinching mechanism. Simple change over from centre to side stitching mode. East availability & accessibility of spare parts for maintenance and many years of un-interrupted working life of the machine. Safety provisions have been incorporated to protect operator's fingers and other hazards. Finger-guard made from clear perspexallowing maximum visibility.
wire nail making machines
Get Price Quote
wire nail making machines, Automatic Cold Thread Rolling Machine
Wire Nails Making Machine
Get Price Quote
Certification : Ce Certified, Iso 9001:2008
Color : Black, Brown, Grey, Light White
Voltage : 110V, 220V, 380V, 440V
Driven Type : Electric
Type : Wire Nail Making Machine
Weight : 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
Condition : New, Used
Automatic Grade : Automatic, Fully Automatic, Manual, Semi Automatic
Power : 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
Warrenty : 1year, 2years
25/32mm Wire Book Stitching Machine
Get Price Quote
Material : Mild Steel
Power : 1-2 HP
Weight : 150 kg
Automation Grade : Semi-Automatic
Stitching Capacity : 0.1-16 mm
Stitching Speed : 180/Min
Power Operated Wire Book Stitching Machine
Get Price Quote
Type : Book Stitching Machine
Weight : 100-1000kg
Color : Grey
Voltage : 380V
Application : Paper Stitching
Automatic Grade : Automatic
Power : 1-3kw
Warranty : 1year
We make available Power Operated Wire Book Stitching Machine that consumes less power and easy to operate. We are enlisted among the reputed Manufacturers, Exporters and Suppliers of Power Operated Wire Book Stitching Machine. It is manufactured under the supervision of industry experts. Thus, our Power Operated Wire Book Stitching Machine is the perfect option on which buyers can easily rely. One can obtain Wire Book Stitching Machine from us at the best market price.
Wire Nail Making Machine
200,000 Per Piece
Material : MS
Packaging Type : Wooden Box
Brand Name : Saggu Brothers
Power Source : Electric Motor
Wire Ring Making Machine
Get Price Quote
Type : Wire Ring Making Machine
Usage : making round rings, semi circle, full circle
wire rolling machines
Get Price Quote
wire rolling machines, automatic bushes, bangle grooving machines
wire nail machinery
Get Price Quote
wire nail machinery, bolt making machines, Screw Making Machines
Wire Rolling Machine
Get Price Quote
Wire Rolling Machine, die presses, Diamond Cutting Machine, wire machinery