Pressing Machine Dealers in Hadgood, Anand (3 products available)

SCOPE OF USE: Pellet mills working principle is, mash feed is forced outward through holes in a ring die by the action of two or three rollers, which is then cut to a predetermined size. Before mechanical process, steam can be injected into the conditioner at temperature 85 degrees celsius. The result of conditioning and pelleting process,   High qualityAdvantage on stocking and handling of the productHelps animals digestionStrenghten the feed and avoids breakage and loss.Low energy consumptionLow maintenance requirementMinimum loss ratestarch is gelatanized, salmonella risk also is eliminated. Pelleting technology also used in pelleting wheat bran, bagasse, wood, plastics, papers, sewage sludge, chicken manure, classified MSW and chemicals. Die hole sizes usually range from 1.6 mm up to 22 mm.

We offer Hydraulic Press Machine in two basic models. One is economic model and the other one is advanced model. These Automatic Hydraulic Press Machines possess various technically advanced features that distinguish them from each other. We offer hydraulic press machine at very competitive price with that we have carved a niche for ourselves among the pre-eminent Digital Hydraulic Press Machine Manufacturers and Suppliers. ‘MARSHAL’- Hydraulic Press (Economic Model) Pillar type : Capacity 150Kg/cm2 Die size : 200mm X 200mm Electric heating & tap-water cooling Digital temperature controlling system. Heaters are provided on both the plates with temp controller. Power : 1.6KW. Sensor: PT100. Any polymer having softening temperature ranging from 40oC-280oC can be tested. A power-pack is also provided. Separate heating and cooling zones. Electric motor 2 HP three phase 415 volts, 1.5KW Machine Dimensions : 92cm X 79cm X 143cm Machine Weight : 420kg Gross Weight : 539kg Total Power : 3.2 KW ‘MARSHAL’- Hydraulic Press (Advance Model) Pillar Type : Capacity 300kg/cm2 Die size : 200mm X 200mm Maximum Temperature Achievable : 300oC Automatic opening and alarm after preset time both heating & cooling zones. Separate heating and cooling zones: special cooling facility in heating zone also. Digital pressure readout. Digital temperature indicator for cooling zone. Digital temperature controller for hearting zone. Down movement by push button This machine is used normally in combination with Twin Roll Mill. These machines are used to test the performacne of pigments or polymer soluble dyes in different plastics & rubber like LDPE, HDPE, PP, PS, PC, ABS, Natural rubber, EVA rubber etc. From the melt prepared in Twin roll mill, measured piece of sample is taken and is compression molded on hydraulic press to form a fine chip. To avoid time delay separate heating and cooling zones are provided in the press. The die filled with material is subjected to high pressure in the heating zone and then is trasferred to cooling zone to solidify under pressure. This avoids warping &gives good finish and indicative chip. This machine in combination with Twin Roll Mill has become vital testing & shade matching equipment fo rplastic & master batch indus tries. Highligths : Separate heating & cooling zones to cut short the time cycle of compression moulding Pressure up to 250 kg/cm² Even heating throughout the heating zone Solenoid operated up & down movement of the plates Digital timer operated automatic opening of die plates Digital pressure gauge World standard electrical & electronic control devices

press cutting machinery