Humidity Chamber Dealers in Bangalore (15 products available)

• Power: 3 Ph Ac
• Temperature: - 30oc To 150oc + 1.0oc (As Per Requirement)
• Safety Device: Hi- Low Temperature, Water Level Sensor
• Refrigeration: ‘CFC’ Free Air Cooled Compressor
• Blower: Heavy Duty Continous Cycle Blower At The Rear Ensures Uniformity In
• Humidity: + 5% Above Amb. To 98% Or 30% To 98%
• Temperature: - 30oC TO 150oC + 1.0oC (as per requirement)
• Sensor: Pt-100 Based Wet & Dry Principle
• Door: With View Window
• Outer Chamber: Cr Sheet Powder Coated / SS
• Control Panel: Programmable Microprocessor Based Digital Temperature Cum Humidity Controller
• Inner Chamber MODEL HC-185: Mono Block Construction,
• Inner Chamber MODEL HC-1000: Stainless Steel 304 / 316
• Inner Dimension MODEL HC-185: 900 X 550 X 380
• Inner Dimension MODEL HC-1000: 1000 X 1000 X 1000

• Surface Finishing: Polished
• Material: Metal
• Application: Industrial
• Durability: Long Life
• Resistivity: Rust Resistant

Our company is recognized as one of the proficient Service Providers involved in rendering one of a kind High Humidity Room.   Details : Used to keep Flowers & and fruite where Humidity can maintain more than 90%.

• SIZE :: 455WX455DX710H MM

This is a double walled unit with mild steel powder coat painted on out side, and the inner is made of either aluminium or stainless steel. The front door has a glass window with a wiper unit. The temperature range is ambient to 60 deg. C. Dry temperature is controlled by digital temperature controller with an accuracy of ±1 deg.c. The humidity is directly controlled by a humidity indicator cum controller and the humidity is displayed in percentage. The range is from atmospheric humidity to 95% with a sensitivity of ±3% Air circulating fan is provided to maintain both humidity and temperature. The salient feature of this unit is, the water flow is automaticaly controlled by a solenoid valve. A boiler with immersion heater is housed at the bottom of the unit for creating humidity. The unit works on 220 volts ac.(without hygrometer.)

Better airflow accelerates temperature change rates and minimizes temperature gradients of the device under test.Everest models a wide range of standard and Custom-Built chambers for only temperature or temperature and humidity test’s. Its improve your product reliability. Everest model chambers available in deferent sizes it’s come with a standard temperature and Humidity ranges.

• Model No: KCS/OC – 40 H
• Temperature Range: -40 °C to +80° C
• Humidity Range: 30% to 95%
• Capacity: 500 Liter to 8000 Liter
• Controller Type: HMI with PLC

Chamber capacity : 500 liters to 8,000 liters Temperature Range : â�� 40�° C to 80�° C Accuracy : +-0.5�° C Gradient temperature: +- 1�° C. Humidity Range : 30 % RH to 95% RH Accuracy : 2% RH Gradient of Humidity : +- 3% Ozone measurement : 0 to 500 adjustable. Ozone Accuracy : +-5% CO2 : 100 â�� 700 ppm- adjustable UV : 1-25 Kjm3 adjustable. Design : Material of test chamber selected in such way that it will have minimum reaction with Ozone. The chamber so designed that hazardous ozone gas is contained internally eliminating the need to provide additional external venting and filtering of the sent gas. The ozone source is generated from fresh air from the environment using air compressor and filters. This air has passed through the container containing UV lamp as required by ASTM. The equipment provided with a generator and controlling of air ozone stream. The generator located outside the chamber. UV absorption analyzer auto measure and control concentration of ozone by the principle of measuring absorption of UV light in a sample of gas flowing through optical bench.

A range of 6 saturated humidity and salt spray cabinets. Two sizes, with either 500 or 1000 Litre internal capacities (16.6 / 35.3 cu ft). Robust glass reinforced plastic (GRP) construction, a durable impact resistant material with strong chemical and corrosion resistant properties to ensure a long life. Fully transparent and seamless domed roof providing 360° visibility, self-supporting when open. Key Features Precise temperature controlled, high humidity environment. Water held in a sump located in the cabinet base, is heated by an immersion heater to generate water vapour. As water vapour evaporates, it saturates the cabinet atmosphere with moisture. Test samples in the cabinet, below the dew-point temperature of the saturated air, will develop surface condensation. By careful design the high humidity environment is achieved without the need for a circulation fan, which would otherwise have to endure the hostile, high humidity environment. Safety cut-outs ensure the immersion heater is automatically isolated if the water reservoir runs dry.

• Brand Name: Hygro
• Accuracy: 5%
• Type: Walk in humidity chamber
• Features: Easily affordable, Long lasting materials used, Reliable and efficient, Easy to maintain, Retains the humidity level as desirable.
• Material: Staineless Steel
• Shape: Rectangular
• Automation Grade: Automatic
• Temperature range: 20 Degree C to 50 Degree C
• Temperature Accuracy: 3 Degree C
• Relative Humidity range: 40% to 98% @ 20 Degree C to 50 Degree C
• Heater: SS Tubular Heaters
• Re circulation Blower: 2800 CFM
• Operating Voltage: 440 V
• Phase: 3
• Frequency: 50 Hz
• Total Connected Load: 28 kW

Features :   Interior and Exterior both made of Stainless Steel. 3 Different model sizes: 108, 153 & 246 litres. Digitally controlled active humidification & dehumidification 20% to 95% rh. Temp range up to +90 °C with humidity, up to + 160 °C without humidity. 6 side heating – Condensation free. State of the art control technology. Humidity limit control as standard. Double Door (interior Glass, Exterior Stainless Steel). Facility to sterilize interior using STERICard. Sterilisation without removing any sensors. Various accessories available as option on request.

Humidity Test Chambers, Shakers, test chambers, Microscopes

Humidity Cabinet, Centrifugal Machines, college lab equipments

Teltech specially designed Humidity Chamber can control the humidity precisely. Inner and Outer body is made of non-corrosive stainless steel. Humidity and temperature can be measured and controlled.

Benchtop Temperature & Humidity Chambers, Cyclic Corrosion Test Chambers

sterilizers, Stripping Machine, process recorder, Wire Cutting Machine

Furnace, ir drying oven, microwave heating system, uv curing chamber