Transmitter Device Dealers in Bikaner (2 products available)

  • Explosion proof DP Transmitter

    Explosion proof DP Transmitter

    Get Price Quote

    1 Piece(s) (MOQ)

    • Brand Name: Fischer

    Working Principle: -Fischer DE38 DP Transmitter uses a tough yet flexible sensing diaphragm embedded between stiffening plates and balanced by springs on either side. Linear displacement of this LVDT is proportional to the pressure difference across the diaphragm. Thus, this displacement is converted to electrical signal output. An optional output signal can be slew rate limited, spreaded, inverted and transformed non-linearly by means of a table function. Key Features: 1.Explosion proof ATEX certification with CE Ex II 3 G c EEx nA IIC T4 for DE38###R and CE Ex II 3 D c IP65 T125 for DE38###S 2.Robust design with high repeatability 3.Over pressure protection 4.Wear free non-contact LVDT sensing element, thus no maintenance 5.Signal output with possibility of various characteristic curve 6.Characteristic conversion of output via 3….30 entries table 7.Complete set-up of all parameters and print out by using optional PC programming interface EU03 8.Measuring range: 0-400 mbar to 0-1600 bar 9.Operating temperature: Ambient: -10°C to +70°C; Media:-10°C to +70°C 10.Protection class: IP65 per DIN EN 60529 11.Output: 04-20mA, 0-10 VDC 12.Display: 3 ½ digit LCD Applications areas: 1.Monitoring of compressors, filters and vacuum systems 2.Measurement of differential pressure between supply and return fuel lines in heating & cooling systems (Chillers) 3.Flow measurement – lubricants, oil, hydrocarbons, water, gases 4.Control pressure – air, gases, oil, water, lubricants 5.Level measurement- tank, container of lubricants, oils, water, liquids etc Industrial areas: 1.Cement plants 2.Nuclear plants, coal or gas fired power plants 3.hydro power plants 4.Manufacturing and chemical plants

    more..
  • programmable pressure transmitter

    programmable pressure transmitter

    Get Price Quote

    Fischer ME50 is programmable pressure transmitter for liquid and gaseous media. It is equipped with: Ceramic membrane / diaphragm measuring cell for measuring range upto 400 mbar Front-flush piezoresistive element based measuring cell for measuring range above 400 mbarME50 can be configured or programmed to suit onsite conditions and media via either onboard display keypad or tool adaptor EU13. Working Principle: For ceramic diaphragm measuring cell (< 400 mbar): The measuring pressure is directly applied on the rugged ceramic diaphragm. This applied pressure cause distortion on measuring membrane. The change in capacitance due to pressure, is measured at the electrodes of the ceramic carrier and diaphragm.The electronics in the pressure transmitter housing convert the change in capacitance into standard electrical signals. For piezoresistive diaphragm measuring cell (≥ 400 mbar): The measured pressure acts on silicon diaphragm of a semi-conductor chip, causing it to distort. The specific resistance of the material changes in proportion of the level of distortion. The electronics module in the pressure transmitter convert the change in resistance into standard electrical signals.   To optimise performance in line with prevailing process conditions, it is also possible to configure the pressure transmitter on-site via PC based programming adaptor EU13. Key Features: Onboard digital display, for measuring values Free choice of process measurement direction , axial or radial configurable on-site via onboard 3-key menu (off-set, range, damping, display indication) Robust housing High accuracy High vibration resistance Low hysteresis Key Specifications: With ceramic membrane / diaphragm measuring element: Measuring range: -25 ~ +25 mbar to 0 ~ 200 mbar smallest adjustable measuring span: 10 mbar overpressure safety: 4 bar With piezoresistive element measuring sensor ceramic membrane / diaphragm measuring element: Measuring range: 0 ~ 400 mbar to 0 ~ 40 bar; -0.6 ~ 0 bar to -1 ~ 15 bar overpressure safety: 4 bar to 120 bar Accuracy: ± 0.2% of full scale (including hysteresis and repeat accuracy) Permissible ambient temperature: -20° C ~ +80° C Permissible medium temperature: -10° C ~ +85° C Electrical connection: M12 plug-in connector Protection class: IP65 acc. to DIN EN 40050 Display: 3 1/2 digit LCD Materials (media contact): stainless steel 1.4404, ceramic AL2O3, Viton Seals Material (housing): stainless steel 1.4404 / 1.4571 Nominal power supply: 24 VDC Output: current / voltage 4~20mA,  2-wire Inverted curve: rising / falling Damping: 0 ~ 200 sec   Industrial areas: Nuclear power plants Thermal / gas fired power plants Chemical & manufacturing industries Semiconductor plants Glass industries  

    more..
  • Best Deals from Transmitter Device

Filter by Locality
top