Slump Cone
Get Price Quote
We are offering slump cone.
Pneumatic Ply Bond Tester
225,000 Per Piece
1 Piece (MOQ)
Description: Our Internal Ply Bond Tester is designed for determining the Internal Bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy, in thousands of foot pound required to delaminate the specimen in two piles, as described by the TAPPI Routine Control Method RC-308. It is made of heavy cast iron base with built-in leveling device pressure senditive tape dispenser intergral with base. It works with Pneumatic Air supply for auto clamping of samples through air pressure. It is newly made upgraded model which saves time and gives more accuracy for samples.
Best Deals from Testing Equipment
Thermal Conductivity Of Insulating Powder
44,000 Per piece
1 Piece (MOQ)
The unit consists of two thin wall concentric copper spheres. The inner sphere house the heating coil. Heating coil is made up of nichrome wire wound on mica sheet. The insulating powder packed between two shells. Power supply to the heater is given through a dimmerstat& is measured by voltmeter & an ammeter. Temperature can be measured with the help of thermocouples. Four thermocouple are embedded on inner sphere and six thermocouples are embedded on outer sphere. The entire ten temperature indicator, these reading enable of insulating powder.
Magnetic Flow Meter
20,000 - 500,000 Per Piece
1 piece (MOQ)
Digital Conductivity Meter
9,400 Per Piece
1 Piece (MOQ)
Digital Tensile Strength Tester
Get Price Quote
We, being a prime Manufacturer, Exporter & Supplier in the industry, offer Digital Tensile Strength Tester. Tensile Strength Tester is applied in a number of industrial purposes. The quality is ensured to be in compliance with the standards and parameters set by the industry. We make it available in a number of specifications. The durability, corrosion resistance and dimensional accuracy of Digital Tensile Testing Machine make it a popular choice for varied purposes. Specifications Vgotech Tensile Strength Testing Machine – Digital with Floor Model Capacity of M/c – 5000N/500Kgf with Load Cell for display of Breaking Strength and Elongation. Least Count - 1N / 0.1Kgf Speed - 300 & 100mm/min. Grips for Lea and fabric – 100mm. Maximum Grip Separation –1000mm and Minimum Grip Separation – 100mm Load Cell - S Type Power - 440V. Drive – 1H.P. Geared Motor – 3 Phase. Safety Device : Limit Switch for over travel protection & overload Indication in Load Monitor.
Digital Soil Moisture Meter
4,000 Per Piece
1 Piece (MOQ)
We manufacture highly efficient Digital Soil Moisture Meter to detect the percentage of moisture available in soil, coal, cement and sand. Used by diverse industries these apparatus have pen to mark content of moisture in soil and is available in proper case. Manufactured as per the specifications of our clients the equipment are in wide demand across the globe. User friendly Robust and reliable Dimensionally accuracy Compact design
Instrumentation Panel
Get Price Quote
1 Piece (MOQ)
Material Testing Equipment
Get Price Quote
We bring forth a diverse range of optimum quality Material Testing Equipment which is fabricated using high grade metals and by employing advanced technological methods. Utilized for the purpose of testing the various physical properties of different materials, our Construction Material Testing Equipment comprise of Spring Testing Machine, Pendulum Impact Tester, Izod Charpy Testing Machine, Tensile Testing Machine, Universal Testing Machine, Torsion Testing Machine for Rod or wire, Bursting Strength Tester, Hardness Tester, Flex Tester and Abrasion Tester. Aiding in quality assessment, product development as well as other research activities, our Universal Material Testing Equipment is used for testing Rubber, Plastic, Footwear, Leather, Paper and Petroleum products. We are engaged in manufacturing equipments both in standard as well as per customer’s special requirement. This has made us one of the prominent Manufacturers in our domain.
MIKO-1 Digital Milliohm Meter
Get Price Quote
Specifications : Range of measured resistances Rx, mOhm ..0-20000 Limit of absolute basic error in measurement, mOhm .±(1+0.01*Rx) Weight of microohmmeter, kg 3.6 Dimensions, mm 210*235*75 Operating temperature range, C -15 ÷ +40
Tablet Hardness Tester
Get Price Quote
1 Piece (MOQ)
To sustain a valuable place in the pharmaceutical industry or for its product manufacturer, it is vital to know the compliance value of a solid tablet. Since solid tablets are the most prescribed dosages world-wide, they form a crucial part in stabilizing the economy and reliability of a pharma or lab. This is the reason for an increase in analyzing its hardness and accordingly planning its coating, packaging and transporting facilities. Raise Lab has been seeing quality and durability in its lab equipment with high priority so the end consumers are profited. The tablet hardness testers that we manufacture and offer are of top-notch working quality. Types of tablet hardness testers A wide range of tablet hardness testers have been sweeping the lab equipment / analytical lab /quality control market, making it tough to choose. From manually operated tablet testers to automated testers, there is a huge lot. But the working principle remains unchanged as the primary requirement of measuring tablet hardness is to assess its disintegration point. Advantages of owning a tablet hardness tester To own one leading pharmaceutical or a quality control lab, it is indeed beneficial to have one tablet hardness testing apparatus in the vicinity. The prime advantages of its uses and benefits include: If the tablet is not hard enough, it could not comply with the standards of quality and is prone to cracking or chipping before it could be processed further. The equipment doesn’t just ascertain the breakage point and disintegration values but can aid in the quality control as well. The latest apparatus from top lab equipment manufacturers like Raise Lab Equipment can also aid in measuring the diameter, length and thickness of the solid tablets. This is to control and acknowledge the air entrapment, formulation analysis, etc. If tested poor in structural integrity, pharmaceuticals get a chance to correct their product development. Since solid tablets should not be too fragile in strength as they tend to prematurely disintegrate in patients’ stomach with their purpose going in vain. Introducing the Monsanto Type Tablet Hardness Tester, available in three models: RMH-1, RMH-2, and RMH-3. This precision instrument is designed for the accurate measurement of tablet hardness, making it an essential tool in pharmaceutical quality control and research laboratories. Product Description: The Monsanto Type Tablet Hardness Tester is a compact and user-friendly device specifically engineered to assess the hardness of tablets with precision. It comes in three different models, each catering to varying sample sizes and measurement requirements. Key Features: Measuring Range: All three models offer a measuring range of 0-20, allowing you to assess a wide spectrum of tablet hardness levels. Readability: With a readability of 1 kg, the device provides accurate and easily interpretable hardness measurements. Units of Measurement: Hardness measurements are displayed in Kilograms per square centimeter (Kg/cm²), providing a standardized unit for assessment. Sample Size: Depending on your specific needs, you can choose from the three models with different sample size capacities: RMH-1 (0-25), RMH-2 (25-40), and RMH-3 (25-50). Operating Instructions: Using the Monsanto Type Tablet Hardness Tester is straightforward: Position the tablet between the jaws and nozzle in an edgewise orientation. Adjust the scale by sliding it so that the zero on the scale aligns with the pointer. Slowly turn the screw knob until the tablet breaks. The pressure applied to break the tablet is indicated on the dial in Kilograms per square centimeter (Kg/cm²). Maintenance Tips: To ensure the longevity and accuracy of the device, it’s essential not to keep the spring under tension when the tester is not in use. In summary, the Monsanto Type Tablet Hardness Tester is a reliable and efficient tool for assessing tablet hardness in pharmaceutical applications. Its ease of use, multiple model options, and precise measurements make it an indispensable asset for quality control and research in the pharmaceutical industry
Bosch Nozzle Tester
Get Price Quote
1 Piece (MOQ)
GSR Meter
36,000 Per Piece
1 Piece (MOQ)
Transformer Winding Resistance Tester
Get Price Quote
Our organization is a budding Exporter and Supplier of Transformer Winding Resistance Tester based in Maharashtra. Designed for large power transformers and medium power transformers with on load tap changers, the Transformer Winding Resistance Tester is known for its high efficiency, accurate reading, reliability, and durability. It is suitable for measuring in charged substation as well as in the manufacturing plant. Available at market leading prices, our Transformer Winding Resistance Tester comes in different models to suit diverse requirements of our customers.
energy meter panel
Get Price Quote
We are backed with advanced logistics services owing to which we are flexible in delivering the product range of time and with utmost safety. We are committed towards providing quality-assured products to the customers and thus we check them stringently before making the final dispatch.
Gloss Meter
43,000 Per Piece
1 Piece (MOQ)
RT 02 Roughness Tester
Get Price Quote
We are a reckoned manufacturer of ROUGHNESS TESTER RT 02 which is proficient to test roughness of different kinds of material. These use piezoelectric type sensor to detect roughness of material and thereafter, testing the frequency. Our clients can assess these testers on the basis of samples we offer. We offer sample various sample length such as 0.25 mm, 0.8 mm and 2.5 mm.
Amrutha SZDT-4 Breath Alcohol Analyser
2,500 Per Piece
Gas Cylinder Ultrasonic Testing Machine
Get Price Quote
1 Piece (MOQ)
Automated ultrasonic inspection solution for Industrial Cylinder for Longitudinal & transverse oriented OD/ID flaws as well as wall thickness monitoring symultaneously in one go. The test system follow the test requirement as per specification IS 8451. The economical test electronics DS 848 – max 8 channel manufactured by EECI has been used to test the job. The UT test channel has independent setting of UT parameters for each channel & can be generate the encoder based test report or time based test report having each channel strip chart. The customer logo can be incorporated on the test report if required. The high end solution can also be done with using the DUT-e08 based test electronics which will have industrial grade PC hosts the acquisition and analysis software.
Computerised Brinell Hardness Tester
Get Price Quote
Computerised Brinell Hardness Tester is a simple and an accurate means to produce Brinell impression and automatically measure it. The Computerised Brinell Hardness Tester, which we offer, gives direct display of Brinell hardness number. These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed. These Computerised Brinell Hardness Testers strictly confirm to IS : 2281-2005, BS : 10003-2 and ASTM E-10. Technical Data Total Load : 500 to 3000 in stages of 250 kgfMeasurement Range : 1-6 mmMax. Test Height : 410 mmScale least count : 0.01 mmThroat depth : 200 mmMachine Dimension (Approx.) : L 995 x W 400 x H 1178 mmWeight (Approx.) : 450 mmPower Supply : 415/50/3 V/Cy/Ph The Software Includes Facility for Auto / semi Auto / Manual modes of operation.Well managed database saves readings w.r.t. batch and certificate.Report generation in the form of certificate and graph with variation and histogram.Facility for calibration and check of calibration. Advance image processing algorithm implemented for automatic measurement.Statistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum reading.Measuring scale Calibration / Verification on PC monitor. PC requirements gigahertz (GHz) or faster processor 1 gigabyte (GB) RAM minimumMicrosoft Windows 7/8/Vista/XP operating systemDisplay screen resolution minimum 1024 by 768 pixelsTwo free USB 2.0 ports Standard Accessories Testing table 200 mm dia (1 Piece)Testing table 70 mm dia with "V" groove for bround jobs 10 to 80 mm dia. (1 Piece)Ball holder 5 mm (1 Piece)Ball Holder 10 mm (1 Piece)Test Block HB-5/750 (1 Piece)Test Block HB-10/3000 (1 Piece)Allen Spanner (4 Pieces)Telescopic Cover for elevating screw protection (1 Set)Electric Cord & PC interface cord (1 No. each)USB Video Capture (1 No.)Interface box (1 No.)Software CD (1 No.)Instruction manual (1 Book)
QTTR-3 Transformer Turn Ratio Meter
Get Price Quote
1 Piece (MOQ)
Features : Automatic operation, No balancing is required Measures and displays transformer ratio 3½ digit LED display of ratio. True 4 terminal measurement. Resolution of 0.01 in the range 20 Fully protected against any wrong connections. Single Phase / three phase model
Magnetic Tripping Test Apparatus for MCB
65,000 - 85,000 Per 1
1 Piece(s) (MOQ)
Model 450A-1 Digital Pocket Size Carbon Monoxide Meter
Get Price Quote
Model 450A-1 Digital Pocket Size Carbon Monoxide Meter Measures Up To 999 ppm, Audible Alarm The Model 450A-1 Digital Pocket Size Carbon Monoxide Meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in backlight brightens the display. Model 450A includes soft carrying case with belt loop, wrist strap, and batteries. ModelDescription 450A-1Digital pocket size carbon monoxide meter. Specifications Range:0 to 999 ppm. Accuracy (at 20 ±5°C, 50 ±20% RH):±20% @ 0 to 100 ppm; ±15% @ 100 to 500 ppm. Resolution:1 ppm. Display:Dual digital LCD display. Response Time:Less than 60 seconds. Sensor:Electrochemical carbon monoxide sensor. Temperature Limits:-10 to 60°C (14 to 140°F). Humidity Limits (Non-Condensing):5 to 99% RH. Power Requirements:(3) 1.5 V AAA alkaline batteries, included, user replaceable. Battery Life:250 hours with backlight off; 35 hours with backlight on. Weight:4.23 oz (120 g). Alarms:Audible, preset at 25 ppm. Agency Approval:CE.
Dyne Test Pen crona treatment tester
444 - 555 Per piece
10 Nos (MOQ)
Use for surface check tester pen
Dissolution Rate Test Apparatus
Get Price Quote
Dissolution Rate Test Apparatus Manufactured By Our Company Consists of 4 Main Parts. the First Part of Tablet Dissolution Rate Test Apparatus is Water Bath with 500 Watt Heater Accompanied By Digital Temperature Control. the Second Part is Variable Speed Motors, with 30 M.m S.s Shaft with Digital R.p.m. Meter. the Third Part Dissolution Rate Test Apparatus is Its Cylindrical Glass Vessel with the Capacity of 1000ml and the Fourth Part is Imported Thick Acrylic Sheet Along with Transparent Cover At Top. the Stirrer Shafts of Dissolution Rate Test Apparatus Offered By Our Company Can Be Adjusted Up and Down Easily with Its Button Switch. We have Emerged as One of the Reliable Digital Dissolution Rate Test Apparatus Suppliers. Disslution Rate Test Equipment Six Stage The Apparatus Consists of 4 Main Parts. First is Water Bath with 500 Watt Heater with Digital Temperature Control. Second is Variable Speed Motars, with 30 M.M., S.S Shaft with Digital R.P.M. Meter. Third is Cylinderical Glass Vessel 1000 M.l. Fourth is Imported Thick Acrylic Sheet with Transparent Cover At Top. You Can Eassily Up and Dowen all the Stirrer Shafts with Help of Button Switch. Features : Digital control panel gives a fine look to apparatus. Built on a sturdy powder coated M.S angle frame covered. with M.S. powder coated sheet. Transparent acrylic container with six glass vessels. Digital R.P.M. and temperature meters and touch button controller make it easy for operating. All stirrer shafts are made by a stainless steel. Industrial lab. use apparatus can be provided on order.
Unbreakable Line Tester
11 Per Piece
100 Piece (MOQ)
Digital Insulation Tester
4,000 Per piece
1 piece (MOQ)
Brightness, Opacity & Color Tester (Microprocessor Based)
300,000 Per piece
1 Piece (MOQ)
4 Wire Energy Meter
4,000 Per Piece
50 Piece (MOQ)
Humidity Data Logger
4,500 - 15,000 Per piece
10 piece (MOQ)
Specifications: temp range -40 to 70 c -40 to 158 f temp accuracy .1 c humidity range 0 to 100%rh humidity accuracy 2%rh memory 32000 (16000 each for temperature and humidity) measuring rate 1sec.to 24h battery life typically 1-3 years.
