Back Back
Plain Board
Metal Framed Partition (Double Layer) Double layer Hilux metal framed, non load bearing Partitions, are used to enhance insulation properties. These can also provide more high Partitions up 4000 mm. These are assembled at site, using two layers of Calcium Silicate Boards, screw fixed to either side of light weight cold rolled galvanized steel studs which are placed vertically into G.I. floor and ceiling channel at 610 mm centres and are suitable for any type of decoration after filling and finishing of the joints. The System has in-built provision for concealed electrical & plumbing services because of cut-outs made in the web of studs. Frame Work Floor & ceiling channel is screw fixed to the floor with the help of nylon sleeves and wood screws at 450 mm centres. The same channel is then fixed to the soffit making it plumb to the floor channel in the same manner. The studs, cut 5 mm shorter, are placed vertically into the floor and ceiling channel at 610 mm centres. The cut-outs of the studs are kept in a line to accommodate services. Fixing channel is also fixed horizontally if the Partition height exceeds the board length on both side of stud. Necessary metal or wood batons are also incorporated to accept load of any material like cupboard etc. at this stage only. Board Fixing Two layers of Hilux Tapered edge boards are screw fixed to either side of stud and channel by self drilling & taping screws having Phillips head with under head cutter, of suitable length (10 mm thickness of the board) at 200 mm centres, keeping 12 mm away from the edges and 40 mm from the corners. No screw is to be provided at the centre in first layer of boards on both sides because screws of second layer will penetrate through the first layer, i.e. first layer boards are to be screwed at the edges only. A gap of 1.5 - 2 mm is also provided between the boards. The square edges of outer layer boards, are chamfered by 4 x 3 mm, or made tapered (40 x 1.5 mm) at site, by grinding them, before fixing. The vertical joints are staggered in each layer and also in respect to the other side, to maintain the alignment and strength of the Partition and also to avoid through joints to maintain Performance criteria. Jointing & Finishing Hilux Calcium Silicate Boards joints of outer layer are filled and finished with specially formulated jointing compound and 48 mm wide fiber tape to get seamless finish. Cement primer (Oil based) to be provided on entire surface before putty / painting.
...more
moisture resistant board
Characteristics Gyproc Moisture Resistant consists of an aerated gypsum core with special water repellent additives encased in and firmly bonded to, strong moisture-resistant paper liners that are green. Application Suitable for use in both ceilings and drywall partitions in wet areas of interiors like bathrooms and kitchens. Also suitable as a base for tiling in these wet areas and for external soffits in sheltered positions. Identification Green face paper Green reverse side paper Manufacturing Standards IS 2095 - Part l, 2011 Thermal Conductivity0.24 (W/m°K) Additional Properties Absorbs less than 160gm/m2 of water during surface absorption tests Tiles up to 12.5mm thick and 32 kg/m2 can be fixed using 3mm adhesive
...more
Magnesium oxide board
Magnesium oxide(MgO)has been used dating back thousands of years.it has been founf that magnesium oxidew was used in the Great Wall of China as a cement form.China has the world's largest deposits of magnesium oxide,which is sufficient to resupply the world with cement fibre,gypsum and wood partationing and ceilings every year for the next 800 years.Magnesium oxide board(MgO board)is a factory-made,insulating sheathing board product.it is made primarily of magnesium oxide,and is commonly called simply(MgO)due to its chemical composition of magnesium and oxygen.MgO Board is similar to gypsum board or cement fibre board-however with several improved characteristics such as fire resistance,weather ability,strength,resistance to mould and mildew,flexibility,aderence advantages and so on.it can be used indoors and out doors and in damp locations as showers or wet areas.Like cement based sidings,if Mg0 is used out doors in an exposed location,it needs sealing in much the same way as cement.Mgo is used structurally,as in bracing for walls,and also semi-structurally,such as an underlayment for flooring.Magnesium oxide board was developed many years ago as a cheap alternative to cement fibre board.it turned out as a coincidence to be a product with many other advantageous characteristics.Mgo Board was extensively used in construction during the 2008 world olympics buildings in beijing...and was used in the world famous Taipei 101 building which up untill recently was the world's tallest building.
...more
Foil Back Board
Characteristics Gyproc Foil Back is a gypsum plasterboard with a smooth, white PVC film in the front and vapour control film at the back. Application It is used for partition, linings and suspended ceiling systems in industrial and commercial buildings. Identification Grey face paper Metallised polyester film Manufacturing Standards IS 2095 - Part l, 2011
...more
fireline board
Fireline Board Characteristics Gyproc Fireline consists of an aerated gypsum core with glass fibre and other additives encased in and firmly bonded to, strong paper liners that are pink. Application Suitable for applications in ceilings and drywalls where a high level of fire protection is required. Identification Pink face paper Brown reverse side paper Manufacturing Standards IS 2095 - Part l, 2011BS 476 – Class 1 material (Surface spread of flame)
...more
False Flooring
We bring false flooring services for our esteemed clients that are very fashionable and reliable too. Our Offering false flooring are highly appreciated due to their durability and giving contemporary look to offices and commercial units.we enable our clients to design selection of their choice. We are offering in different sizes and ranges too that are very appropriate for commercial and domestic purposes. We are facilitating and fix the range in office places, computer labs, main halls and others required places too.
...more
duraline board
Characteristics Gyproc Duraline is a gypsum plasterboard with a higher density core and glass fibres. It is designed for use in drywall partition systems to give greater impact resistance in heavy use areas. Application Suitable for application where high level of impact resistance is specified. Identification Yellow face paper Brown reverse side paper Manufacturing Standards IS 2095 - Part l, 2011 Thermal Conductivity0.24 (W/m°K)
...more
Indenting Agents
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Arunachala Enterprise
