Decorative Paint Dealers in T Nagar, Chennai (22 products available)

• Feature: Quick Drying at room temperature
• Country of Origin: Made in India
• Form Of Paint: Liquid

We offer a complete line of premium, highly durable stains and varnishes that will beautify and protect your wood for years. Woodsman 100% Acrylic Water Repellant A water repellant coating excellent for use on new wood A clear protective coating that enhances & protects the beauty of the wood

3M Unitek brings you innovative adhesive solutions for all your orthodontic bonding and banding needs. From Transbond™ XT Light Cure Adhesive to Transbond™ Supreme LV Low Viscosity Light Cure Adhesive, all our adhesives and primers offer uncompromising quality and reliable performance.Transbond™ XT Light Cure Adhesive: Transbond XT Light Cure Adhesive bonds metal and ceramic brackets to tooth surfaces. Available in both syringes and capsules, this adhesive uses light cure adhesive technology to provide you with additional working time to ensure accurate bracket placement. The viscosity of Transbond XT adhesive was designed to prevent adhesive run-on and bracket skating that saves you money and reduces adhesive waste. 3M Unitek's adhesive-filled capsules and dispensing gun also provide for easy application, increased control and convenience. A syringe delivery system is available too. Best of all, the Transbond XT adhesive's quick cure provides for immediate archwire tie-in so your patients and staff can experience shorter bonding appointments. The products from this category supplied by Jamuna International are:

We offer Titanit Anti Corrosion Primers made from superior and high quality materials. Due to their excellent adhesion properties to zinc, steel and aluminum surfaces, TACP act as a reliable and strong corrosion protection mechanism. TACP are designed for priming of metal and wooden surfaces for coating with various enamels. With a shelf life of 24 months, the primer can be stored at a temperature of up to 35 degree centigrade.Anticorrosion primers which acts as “ Anti Corrosion Coating for Flame retardant systems / Steel Reinforcement Coating (Titanit)Anticorrosion coating for flame retardant systems Steel reinforcement coating Titanit- Primeranticorrosion Primers - (1 Component)Base: one - component ,% : 55 ± 2% by volume; 2 + 68% by weight Solids Volume,% : 55 ± 2% by volume; 2 + 68% by weightDensity: 1.3-1.4 kg / liter (ready to apply mixture)Drying time: at a temperature of 20 ± 2 ° C is 24 hoursFilm thickness: 0,50-1,0 mm Consumption: 0,10-0,13 kg / m2The fineness degree: 50 micronsWarranty period of storage :12 months from date of manufacture. The main advantages Sphere of application Material properties, specificationsApplication: Excellent adhesion to steel, zinc and aluminum surfaces; Short recoating time; Reliable corrosion protection Easy application"Titanit" primer is designed for priming of metal (ferrous metals) and wooden surfaces for coating with various enamels. "Titanit " primer is universal, used in complex covering with almost all fillers and finishingenamels, and can also be used as an independent coating. Primer is very comfortable in use,applied by various methods. "Titanit" primer meets the state sanitary epidemiological rules and standards.High resistance to climatic influences in rural, urban and industrial atmosphere, to mineral oils and greases.Can be used as a standalone coating under the same conditions.The film has a high resistance to common purpose nitro enamels.Resistant to temperatures from -45 to +60 ° C. primerPneumatic and airless spraying, spraying in electric fields, jet flow coating, dipping, brush in two layers Apply at ambient temperature of +5 to +35 ° C and relative humidity of 80%. Temperature of the substrate must be at least 3 ° C above the dew point. "Titanit" primer is compatible to the most of decorative and finishing paints and varnishes.Consumption Thickness Storagesingle layer of primer is 100-130 g / m². single layer is 20-25 microns, two layers - 40-50 microns.Drying time of each layer at a temperature of 20 ± 2 ° C - 24 hours. It is permitted to dry the primer at 105 ± 5 ° C during 35 min. After drying, before applying the enamel, the primer coating is incubated during 3 h at a temperature of 20 ± 2 ° C. The primer is stored at a temperature of -40 to + 40 ° C.Feature on the basis: two - component (base + hardener)Solids Volume,% - 50 + 2% by volume (68 + 2% by weight)The ratio of mixing the base and hardener - 4: 1 (by volume)Pot life of mixture - up to 6 hours at +23 ° CFilm thickness - 0,50-1,0 mmConsumption - 0,12 - 0,25 kg/m²Packaging - Base 16 L / hardener 4LShelf-life : 24 months The temperature at transportation and storage: 0° C - +35 ° CTechnology of formation of primer-layer: Technology of the primer-layer formation must meet the requirements of technological regulations (instructions) to the applicable fire protection means, as well as the requirements and instructions for the formation andoperation of coating based on primer "Titanite-EP Primer» â�� 004-I / Y.Basic conditions while performing works on application of the primer on treated metal Dry, clean, degreased surface, free of corrosion, scale, etc. Ambient Temperature - min +5 ° C. The relative humidity - less than 85%. Temperature of the painted steel structure surface must be above the dew point of not less than 3 ° C.Technical description: "titanit- Ep Primer" is used for forming the primer layer in the systems of flame retardants based on fire retardant pain "titanit- Ep Primer, "GARANT-M" for steel structures, as well as the "TITAN-ST", "TITAN 225-B " for concreteStructures : In addition, the ground "TITANIT- EP PRIMER"is used for priming of steel, aluminum, zinc and concreteSurfaces : exposed to mechanical and / or chemical attack, both inside and outside the premises."TITANIT- EP PRIMER" is recommended as a corrosion protection of building frameworks, tubular bridges, bases forpriming concrete structures transport tunnels.Documentation:Certificate of compliance: Technological instruction number 004-I / Y on the formation andoperation based on coating primer "TITANIT- EP PRIMER".

• Packaging Type: Plastic Bucket
• Packaging Size: 2.9 Kgs
• State Of Origin: Russia

Mastered in domain, we are engaged in offering large array of Interior Acrylic Paint. Our product is provided in various colors and shades as per the client’s needs. The offered product enhances the look of the place where used and provide fine finish. Customers use our product for their effectiveness and high grade quality. Features: Self leveling toppings Widely known Affordable

• Packaging Size: 20 Ltrs
• Features: Provides a smooth, luxurious finish to your wood and metal
• Coverage: Interior and Exterior
• Surface Of Application: Metal and Wood
• Paint Base Type: Oil Based Paint
• Type Of Enamel: Premium Enamel
• Form Of Paint: Liquid
• Coats Required: 2 coats

• Packaging Size: 40 Kg
• Packaging Type: Bag
• Brand: Asian Wall Putty
• Usage/Application: Construction
• Raw Material: Acrylic
• Putty Form: Powder
• Finish: High Gloss
• Water Resistance: Yes

• Packaging Type: Bag
• Packaging Size: 30 kg
• Putty Form: Powder
• Brand Name: JK
• Country of Origin: Made in India
• Raw Material: White Cement Based
• Color: White
• Usage/Application: Interior
• Finish: Matt
• State: Power Coating
• Compressive Strength: 9 N / mm sq (28 days)

Decorative Paints

wood finishes, Adhesives, specialty polymers, Industrial Adhesives

Decorative Paints, MS RODS

Decorative Paint, Allied Products

• thermal stability: exceptional handling
• aesthetics: white color

Get 30% OFF on Ceramco 3 Dentin porcelain. Dentsply International laboratory products. For details https:goo.glf6ELQs

distempers, Varnishes, Adhesives

Primers

metal coat paints, wood coat exterior painting, wood coat painting

stucco, concrete roof tiles, paint coatings, Cement Coatings, Pavers

Distemper, Varnishes

Anti Corrosive Paint, Chemical Water Proofing, Epoxy Coating

distempers, Paint, Varnishes