Electronic Connectors Dealers in Chennai

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time.  To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

The MCX 50 ohm connectors are push and lock series which are ideal for space saving inter connectors. These connectors are very reliable for usage up to 2 GHz applications.Srinar MCX connectors are manufactured to ensure conformity to CECC 22220 specifications.

Tempsen offer thermocouple connectors, heavy duty thermocouple connectors, miniature thermocouple connectors, J type thermocouple connectors, K type thermocouple connectors and R type thermocouple connectors, RTD sensor connector ( 2 wire, 3wire). This connector for temperature compensating ( avoid error), colors available as per international Standards. We have along with thermocouple also

We offer a wide range of Wire Connectors that are manufactured at our sophisticated production facility and by utilizing high grade raw materials. Our Wire Connectors are known for their superior strength, easy installation and lightweight. These connectors are tested on various parameters to sure a flawless range is reached to our customers. We are a prominent Wire Connectors Supplier from Tamil Nadu (India). We make them available as Twister 340 Wire Connector, Twister 341 Wire Connector etc.

Time-saving advantages:      ► Pre-filled with oxide inhibitor      ► Pre-insulated for faster installation      ► Contaminant-free due to solid end caps      ► Range-taking (reduced need for connector inventory)      ► Dual Rated (AL9CU) for copper and aluminum applications=      ► Multiple configurations accommodate a variety of applications

Type of terminals 12" Lead or Post Terminals Junction Box Two flexible fiberglass insulated lead wires without junction box. Protected fiberglass Wires with G.I or SS flexible conduct. Vertical/horizontal male plug on the heater Max. Amp 16 at 250V. Fiberglass wire exists between Inner and Outer sheath. Post terminal option available at 19 mm length. Ceramic connectors Max. Amp - 25 A When ordering please specify : Inside dia. & width of the heater. Wattage & Voltage. Construction type Type of terminals required. Drawing where special type of holes or cutout required.

The company offers a wide range of the Multi Pin Connectors, which is used as panel-mounting connectors. The Multi Pin Connectors are an integral part of the equipment and they are used in junction boxes. As a Manufacturer and Supplier of Multi Pin Connectors, the company offers a wide range of 20-55 mm with 2-35 multi-pin connections.

Accordance with IEC61754-13, KS C6970 (F01), JIS C5970 (F01) Telcordia GR-326-core tested Enhanced high quality with improved optical features (Splice Loss & Return Loss) Enhanced & improved highly Tensile Strength (exceeding 60N)

Little circuit for your USB charger projects and onboard USB device supply solutions. (ie  GoPro cameras) You can supply it with single cell LiPO or an AA size batter or others. Great Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie  GoPro cameras) You can supply it with single cell LiPO or an AA size batter or others.  If you need higher current , please check our 2.5v-5v to 5v 1000ma StepUp Module T wo AA batteries it can output current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, digital products supply. this module output power affected by itself load capacity ,also affected by the fore power and after load level etc.numbers of factors; the following data for professional equipment measureing results, regardless of other factors. Power supply module is an electronic component, persons without electronic expertise to buy carefully. Input mode: IN+ input positive, IN-input negative Output mode: standard USB 1 small PFM control DC / DC boost controller chip onboard 2, any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500 ~ 600MA single AA battery power supply output current 200ma about for mobile phones camera, single-chip, digital products supply. Stable output 5V DC voltage 3 onboard USB female, can be directly powered USB interface device with USB female, versatile 4 on-board input voltage indicator 5, PCB size: 34 (mm) x16.2 (mm) ultra-small size, installed in a variety of small equipment Shipping list: 5V boost module x 1

Hydraulic hose is rarely used without connectors. Hoses with connectors attached are commonly referred to as hose assemblies. The range of hydraulic hose connectors conforms to SAE (American Standards), BS (British Standards) and DIN (German Standards).

When we talk about secure connections, you can take us at our word. EPIC® industrial connectors produce an absolutely secure connection in combination with ÖLFLEX® cables. We provide the right contact for all your needs: From rectangular or circular connectors, to housings, inserts, contacts and accessories, bus or fibre optic cable applications

Fc connector, Low insertion loss, High return loss, High interface performance, Differential colour coded, UL standard accessories, comply with RoHS. Latched push-pull integrated.

Tempsen have customized High Temperature Thermocouple Type ‘K ‘ up to1200°C, ‘S’ up to1600°C, ‘B’ up to1800°C Available range of 0 to 1800 ºC. assemblies find applications in temperature measurement of Furnace, Oven and other High Temperature Application of corrosive or non-corrosive nature. High Temperature Pressure assemblies with SS thermo wells and weld on flanges are offered on request. A wide Variety of designs, diameters, lengths and materials of sheaths ( ceramic SS) can be offered along with standard designs. High precision test Thermocouples duly calibrated from recognized test laboratories. Available with Aluminum Head with IP 65 weather proof or Flame proof

The SMC connector line includes inch and metric one touch fittings, fitting manifolds, and pneumatic tubing available in multiple colors, sizes, and materials: Comprehensive line of inch or metric sized fittings, speed controllers, and tubing Includes clean room options and a broad set of specialized fitting and pneumatic tubing options Integrates one-touch fitting technology in both pneumatic fittings and speed controls Provides stainless steel fitting and brass fitting options Improves energy consumption, by providing lower pressure return stroke options Air cylinder speed control is critical to the longevity of your machine operation