Self Drilling Screws
1 Per Piece
Bottle Screws
Get Price Quote
Our company is widely appreciated in the wholesaling, retailing and trading Bottle Screws. Keeping in mind the all requirements of our patrons, we are offering these bottle screws in a variety of sizes, designs and shapes. These are procured from certified and trustworthy vendor. Furthermore, these are in compliance with international industry quality standard. Last but not the least, these bottle screws are offered at cost effective prices. Features: Customized solution Rigid construction Flawless
Best Deals from Screws
Wood Screws
Get Price Quote
Drill Bit
Get Price Quote
Self Drilling Screw
Get Price Quote
Drill Bit
Get Price Quote
Self Drilling Screw
5 Per Piece
Double Threaded Self Drilling Screw
Get Price Quote
PTA Self-Drilling Screws (Ruspro)
Get Price Quote
The company stands tall among the successful Manufacturers and Suppliers of PTA Self-Drilling Screws (Ruspro) from Tamil Nadu. PTA Self-Drilling Screws we make available feature various mechanical and dimensional properties and are treated appropriately to obtain optimal performance. The corrosive categories of the environment where these Screws can be used are C2 and C3 classified in accordance with ISO 9223. One can obtain the Screws at affordable rates.Details PTA Ruspro Series screws are coated with at least 25µ of Mech. Galv. Zinc - Tin with 20 - 30% Tin and Balance Zinc. Over and above mechanical plating, two top coatings are given to further enhance corrosion resistance. A PTA screw that has been produced to meet the Australian Standards AS3566 ensures that the screws can be safely used externally in mild, moderate industrial or marine applications. Test Result When tested in a neutral salt spray in accordance with AS2331.1.3 for 1000 hrs red rust not present over more than 3 % of the significant areas of the screws and no blistering of the coating. When tested in a condensing atmosphere containing sulfur dioxide at level SFW 2.05 in accordance with DIN 50018 for 15 cycles of Kesternich test red rust not present over more than 2% of the significant areas of the screws and no blistering of the coating. When corrosion resistant PTA self-drilling screws are tested in an atmosphere of 100 percent relative humidity exposure in accordance with ASTM D2247 for 1000 hrs there is no blister density of 1 or greater. When corrosion resistant self-drilling screws are exposed to alternating ultraviolet and water with a test cycle of 4 hrs ultraviolet radiation of 60' C and 4 hrs of condensation at 50'C in accordance with ASTM G154 for 2000 hrs there is no checking, cracking, flaking or peeling, respectively.
hex head self drilling screw
Get Price Quote
Hex washer head assembled with EPDM washer for safe sealing and long life Surface hardened with additional carbon (C-1022 steel) Thread Count (tpi: threads per inch) as per international standards Conforms to ANSI (American National Standards Institute) quality control standards SAE J78-2013
SS Slotted Head Wood Screw / SS shaved Head Wood Screw
Get Price Quote
We are leading traders and suppliers of ss wood screw. These highly quality screw are developed to the expectation level of clients, thus satisfying clients at maximum level. As quality and durable consistent performance being of prime importance, these ss screws are perfect to be used on wooden bases on window frames, door frames and other such uses. features: · corrosion resistive finish · heat resistance finish · pressure resistance finishh material: ss 304 grade ss 202 grade dimesnion as per din 97 also know as ss slotted head wood screw ss shaved head wood screw
Chipboard Screw
500 Per Box of 1000 piece
Drill Bit
1,780 Per Piece
10 Piece (MOQ)
Self Drilling Screw
Get Price Quote
xylan/ruspert coated & zinc/gi coated/ made of ultra tough carbon steel c1022/ corrsion resistend/ assembled with epdm washer
Brass Screw
160 Per Pack
20 Pack (MOQ)
Wood Screws
Get Price Quote
We are Offering a Metal Screw with a Sharp Point Designed to Attach Two Pieces of Wood Together. Wood Screws are Commonly Available with Flat, Pan or Oval-heads. a Wood Screw Generally Has a Partially Unthreaded Shank Below the Head. the Unthreaded Portion of the Shank is Designed to Slide Through the Top Board (closest to the Screw Head) So that It Can Be Pulled Tight to the Board It is Being Attached To.
Hexagonal Head Screw
Get Price Quote
Mild steel fasteners are widely used for all general purposes where high strength and corrosion resistance is not required. Their low cost makes them ideal for everyday use. Mild steel Bolts and Screws conform to grades 4.6 and 4.8 and Nuts to grade 4. Higher grades of 5.6 and 5 are also arranged against order. Finishes: Self colour, Zinc plated (with White/Blue/Yellow passivation), Hot Dip galvanised, Cadmium Plated, Blackened, Nickle plated and Chromium Plated. Products and available Size Range Hexagonal Head Bolts and Screws M3 X 6MM to M48 X 300 generally conforming to IS 1363(Part 1 & 2) 2002 3/16” X 1/2” to 2” X 12” in BSW threads generally conforming to BS 916 Hexagonal Full and Lock (Thin) Nuts M2 to M60 generally conforming to IS 1363(Part 3)2002 (Hex Nut) and to IS 1364(Part 4)2003 (Lock (Thin) Nut) 1/8” to 2” in BSW threadsgenerally conforming to BS 916 1/2” to 3” in BSP threadsgenerally conforming to IS 3468-1991 Left hand thread nuts 1/4" to 1" in BSW threads M6 to M24 in MM threads Square Head Bolts & Nuts M5 to M12generally conforming to IS 2585-2006 1/8” to 1/2” in BSW threads Dom Nuts M6 to M24 Flange (Collar) Bolts and nuts M6 x 12 to M10 x 25mm Eye Bolts and Eye nuts Lifting Hooks M8 to M48 Eye Bolt (Small Eye) M8 x 40 to M24 x 200 Eye Nuts M12 to M 20 Slotted and Castle Nuts M10 to M48 generally conforming to IS 2232-1967 3/8" to 2" in BSW threads Nyloc Nuts M3 to M48 generally conforming to IS7002-2005 1/4" to 1" in BSW, UNC, UNF and BSF threads. Wing Nuts (Cast Iron) M6 to M16 1/4" to 5/8" in BSW threads Studs M6 x 25mm to M20 x 100mm 1/4" x 1" to 3/4" x 4" Snap Head Rivets 6 x 12mm to 24 x 100mm generally conforming to IS 1929/1982 and IS 2155/1982 1/4" x 1/2" to 1" x 4" Carriage Bolts 1/4" x 1 1/2" to 1/2" to 12" Special C.P. Carriage bolts with Nut and Washers 1/4" x 1 1/2" to 3" (for C.P.Aldrops) Plain Washers 3mm to 64mm generally conforming to IS 2016/67 1/8" to 2" Taper Washers 12mm to 24mm U Bolts Suitable for pipe sizes of 3/4" to 12" with bolt dia of 8mm to 12mm Pipe Bolts 5/16" x 3" to 7" suitable for pipes of 1" to 2" J & L Bolts 5/16" x 3" to 7" GI Threaded Rods M6 to M20 in 1Mtr & 2Mtr length Connecter (Long) Nut M6 to M16 USEFUL FORMULAE Kilograms of Nuts required for 50 kgs of Bolt with Nut = No. of Bolts per Kg X 50 No. of Bolts per Kg + No. of Nuts per Kg Kilograms of Bolts required for 50 kgs of Bolt with Nut = No. of Nuts per Kg X 50 No. of Bolts per Kg + No. of Nuts per Kg Approx Weight of one plain round washer = {(OD x OD x thickness) - (ID x ID x thickness)} 160000
Self Drilling Screw
Get Price Quote
Screws
Get Price Quote
We supply all types of Screws in varying shapes and sizes. The screws we supply are suitable for heavy machinery, home appliances, wooden furniture, etc.
Self Tapping Screw
Get Price Quote
Varieties:- A available in different sizes, head style ,head recess, threads & point for varied application such as for roofing sheets , air ventilators, wood and synthetic wood . FEATURES:- Very well electroplated Heat treatment at required temperatures Life time rust free as screw with SS 304 Head available. Very well engineering with regards to threading, pinch point head & hardness. EPDM washer which is weather , oil & heat resistant
Allen Cap Screws
Get Price Quote
We Offer Allen Cap Screws - Imported Taiwan / China Brand Allen Cap Screws, Allen Button Head Screws, Allen Grub Screws, Allen CSK Screws.
Grub Screws
Get Price Quote
We are offering grub screws .
Allen Cap
Get Price Quote
Self Drilling Screw
320 Per Box
Nitrided Twin Screws
Get Price Quote
Truss Self Drilling Screw
2 Per
Counter Sunk
Get Price Quote
A Counter Sunk Screw is used to be placed into countersunk holes. A counterunk is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A countersunk may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges. A countersunk may be used in many tools, such as drills, drill presses, milling machines, and lathes.
allen screw
Get Price Quote
allen screw
Self Drilling Screw
Get Price Quote
We are Offering Self Drilling Screw. All Sizes of Hex Head Self Drilling Silver Coating Gi with Epdm Washer
Button head cap screw
6 Per Piece