Water Bath Dealers in Chennai (44 products available)

• Brand Name: KitVA
• Material: Mild Steel, Stainless Steel,Outer MS with Powder Coating, Inner SS
• Country of Origin: India

Utilisations include warming of reagents, melting of substrates or incubation of cell cultures. It is also used to enable certain chemical reactions to occur at high temperature. Water baths are preferred heat sources for heating flammable chemicals, as their lack of open flame prevents ignition.

• Max Temperature: Upto 90 deg c
• Accuracy: +/-1 deg c
• Immersion heater: Provided
• Mains power: 220-240 v single phase a/c
• Material for Construction: Stainless steel
• Power Source: Electric

Double walled chamber, fully stainless steel. The interspace between the walls is tightly packed with special grade glasswool to eliminate radiation heat loss to the minimum. Pyramid shaped  cover fitted with plastic knob is provided .A drain plug is fitted to drain out used water and easy cleaning of inner chamber. The inner chamber is fitted with immersion type heating element and covered with perforated removable diffuser tray. The Temperature is controlled by thermostat.

• Type: Water Bath
• Material: Carbon Steel, Mild Steel, Stainless Steel, Steel
• Shape: Rectangular, Square
• Certification: ISO 9001-2008 Certified
• Application: Bath
• Color: Grey, Silver
• Voltage: 220V
• Condition: New
• Driven Type: Electric
• Warranty: 1year

• Material: Metal, Steel
• Style: Modern
• Application: LAB
• Feature: Attractive Designs, High Strength, Quality Tested, Stylish
• Pattern: Plain
• Condition: New
• Finishing: Polished

Double walled chamber, inner made of thick stainless steel sheets and outer made of mild steel sheets duly finished in powder coating. Glass Window provided in the front side for an easy inside view. 

• Material: Stainless Steel
• Phase: Single Phase
• Power Supply: 230V A.C 50 Hz
• Temp. Range: 5º C to 99º C
• Surface: Mild Steel coated
• Accuracy: 1º C

A water bath is laboratory equipment it contains a pan of headwater. It is used to maintain a constant temperature over a long time. the water bath is mainly used to store highly flammable chemicals instead of open flame A water bath is made up of insulating material like stainless steel or glass with insulating or without the insulating lid. It has temperature control system to set temperature limit by using analog or digital system an indicator light is combined with the safety controller once water bath reaches its heat limit. Water bath on and off to maintain constant temperature We manufacture and service equipment like Thermocouples, Industrial oven, industrial furnaces, industrial heating elements, ceramic wares, electronic temperature controllers, industrial lab equipment. We supply products across the world and our customers span into several geographies. Quality is our prime objective and our reputation in the industry stands as a testimony to our technical proficiency, performance, and capability. Our personnel is best in the industry with extensive experience, thorough knowledge, unmatched dedication, hard work and great attitude. Our infrastructure comprises state of the art machinery, inspection equipment, modern tools and gadgets that improve productivity, reduce time, minimize effort and increase deliverability. Our clientele spanning across the world has been patronizing us for decades due to our timely delivery, quality, service support, process efficiency and reliability. KSM lab equipment manufacturers in chennai stands as one of the major manufacturers of electronic temperature controllers in Chennai with a variety of products in our portfolio. They come in different shapes, specifications, sizes, and configurations.Our quality stands best in the industry and we have customers all over the world.    

• Type: Water Bath
• Material: Carbon Steel, Mild Steel, Stainless Steel, Steel
• Shape: Rectangular
• Certification: ISO 9001-2008 Certified
• Application: Bath
• Color: Grey, Silver
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 1year, 2years

• Warranty: 12 months
• Brand Name: TSI
• Country of Origin: Made in India
• Voltage: 220 V
• Frequency: 50-60 Hz
• Automation Grade: Semi-Automatic
• Model: TSI-WB-3
• Power Source: Electric
• Features: Rigid construction, High strength, Dimensional accuracy

A water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. Water baths are widely used for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests and procedures in variety of research and testing laboratories. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various test areas.   Salient Features: Versatile usage Ergonomic Design Energy Efficient Long life Low Maintenance Calibration And Protocol Documentation PID temperature controller Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents. Energy Efficient – the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving. Sturdy Construction – the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

We offer Thermostatic Water Bath, whose general use is in laboratories, industries, educational institutions and quality control departments. They are highly useful in carrying out tests on viscosity, conductivity etc. The Stainless Steel Thermostatic Water Bath we manufacture are built from the finest quality of raw material thus ensuring better performance and extended life. Our quality control department ensures the standard of quality at every step. We have earned illustrious reputation in over years as country�s leading Cylindrical Thermostatic Water Bath Suppliers. Description Made out of glass tank/ SS tank/ insulated SS tank of 18 lit cap. they use either FHP motor driven stirrer or pump cum stirrer unit to keep the bath liquid in constant and uniform temperature throughout its volume. The silent running pump unit is designed for external circulation. The control unit comprises of thyrister based proportional digital indicator control with PT 100 series. There are two heaters of 500 W each one acts as booster and the other as thermostat heater. Tank volume 18 lit. Dimension 300mm dia x 300mm ht. Temperature range 5C above ambient to 90C. Accuracy to temp control better than 0.05C within tank Max power consumption 1500 W mains 230V 50Hz AC

• Voltage: 240 V
• Power: 450W
• Capacity: 30 Litre
• Current: 20 mA
• Accuracy: +-5%
• Operating Humidity: 79%
• Outer Material: Mild Steel
• Inner Material: Stainless Steel
• Weight: 180 kg
• Phase: Single Phase
• Chamber Size: 300x250x100 mm
• Temperature Accuracy: +1 Degree Celsius

• Chamber size: 300 x 250 x 100 mm(6 holes of Ø 75 mm)

Digiqual systems is an Laboratory Bath made,supplier and exporter in India offer custom Laboratory Water Bath solutions and also supplies its Laboratory Water bath all over the world at wholesale price. We are specialised in 6 Hole Water bath, 12 Hole Water bath, Constant Temperature Water bath, Serological Water Bath , Vertical Auto Clave, Oil bath e.t.c.

Tray Size: 270mm x 270mm Temperature range    : 10°C above ambient to 60°C / 10°C to 60°C. Technical specifications Model: Table top. Temperature Controller Digital Microprocessor based PID temperature indicator cum controller with 0.1°C display resolution. Digital temperature display simultaneously shows set temperature and actual temperature. Temperature controlling accuracy:  ± 0.5°C. Display accuracy ±0.5%, full scale. Shaking Speed Accuracy of shaking speed:  + 5% RPM Indicator cum controller 50 – 250 rpm. Digital timer. Construction Inner tank made of Stainless steel 304 grade, duly polished. Outer made of Mild steel with powder coated. Provided 50ml / 100ml / 250ml / 500ml / 1000ml Lotus clamps to hold conical flasks. PUF / Glass wool insulation. Refrigeration System CFC free refrigeration system with hermetically sealed compressor. Fin and tube, air cooled condenser.

• Temperature Sensor: PT100
• Brand: Labman
• Temperature Range: -20 Degree C to 100 Degree C
• Temperature Display resolution: 0.01 Degree C
• Temperature Control: Microprocessor PID
• Display: LCD
• Refrigeration: Air Cooled Refrigeration Through Compressor
• Refrigerant: R-134a
• Pump Flow Rate: 6 L /min
• Tank Size: 240 x 250 x 200 mm
• Bath Opening: 235 x 160 mm
• Power Requirements: AC 220V / 50Hz
• Weight: 50 kg

Double walled chamber, Inner chamber made of stainless steel sheets and outer made of mild steel sheet duly finished in powder coating. Glass window provided in the front side for an easy inside view. Inter space in between two walls tightly packed with special grade glass wool. Top lid is made of stainless steel plate and provided with handle. Heating elements are chromium plated immersion type. Temperature controlled by a digital temperature controller. A high speed stirrer with 120HP motor is fitted to the unit for continuous stirring and thus maintaining uniform temperature throughout. Built in control panel accommodates indicating lamps, ONOFF switch, speed regulator to work on 220230volts AC supply.

Shaking Water Baths (also Known As Reciprocating Water Baths), Are Designed To Handle A Wide Variety Of Applications. These Baths Can Be Used Effectively In Molecular Biology Protocols (such As Hybridization), Bacterial Culturing, As Well As In Solubility And Metabolism Studies. The MRC Models WS17 And WS27 Reciprocating Water Baths Are Designed To Deliver Precise Temperature Control And A Smooth Reciprocal Shaking Motion. 

Inner ss. 304, outer m.s powder coated surface. Refrigeration by ‘Kirloskar copeland’ (eco friendly) compressor. Temperature control by digital control by digital controller. Accuracy + 0.5◦C. ‘puf’ insulation is provided. Unit will have stirrer for uniform temperature.

We bring forth Water Bath, which are known for its durability and functionality. Our Water Bath is used widely in various labs and industries due to its great performance. We have used the latest technology and optimum quality raw material to manufacture our Water Bath equipment. We make our Laboratory Water Bath available at affordable market price to the clients. Salient FeaturesDouble wall constructionInner made of stainless steelQuality Hooters (available in varied dimensions)Generate 3 types of tones (as per the choice)DurableEasy to operateLong functional life Used InResearch centersScientific institutionsHospitalsPharmaceutical industriesOil Industries (Petro Products)

Kinematic Viscosity bath:Full visibility, high precision, Meant primarily for viscosity determination stainless steel tank, Aluminium housing. Toughend glass windows, control of temperature by sensitive Digital temp. ind. Cum controller with P.D. action. Continously variable 500 watts heater for greater accuracy. Booster heaters cut off automatically when not required. Stirrer/Pump to provide gentle yet through agitation circulation of tank media.TEMPERATURE RANGE 5`C ABOVE AMBINENT TO 120`C.ACCURACY OF TEMPERATURE CONTROL +/- 0.1`CMains 230 V 50 HZ A.C.  

The Circulating Water Bath should be used with the 2117-004 Multiphor II electrophoresis units and the CWP-2000 Programmable Power Supply.

Specifications Double Walled Outer - M. S. Double Walled Inner - S. S. Temprature - Ambient to 1100C Insulation - Glass Wool Inner Size - 6 Holes : 30 X 25 X 10CM / 1500 Watts & 12 Holes : 40 X 30 X 10CM / 2000 Watts Energy Regulator - Extra Cost Thermostat - Extra Cost Single Walled Rectangular Made of Stainless Steel Inner Size of 6 Holes : 30 x 25 x 10 Cm 1500 Watts Inner Size of 12 Holes : 40 x 30 x 10 Cm 2000 Watts

Technico CWB is a double walled chamber, inner made of stainless steel of 304 grade and outer made of thick gauge cold rolled mild steel sheets and attractively finished in powder coat paint. The inter space in between the walls is tightly packed with puff to avoid thermal losses. The chamber is provided with top opening lid made of stainless steel and provided with handle. Evaporating coils are kept inside the inner chamber for faster cooling. The refrigeration system consisting of compressor, air- cooled condenser and accessories is provided at the lower portion of the bath. The temperature is controlled by Digit ON /OFF temperature controller with an accuracy of 2 ° C. (The unit is fitted with a stirrer to re- circulate liquid in the tank to maintain uniform temperature inside the bath.) A FHP circulating pump to re- circulate liquid in the tank to an external source is also provided. Built in control panel with indicator lights, ON / OFF switches, Digital ON/OFF controller etc. and is provided on the top portion of bath for operational convenience.   Optional - Stirrer Capacity (ltrs) Chamber size Rating (kw) 12 200 x 220 x260 1.5 28 300 x 360 x 300 2.0 40 370 x 300 x 400 3.0  

The thermostatic water bath we offer are widely used in various industries for their host of qualitative features such as durability, high performance and sturdy construction.

  Novel double walled structure effectively prevents vapor leakage Intelligent temperature controller with PID program Digital display and touch operating buttons Function of timing and over temperature protection Stainless Steel inner chamber   Applications : The equipment applies to Medical Unit, college, Scientific Research Institution and The Department of Chemical Printing, Dyeing, Pharmacy, Petroleum and Electronic Component Production for the use of evaporation, concentration and constant temperature heating.  

• Power: 700W
• Brand: Bunsen
• Ref: 1602
• Capacity: 5 Litre
• Weight: 4 Kg
• Useful measures (W x H x D): 290 x 150 x 140mm
• Ext. measures (W x H x D): 370 x 200 x 280mm
• Max. Temperature: 120 Degree Celsius
• Stability: +/- 1 Degree Celsius

• Temperature Range: 5 Deg C ambient to 90 Deg. C
• Voltage: 230 V
• Material: SS, MS
• Finish: Powder coated
• Size: 350 x 250 x 100mm (6 Holes)
• Automation Grade: Semi-Automatic
• Capacity: 6 holes

We are reckoned as one of the most prominent laboratory Water Bath exporters and suppliers from India. The structure of hot water bath is simple that makes it user friendly. The customers are also facilitated with electric water bath that have different capacity to hold water. Besides this, the consumption of electricity is low and the performance is unquestionable. Specification Double Walled Outer : M. S. Double Walled Inner : S. S. Temprature : Ambient to 1100C Inner Size : 6 Holes : 30 X 25 X 10CM / 1500 Watts & 12 Holes : 40 X 30 X 10CM / 2000 Watts Energy Regulator : Extra Cost Thermostat : Extra Cost Single Walled Rectangular Made of Stainless Steel Inner Size of 6 Holes : 30 x 25 x 10 Cm 1500 Watts Inner Size of 12 Holes : 40 x 30 x 10 Cm 2000 Watts

• Material: Mild Steel
• Application: Heating With Shaking
• Voltage: 230V
• Brand Name: Everflow
• Shape: Rectangular
• Capacity: 25 Litres
• Temperature Range: Above Room temperature to 70deg C.
• platform Size:  275 X 275 X 150 mm

 “MIGHTY INSTRUMENTS” Serological Water bath are versatile enough to handle any clinical procedure, Incubation, Inactivation, Agglutination, as well as most serological pharmaceutical, biomedical procedure. Optional   Accessories: Stirrer With 1/20hp Motor with SS rod and blade Microprocessor Digital Controller

Thermostatic Water Bath, Chilled Water Circulator, scientific instrument

Thermostatic Water Bath, Scientific Instruments, Dryers, freezers, Baths