Belt Driven Ring Blower
Type : Belt Driven Blowers
Material : Metal
Application : Industrial
Color : Blue
Automatic Grade : Semi Automatic
Country of Origin : India
Brand Name : Cleantek
Ring Blower
Rated Voltage : 220-240V
Rated Power : 370W
Power Source : 370W
Material : Metal
Use : Industrial
Maximum Pressure : : 670 Mbar
Maximum Vacuum : : 460 Mbar
Features Rugged & Reliable: The impeller shaft and casing are Aluminum cast. Side Channel Blowers are built tough for continuous 24-hour operation. Minimal Lubrication Required: The rotating parts of Industrial Ring Vacuum Blowers are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. Only the bearings need occasional lubrication after many hours of operation. Low Noise Level: These are direct drive units with integral silencers, which ensures low noise levels. ConstructionDynavac Side Channel Blowershave low-noise, high-efficiency, class F insulated CE certified induction motors. Our ring blowers are made from cast aluminum alloy, and are corrosion resistant. They are suitable for the most demanding applications. The bearings used in our blowers are Japanese NSK bearings.Operation Industrial Ring blowers are manufactured for both pressure and vacuum service. When a ring blower is used for pressure, it is usually configured for use as air supply units or compressors, while vacuum blowers are frequently used as vacuum pumps or fume/dust exhausters. All regenerative ring blowers consist of an impeller that spins within a housing. This housing contains both an intake channel and an outboard channel; hence the name side channel blowers. When the impeller moves past the intake port, air is drawn in and trapped between the impeller blades. As the impeller continues to turn, the air is pushed both inward and outward through both channels, and this process continues until the impeller stops rotating. It is this regenerative process that allows the side channel blower to function as both a pressure blower and a vacuum blower. While the air trapped between two impeller blades represents only a small pressure increase, the sum total of the blades, from intake to outlet, is capable of powerful continuous operating pressures. Maintenance Cleaning - When dust or residue is evident, clean the entire surface of the ring blower Lubrication - After approximately 20,000 hours of operation or 18 months, replace the grease in the bearings Below are some of the applications of Industrial Ring Blowers / Side Channel Blowers. Aeration Effluent treatment plant (ETP) Sewage treatment plant (STP) Aquaculture Pneumatic conveying Automatic looms Automatic bottling machines Vacuum table Plating tank agitation Hopper agitation Jacuzzis Dental and other medical suction Industrial sewing machine Sock loom Furnace air intake
Ring Blower
90,000 Per 0
Voltage : 220V, 380V
Condition : New
Automatic Grade : Automatic, Manual
Power : 1-3kw, 3-6kw, 6-9kw
Driven Type : Electric
Warranty : 1year
Country of Origin : India
Condition : New
MOQ : 1
Starts from 0.5 HP
Ring Blower
12,000 Per Piece
1 Piece (MOQ)
Power : 0.5 HP
Voltage : 230 V
Brand Name : Dynavac
Features : Maintenance free blower, Low noise level , Compact and Rugged, High pressure, High air flow , No vibration , Easy installation.
Blower Type : Ring Blower
Usage/Application : Industrial
Model Name/Number : RB SP 0.5
Weight : 14 kg
Air Flow Rate : 42 m3/hr
Noise : 67 Db
Power Source : Electric Blower
Pressure : High Pressure
:
ring blowers
Ring Blower is used in all those applications requiring an operating vacuum higher than the one achievable by a centrifugal blowers; but not as to require the use of vacuum pump. The rotation parts are not in contact with the casing. Therefore, there is no friction during operation and, thus no internal lubrication is necessary. Air moving through the blower therefore remains uncontaminated and is completely oil-free air. We offer Ring Type Blower in different specifications. Features Higher pressure ratio Maintenance free blower 100% oil-free air Low Noise Level (65dba Normal, ) 140% overload protection ±10% Voltage fluctuation tolerance Rated for continuous duty IP 54 protection Class F insulation CE approved Pressure die casted body, impeller & rotar Low temperature rise Easy installation in vertical or horizontal position No, vibration, and therefore complete dynamic stability Pulsation- free discharge Cooler running, double sealed NSK (Japan) bearings Bearing are packed with high temperature grease for longer life Provided with inlet and outlet silencer/ filter Compact yet rugged Aesthetically Appealing Minimal & simple maintenance Suitable for environmental protection
Ring Blower
In a Ring Blower air enters by means of inlet port and accelerated with the help of an impeller. By means of a centrifugal force this air is thrown next to the wall of the casing where it is reflected back to the base of the aluminum impeller blades and the procedure keeps repeating many times. Ring blower are specifically used in the food manufacturing machine, gilding tank, absorption backing machine, milking machine for the stock raising use, fermentation device, stirring machine etc. Apart from traditions use Ring Blower also finds various applications in the industrial world like: Used as an Industrial vacuum cleaner Used as an vacuum hold for vacuum lifting & Hold Down Pneumatic Conveying system Dental suction unit Synthetic resin- Cubical transfer of the powder, hopper loader and frame seal Blow off or drying application Since the year of establishment CLEANTEK has been one of the most prominent supplier of Ring Blower in India. In our own R&D department our team continuously works on better and more innovative designs. This help CLEANTEK to provide our customers with the most advanced and highest in quality products as per their expectations. CLEANTEK is also an ISO 9001-2008 company. Specifications: Best in quality raw materials are used in manufacturing of the Ring Blower to meet quality standards Motor is protected by maintenance free shaft seal along with fully copper winding Available in 230V / 50Hz and 415V / 50Hz Wooden crates are used as packaging material for safe and feasible supply or export Have AutoCAD 2017 & Solid works license IP55 protection as well as external bearing for increased life CAD (Computer-Aided Design)/CAM (Computer-Aided Manufacturing) are used for precise manufacturing Features: External Bearing increase life Direct drive Induction Motor Powerful Vacuum Low maintenance Motor protected by maintenance free shaft seal High efficiency diecast impeller fans Industrial quality IP55 Protection Motor Fully Copper Winding Compact in size Available in 230 V / 50 Hz and 415 V / 50 Hz also in 60 Hz These ring blowers find applications in following field : Water treatment plant Candy manufacturing Fish Aeration Printing machine Gas Furnace Knitting machine Pneumatic conveying Vacuum Lifting & Hold Down Dust collection Air Knife systems Plating equipments Parts Drying Chemical & plating tank agitation Paper trim removal.
Ring Blowers For Biofloc
Side Channel Blowers Ring Blowers Regenerative Blowers