Tube Heat Exchanger Dealers in Madukkarai, Coimbatore (20 products available)

A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. We are a dependable Manufacturer, Supplier and Exporter of Shell & Tube Heat Exchanger. Also, these Shell & Tube Heat Exchangers are designed as per the leading-edge technology. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Shell & Tube Heat Exchanger, which we offer, can be operated within a temperature range of -40oC to 150oC on either side. However, differential temperature should not exceed 120oC at any point. All the Shell and Heat exchangers can be use pre-dominantly under full vacuum, provided differential pressure does not exceed 3 bar g. Details Type: Fixed Tube Sheet, Removable tube Bundle, U-Tube, Coil in Tank, double PipeCapacity Range : As per Customer requirementShell Diameter : 4� to 125�Tube Length : 3� to 40�Tubes : Plain, Integrally Finned or U-TubeNo of Passes: Single, Double & Four passesM.O.C. Tubes : Carbon Steel, Stainless Steel, Copper, Adm. Brass, Aluminium, Titanium, Tantalum, Hastolloy, Aluminium Bronze, Monel, Duplex, CupronickleShell : Carbon Steel, Stainless Steel, Copper, Monel. Brass, AluminiumChannels : Carbon Steel, Stainless Steel, Gun Metal, Cast Iron, Brass, Cast Aluminium, Alloy Technical Information : All the Shell & Tube Heat Exchanger are constructed with 12 mm OD, 1.5 mm thick glass tubes. These tubes are arranged in triangular pitch of 21 mm. Baffles are provided with 30% cut at a distance of approximately equal to inner diameter of shell. Generally, PTFE baffles are used in Glass shells and PP baffles in Metal Shells. Our Applications DG set for all capacitySpace heatingRefrigerationAir conditioning Power plantsChemical plantsPetrochemical plantsPetroleum refineriesNatural gas processingSewage treatment

Removable Tube Sheet heat exchanger in India and all types of Industrial Heat Exchanger India located in coimbatore south India. Established in 1989 to manufacture and export all types of industrial heat exchanger in INDIA. Our team have a wonderfull wide knowledge and well experienced in deciding the design as per your requirements. We are the leading Removable Tube Sheet Heat Exchanger Manufacturer in India.   Advantages of Removable Tube Sheet Heat Exchanger Easy inspection or replacement Provides multi-tube-pass arrangements. Less costly Tube bundle can be cleaned manually or chemically Provides maximum heat transfer surface per given shell and tube size. Accommodates high temperature differentials   Easy inspection or replacement Provides multi-tube-pass arrangements. Less costly Tube bundle can be cleaned manually or chemically Provides maximum heat transfer surface per given shell and tube size. Accommodates high temperature differentials

• Brand Name: JC Brand

Dear sirmadam, greetings for the day… we jc equipments pvt ltd take pleasure to introduce ourselves as one of the leading designers, manufacturers & exporting of all kind of cooling towers,heat exchangers pressure vessels columns, storage tanks, air cooled condensers, etc.. In india. Jc equipments pvt ltd started in the year of 1989. We have wide knowledge in this field and we have regular customers throughout the world. We are authorized manufacturers of asme and we have “u, s & r” stamp certification also. We are corporate member of cti, usa. We are a world class manufacturers and we never compromise in quality. We assure our product will be best quality and competitive price. Herewith we have enclosed the product profile for your kind reference. Kindly refer the attachment. Looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

JC Finned Tube Heat Exchangers are specially designed and developed by our team and for your applications using Europe Technology ie., with Spiral Wound Finned Tubes and also the heat exchangers are extremely efficient in recovery of heat without an supplementary segment change. The types of FTHE are, Stainless Steel, Copper, Brazed, Finned Coil, Aluminium.

C Equipments Pvt Ltd Offer the below types of shell and tube heat exchangers:   JC Fixed Tube Sheet Heat Exchanger JC Removable Tube Bundle Heat Exchanger JC Vertical Shell and Tube Heat Exchanger JC Stainless Steel Shell and Tube Heat Exchanger JC U Tube Bundle Type Heat Exchanger   JC Fixed Tube Sheet Heat Exchanger India We manufacturer of Fixed Tube Sheet heat exchanger in India as per your requirement and as per the market standards. This JC FIxed Tube Sheet heat exchanger is useful for hight pressure and high temperature based applications. Also for chemical industries and all refinery units are using our Fixed Tube shee heat exchanger. This type of heat exchanger is employed where even slightest intermixing of fluids can not be tolerated. The inside tube sheets are fixed as its name implied. JC Removable Type Tube Bundle Heat Exchanger India JC equipments manufacturer Removable type tube bundle heat exchanger in India for the past 23 Years. Experienced designing team and manufacturing team is added strength for our company. Send your requirement and specification to get our best design for your removable type heat exchanger. Its is easy for maintainence ie., cleaning of removable type is quite easy. We use rubber rings to seal the shell side and tube side. JC Vertical Shell and Tube Heat Exchanger We are the leading manufacturers of Vertical Shell and Tube Heat Exchanger in India.A Vertical Shell and Tube Heat Exchanger is the most common type of heat exchanger in all Industries. Mostly used in higher-pressure and Higher Temperature applications. JC Stainless Steel Shell and Tube Heat Exchanger JC Equipment also manufacturer Stainless Steel Shell and Tube Heat Exchanger in India as per your requirements.As name implied the Stainless steel heat exchanger that is composed of stainless steel. Send your details application and requirement to get our best design for your steel type heat exchanger. Shell and Tube Heat Exchanger Design:   JC Equipments Coimbatore India design Shell and Tube Heat Exchangers by two major types. Thermal Design for Shell and Tube Heat Exchanger Mechanical Design for Shell and Tube Heat Exchanger   Shell and Tube Heat Exchanger Application:   During the manufacturing process industries are in need of heat exchangers to transfer or the heat by using many types. The shell and tube heat exchanger is specially design and suites for higher-pressure applications.   Shell and Tube Heat Exchanger for Power Plants – Condensers, Pre Heaters, Waste water treatment Shell and Tube Heat Exchanger for Oil Refineries – Inter cooling Purpose, Re Processing Purpose, Shell and Tube Heat Exchanger for Manufacturing Industries – Oil coolers for Quenching Oil Oil coolers for Lubrication Oil Offshore Industry Water Makers Condensers, Power Plants – Chillers and Water Coolers Food and Dairy Industries, Refrigeration systems, Pulp and Paper Industries, Wine-brewery industry, plastic and Fertilizers Industries   Shell and Tube Heat Exchanger Standards:   We manufacture Shell and Tube Heat Exchanger equipments asper the TEMA [Tubular Exchanger Manufacturers Association] standards, ASTM section(VIII)(unfired pressure vessuls), is-4503, is-6088 standards. And asper bs, din standard's and is 2825 is 6088 codes.   Shell and Tube Heat Exchanger Quality : JC Equipments having its quality control department [QC Control] testing of all its Shell and Tube Heat Exchanger.   Problem and Trouble shooting Shell and Tube Heat Exchanger: JC Equipments are well explained the Trouble shooting of Shell and Tube Heat Exchanger.

We are offering Plate-fin heat exchanger is one of the most efficient compact heat exchanger. The gaps between constitute a fluid layer. A core is made of a great number of layers. The exchanger can be made of one or more cores. The number of plate and fin layers, the size of the plates and fin, the height of the fin and the type of fin are engineered for optimum performance. The core is assembled (stacked) and typically held together by tack welding a weld rod to the top and bottom layer of the core. The stacked core is then placed within a fixture that exerts force on the individual pieces to keep them in contact. The part is then vacuum brazed in an environmentally-controlled room to ensure high quality and reliability. After brazing the core is typically heat treated or aged in order to increase its strength. Manifold ducting and mounting brackets are then welded in place as required, and any required paint or coating can be added.

• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Oil Refineries
• Sizes: 3" to 36" Diameter; 24" to 360" Length (available in 12" Increments)
• Shells: Carbon Steel or Stainless Steel
• Tubes Diameter: 3/8", 5/8", 3/4"
• Baffles: Precision Punched Carbon Steel, Brass, Stainless Steel
• Heads: Channels and Bonnets Available in Steel
• Flow: Available in 1-pass and 2-pass Designs

U-Tube Heat Exchanger can be many variations on the shell and tube design. Typically, the ends of each tube are connected to plenums through holes in tubesheets.  

In nuclear power plants called pressurized water reactors, large heat exchangers called steam generators are two-phase, shell-and-tube heat exchangers which typically have U-tubes. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power. Most shell-and-tube heat exchangers are either 1, 2, or 4 pass designs on the tube side. This refers to the number of times the fluid in the tubes passes through the fluid in the shell. In a single pass heat exchanger, the fluid goes in one end of each tube and out the other. In Offshore Industries, Water Makers are made up of U tube Heat Exchangers. To Maintain the Lower Pressure Drop in High Tube Length.  A tube bundle heat exchanger with baffles is disclosed wherein a tube bundle is housed within an inner casing which is acted upon from both the inside and the outside by a heating medium   A multiple tube bundle heat exchanger includes axially opposite tube plates, a housing, and a plurality of tube bundles disposed between the tube plates. Each of the tube bundles is an independent tube bundle subassembly forming an integral unit having at least one heat exchanger tube with two axial tube ends.

A heat-exchanger system consisting of a bundle of U tubes (hairpin tubes) surrounded by a shell (outer vessel); one fluid flows through the tubes, and the other fluid flows through the shell, around the tubes.Multitherm can duplicate any existing bundle to include dimensions, materials and performance. we can build “U” tube bundles, straight tube “floating” tube bundles, or we can retube fixed tubesheet heat exchangers when the bundles is not removable. multitherm is not locked into any one material. Most bundles tend to be build with copper tubes and steel tubesheets In nuclear power plants called pressurized water reactors, large heat exchangers called steam generators are two-phase, shell-and-tube heat exchangers which typically have U-tubes. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power. Most shell-and-tube heat exchangers are either 1, 2, or 4 pass designs on the tube side.   Specifications : The number of times the fluid in the tubes passes through the fluid in the shell. In a single pass heat exchanger, the fluid goes in one end of each tube and out the other. A tube bundle heat exchanger with baffles is disclosed wherein a tube bundle is housed within an inner casing which is acted upon from both the inside and the outside by a heating medium Applications : The simple design of a shell and tube heat exchanger makes it an ideal cooling solution for a wide variety of applications. One of the most common applications is the cooling of Hydraulic Fluid and oil in engines, transmissions and hydraulic power packs. With the right choice of materials they can also be used to cool or heat other mediums, such as swimming pool water or charge air. Advantages : Advantages of using a heat exchanger is that they are often easy to service. Particularly with models where a floating tube bundle where the tube plates are not welded to the outer shell is available. Fixed tube sheet heat exchangers.

• Weight: upto 20 M.T
• Design: Shell
• Length: upto 20,000 mm
• Pressure: upto 300 Kg/cm3
• Temperature: upto 1000°C
• Tube Plate: Dia upto 4000 mm Thickness upto 100 mm.

Target Equipments design of the shell and tube heat exchanger is quite complex. The tubes used internally are deliberately of various shapes and design to obtain different outcomes. While a few of the tubes may be plain, others may come finned longitudinally or horizontally. Additionally, the tubes can also be of various materials and thermal conductivity. For instance, Target equipments can be designed from carbon steel, stainless steel, cupronickel, copper or brass. Testing Of Heat Exchanger Owing to the complex nature of the shell and tube heat exchangers, regular inspection of the equipment is necessary. This can help to assess the thickness of the tube walls that are prone to pitting, erosion and corrosion over time. The status of the whole bundle of tubes may be charted and assessed through a thorough inspection with the help of a device known as Internal Rotary Inspection System that functions via ultra tonic testing and also has a non-destructive nature Specification     Features Materials we used for Shell :, Copper, Carbon steel, stainless Steel sizes up to 20000 mm,   Tubes Copper, Brass, Cupro-nickel , Carbon Steels in sizes from 6 mm to 50 mm OD, Stainless Steels, Tube Sheets: Carbon Steel, Stainless Steel, Brass etc. Channels and Cover : Carbon Steel, Stainless Steel, Case Iron, Brass etc. Gaskets : Rubber, Compressed Application Chemical, Petrochemical, Fertiliser. Thermal Power plants, Refrigeration Plants, marine Engines, Turbines, Hydraulic Systems, Sugar Machinery .  

Removable Tube Sheet Heat Exchangers to Elliott for all your tube removal needs ranging from tube cutters to tube tuggers to pneumatic hammers.The tube removal process includes several process steps that must be performed with critical sequencing & tolerances. The initial step of our process the Tungsten Inert Gas (TIG) shrinking of the tube to-tube sheet expansion joints (where applicable), which performed with our st&ard plug removal TIG system. Hard rolled & tubes the shrinking process necessary to relieve the radial stress between the tube & tube sheet.

The surface area of the heat exchanger tubing is increased by our extraordinarily designed fins and in turn this increases maximum heat transfer.They are durable, reliable and require less maintenance. Steam or thermic fluid is utilized as hot medium in these exchangers.

FTH is a pressure vessel which cools a circulating fluid within finned tubes by forcing ambient air over the exterior of the tubes. It does not required water. Major Elements of Finnned Tube Heat Exchanger: Tubes, Fins and Fan (Actuating Device for Heat Transfer) Finned Tube Material: The material selection is made as per Process Application, And Cost of Heat Exchangers   We use following materials for Constructions: Carbon Steel, Stainless Steel, Admiralty brass, Copper and Exotic Alloys, Seamless, and Welded Stainless Steels, Seamless, and Welded, 2205 Duplex, Copper Nickel, Admiralty Brass, Titanium.

• Brand Name: gireesh
• a: a

Gireesh shell and tube heat exchanger is the most common type of heat exchanger designs. As its name implies, this type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed by several types of tubes: plain, longitudinally finned, etc. process liquid or gas cooling process or refrigerant vapour or steam condensing process liquid, steam or refrigerant evaporation process heat removal and preheating of feed water thermal energy conservation efforts, heat recovery compressor, turbine and engine cooling, oil and jacket water hydraulic and lube oil cooling

• Size: 4 inch
• Inlet Temperature: 260 Degree Celsius
• Country of Origin: Made in India
• Surface Finish: Polished

A heat exchanger is a device used to transfer heat between one or more fluids . It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. The simple design of a shell and tube heat exchanger makes it an ideal cooling solution for a wide variety of applications. One of the most common applications is the cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs.

• Size: 5 Inches
• Type: Plate Heat Exchangers
• Shape: Round
• Certification: ISO 9001:2008 Certified
• Condition: New

Plate Type Heat Exchanger, skid mounted cooling tower, Rcc Cooling Tower