Aakash International Badli, Delhi

  The India Mark III hand pumps are sturdy and robust pumps, with conventional action lever, that can be installed in shallow to medium-deep wells. The pump is designed for heavy-duty use and can serve village communities of up to 300 people. The configuration of this pump is very similar to the India Mark II, except the down-hole components, which were slightly changed and modified to make the hand pump more suited to village level operation and maintenance, with simpler tools and lesser cost of maintenance. The most decisive modification was the open top cylinder that allows for the removal of the plunger and foot valve without the extraction of the cylinder and rising main.       The pump can be installed in a borehole or a dug well. Maximum recommended the lift for the India Mark III is 30 m. Apart from the standard 63.5 mm configuration, there exists a version with Ø50 mm cylinder size for lifts of up to 50 m. The pump head, handle, water tank, pump stand, and pump rods are made of galvanized steel, rising main of galvanized GI pipe, pump cylinder of cast iron/brass, plunger and foot valve of brass. This pump is not corrosion resistant and this limits its use to areas with suitable water conditions (pH value

Type : Hand Pumps, Water Hand Pumps

Material : Stainless Steel

Certification : CE Certified, ISO 9001:2008

Application : Ground Water

Weight : 30-40kg

Color : Grey

Condition : New

Automatic Grade : Manual

  the india mark ii hand pump, a conventional lever action pump, is one of the largest selling hand pumps across the world. The government of india along with the continuous and considerable efforts of non-governmental, industrial and multilateral organizations in the 1970s developed this mechanically efficient hand pump.the above ground mechanism comprises of the pump head, handle, water tank and stand assemblies, and the below-ground mechanism comprises of riser pipes, connecting rods and cylinder assembly. The pump is designed for heavy-duty use and is capable of serving communities of up to 300 people.   this pump consists of a pump head, pump stand and a handle made of galvanized steel. The downhole components consist of a brass lined cast iron cylinder with a foot valve and a plunger of brass. Since this pump is not corrosion resistant and requires special skills and tools for maintenance along with installation, it is not considered to be a vlom (village level operation and management of maintenance) pump. Thus it cannot be used in areas with aggressive water conditions. The above ground body of the pump is made of welded steel plates and is hot dip galvanized for corrosion resistance. The handlebar is designed to reduce the pumping effort of the user to a minimum since the weight of the connecting rods is counterbalanced. The cylinder has a highly polished brass liner, which ensures a long life of the nitrile rubber pump bucket.  the pump requires a circular operating space of 2m diameter and the operating depth ranged from 25-90m and gives a water output of 900 liters per hour at 40 strokes per minute. The speed might vary, reaching a maximum of 125 strokes per minute but the ideal speed remains 40 strokes per minute. The riser pipes are 32m in diameter and gi, ss, upvc pipe variants are available.

Brand Name : Aakash International

  The force and lift hand pumps manufactured at Aakash International have some distinct features that give them a unique quality and sets them apart from other options available in the market. The pump head is made of hot dip galvanized mild steel, which lends it a corrosion resistant quality. The customers as per their requirements can choose the quality of connecting rods. It comes in three variants- mild steel electroplated and hot galvanized, FRP, and stainless steel. Similarly, the riser pipe is available in galvanized iron, uPVC, and stainless steel variants. The cylinder can be cast iron brass sleeved, uPVC sleeved, made up of stainless steel or brass, depending on the requirement and preference of the customer. The pedestal can either be three-legged, four flanged or round flanged. The water tank comes with an M.S socket and SS socket. Additionally, a standard toolkit is provided along with the product for hassle-free installation and maintenance of the pump, that can be easily done without the need of expert help. A special toolkit for installation and maintenance can also be provided if required. Owing to best quality raw materials sourced from trusted vendors of the market and strict quality control measures along with adherence to industry standards of quality, the products manufactured at Aakash International guarantee 100% customer satisfaction at affordable prices.

Machinery is designed to make people’s lives easier. So it is almost arbitrary that it is designed keeping in mind the ever-dynamic conditions and needs of people. The India Mark II extra deep well hand pump, designed with this thought, is a conventional lever action hand pump designed for lifting water from extra deep sources, i.e. where the static water level is deeper than usual, and eliminates the use of conventional wells. This requires these pumps to be sturdy and strongly built.  The maximum recommended lift for these pumps is 80m. Since the installation and maintenance of these pumps require special skills and tool sets, which exceed the ability of the village caretakers, they are not considered to be VLOM (village level operation and management) pumps. However, specifically trained area mechanics are available to install and maintain these pumps

The deep well hand pump can be installed in bore wells of a diameter of minimum 125mm and the internal diameter of the underground cylinder ranges from 60-65mm. the stroke length ranges from 120-130mm. these hand pumps give a water discharge of 12-15 liters per minute of 40 strokes, and an average of 900-960 liters per hour. The maximum depth of operation of these hand pumps is 30 meters. These pumps are self-priming and do not require routinely maintenance. Also, they are available in different grades and dimensions, which can be customized as per the client requires. This pump has excellent “community management potential” and can be easily installed and repaired by a village caretaker or women, making it popular with small communities. The above ground parts of the pump can be locally manufactured, but the rest of the components require a high degree of manufacturing quality, which is not available around the globe. So in some countries, these components need to be imported. However, imported components require strict quality control and check to increase the lifetime of the hand pump, and considerably reduce wear and tear of parts and disuse due to corrosion.

Type : Hand Pumps, Water Hand Pumps

Material : Stainless Steel

Certification : CE Certified, ISO 9001:2008

Application : Ground Water

Weight : 30-40kg

Color : Brown, Grey

Condition : New

Automatic Grade : Manual

The INDIA Mark II Pump is a conventional lever action handpump and is subject to Indian Standard IS 9301. This pump has a pump head, pump stand and a handle of galvanised steel. The down hole components exist of a brass lined cast iron cylinder with a footvalve and a plunger of brass. The plunger has a double nitrile rubber cup seal, the rising main is a Ø32 mm GI pipe and the pump rods are of galvanised steel with threaded connectors. This pump is not corrosion resistant and should not be used in areas with aggressive water ( pH value < 6.5).

Type : Hand Pumps, Water Hand Pumps

Material : Stainless Steel

Certification : CE Certified, ISO 9001:2008

Application : Ground Water

Weight : 30-40kg

Color : Brown, Grey

Condition : New

Automatic Grade : Manual