Tracking Index
Get Price Quote
Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking
Y Type Strainer
Get Price Quote
Sant Industries (S.I)( SI-PN-16) Series 'Y' - Type Strainers are manufactured in a wide variety of required specifications, Temperature / Pressure Rating & different types to meet specific requirement of Straining application in the Water Line, Oil Field, Steam & Gas Line. etc. These series 'Y' - Type Strainers are available from 20mm upto 400mm Flanged End Connection Only. Technical Characterstics Max. Operating Pressure 10 - 25 Bar Max. Operating Temperature 120°C
Best Deals from Laboratory Apparatus
Breathing Apparatus
18,000 Per Piece
Dr Manual Apparatus
Get Price Quote
1 Piece(s) (MOQ)
With the help of our expert professionals, we have been able to offer a wide range of dr manual apparatus. These products are manufactured in compliance with set medical standards and norms using high-grade raw material and sophisticated technology. Moreover, the apparatus offered by us are strictly checked on various parameters so as to ensure their compliance with international standards and norms. Features: high performance durability low maintenance
Laser Therapy Apparatus
Get Price Quote
1 Piece(s) (MOQ)
We are offering a wide range of Laser Therapy Apparatus. Laser Beam Class: 3B Laser Type : Semiconductor Modes Of Operation : Pulse , Continous upto 50 KHz Wavelength: 650nm & 980nm Power Density: 0.8Wcm2 Beam Surface: 0.25cm2 Energy Within ! Min: 1.2Jcm2
Dr Manual Apparatus
Get Price Quote
1 Piece(s) (MOQ)
We are offering manual apparatus with the help of our expert professionals, we have been able to offer a wide range of dr manual apparatus. These products are manufactured in compliance with set medical standards and norms using high-grade raw material and sophisticated technology. Moreover, the apparatus offered by us are strictly checked on various parameters so as to ensure their compliance with international standards and norms. Features: high performance durability low maintenance
Laboratory Muffle Furnace 1000 Deg. C.
Get Price Quote
We feel proud to introduce themselves as a leading manufacturer, supplier and trader of Laboratory Muffle Furnace 1000 Deg. C. In New Delhi, Delhi, India. * temperature max 1000 °c * working temperature max 900° c. * accuracy ± 1% or better * outer body made by mild steel with epoxy powder coated. * (optional outer body made by stainless steel) * heating from four sides * the furnace can run continuously trouble free. * the furnace is insulated with ceramic fiber blanket of high density for better insulation. * the furnace is quick heating type, light in weight, table mounting type, compact elegant in design. * temperature controlled by digital temperature controller to avoid over heating for long life and trouble free working. * a viewing cap is also provided on the door. * solid state relays provide for low-noise operation * the swing door insulated with ceramic fiber to avoid heat losses from the door. * the control panel is fitted at the top or bottom of the furnace * the apparatus complete with thermocouple, main lead, with power plug. * defined application within the constraints of the operating instructions * to work on 220230volts or 400 440 volts a.c. 3 phase supply. Size : w100 x h100 x d225mm (4x4x9), w125 x h125 x d250mm (5x5x10), w150 x h150 x d300mm (6x6x12), w200 x h200 x d300mm (8x8x12)
Dr Manual Apparatus
Get Price Quote
1 Piece(s) (MOQ)
With the help of our expert professionals, we have been able to offer a wide range of Dr Manual Apparatus. These products are manufactured in compliance with set medical standards and norms using high-grade raw material and sophisticated technology. Moreover, the apparatus offered by us are strictly checked on various parameters so as to ensure their compliance with international standards and norms. Features: High performance Durability Low maintenance
Ductility Testing Apparatus
28,000 Per Piece
Liquid Limit Apparatus
Get Price Quote
The liquid limit device correlates the mechanical properties of the soil such as compressibility and low shear strength. Being a major manufacturer and supplier of liquid limit device, we offer a device that has a brass cup on adjustable brackets with a fall adjustment of 1 cm. The brass cup of the liquid limit device can be raised and dropped through cam action on a rubber base that has standard hardness. Having one casegrande grooving tool as well as one astm grooving tool along with a high gauge block (type a of is 9259), the liquid limit device is a complete setup of its own. Motorized model is also available.
Distillation Apparatus
Get Price Quote
1 Piece(s) (MOQ)
We are offering distillation apparatus. manufacturing high quality products with competitive prices.
California Bearing Ratio Test Apparatus
Get Price Quote
The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.
Mercurial Desk Model BP Apparatus
16 - 16 Per piece
5 Piece (MOQ)
Product Description Model: MCP01 ISO, CE & ISI Mark, NSIC Approved, WHO GMP Mercurial Sphygmomanometer is traditional blood pressure measuring instruments with mercury locking facility, Range 0-300 mm Hg packed in lightweight metal case. Features Easy to read with clear tube Accurate reading Emulsoid Bladder & Soft emulsoid Bulb Mercury lock facility. Measure Scope: 0-300mHg Accuracy: 3mmHg Glass Tube: 3.5 to 4.0mm
Semi Automatic Digital Ring and Ball Apparatus
Get Price Quote
This apparatus is meant for determination of softening point of bituminous materials. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. To determine the temperature at which sample of bituminous material loaded by 9.5mm dia steel ball, drops from a specified distance when heated under specified conditions.
CBR Test Apparatus
Get Price Quote
The company is known as a prominent Manufacturer and Supplier of CBR Test Apparatus. The CBR Test Apparatus can be handy in the determination of the load carrying capacity in the laboratories. The CBR Test Apparatus comes into play in specific conditions where the in-place density and water content are such that the saturation degree is more than or equal to 80%. The material is without cohesion and is basically coarse grained as well.Components : Load frame (hand operated, motorized, single speed motorized, three speed motorized) capacity 50 KN (5000 kg) with high and low rate of travel of the lead screw Mold 150mm internal dia, 175 mm high Penetration piston, face dia 50 mm with adjustable bracket for dial gauge Circular metal spacer disc, 148 mm dia x 47.7 mm high with detachable handle Annular metal weight 2.5 kg, 147 mm dia with 53 mm dia hole Slotted metal weight 2.5 kg, 147 mm dia with 53 mm slot Perforated plate, 148 mm dia with adjustable stem and lock nut brass Metal tripod for dial gauge Cutting collar for obtaining sample from field Rammer 2.6 kg x 310 mm controlled drop through guide Rammer 4.89 kg x 450 mm controlled drop through guide Proving ring 5000 kg, equipped with dial gauge Strain dial gauge least count 0.01 mm x 25 mm travel
Vicat Needle Apparatus with Dashpot
Get Price Quote
Vicat Needle Apparatus With Dashpot Product Description The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles. Accessories: Mild steel base plate 5 inches x 5 inches. Fulcrum mould , brass , 80 mm i.d. base dia x 70 mm i.d. top dia , 40 mm height. Note: Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required.Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc. As per ASTM C 187-58 C 472-62 C 110-58, IS 2542(Part-1) can also be supplied.
Ecg Machine
38,000 Per Piece
Bp Apparatus
Get Price Quote
Die cast body gauge with epoxy powder coated, Easy to read round dial, calibrated upto 300mmHg ±3mmHg, Extra wide Velcro fasteners with extra long cuff.High quality rubber inflating bag and latex free bulb, Precision air release valve
Acupuncture Apparatus
Get Price Quote
According to the Chinese Traditional Medicine (CTM) theory, the body has vital energy called 'Chi' or 'Qi' that flows along main and collateral channels connecting our organs with other parts of the body. According to the CTM theory ?Block causes pain, no block no pain?. A pain on the body always indicates a blocked channel or a shortage of blood and Qi. As per CTM, better blood circulation serves as the key to the rheumatism treatment, as it removes blockages of channels and restores the circulation of blood, thereby relieving pain. Tiens Acu-Life Electro Acupuncture Apparatus uses pain-free method to clear the body channels to relieve pain, heal chronic ailments and prevent diseases. Based on the theories of the CTM main and collateral channels, Acu-Life adopts the electromagnetic wave to acupuncture body acupoints to adjust the channels and clear blockages. As a result, blood, Qi and internal organs stimulate free circulation of blood. While correcting the abnormal conditions of the organs, Acu-Life does not impact the normal physiological functions of the body. This product is easy to operate and safe to use. Product Advantages : Compared with other similar mono-functioning products in the market, Acu-Life has many advantages - Acu-Life effectively focuses on the hand acupoints and adopts the acupuncture treatment principles. Without piercing the skin, Acu-Life uses the electromagnetic wave to bring a healthy and safe effect. With an advanced technology, fashionable look of high quality, Acu-Life is very easy to use. Product Functions and Features? Acupoint probe - Easily and accurately probes the acupoints. (Always use specialized hand point diagram) Channel invigoration - by using electromagnetic wave to stimulate the acupoint and clearing the channels, this product improves blood circulation and metabolism and strengthens the immunity through magnetizing the body fluid. Health care effect - improves the blood circulation,
Ecg Machine
50,000 - 65,000 Per 1
Abel Flash Point Apparatus
Get Price Quote
Digital Bulk Density Apparatus
Get Price Quote
Digital Automatic Tap Density Test Apparatus is designed to meet the requirements of USP Standards. It can hold two cylinders. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test evenly and uniformly together. Body is made of M.S., duly powder coated S.S. body (as per GMP requirement). The user has to select the No. of stokes in the counter & after selecting, just press start switch, it will start the stokes & the Digital display shows the No. of strokes.
Laboratory Muffle Furnace
Get Price Quote
Bionics Scientific is a leading Indian manufacturer of muffle furnaces for laboratory use with temperature range 800°C to 1800°C. As required, we provide both readymade (ready stock) and customized muffle furnace systems to our customers worldwide. These laboratory muffle furnace units are utilized in general purpose heating in laboratories, ashing tests on wool, rubber, fibers or fabrics, heat treatment requirements for gears and various research facilities in chemistry and physics. Temperature Range: To meet unique needs of every application, our muffle furnaces or box furnaces are available in temperature range from 800°C to 1400°C (800°C, 1100°C, 1200°C and 1400°C), in addition, we also design and manufacture high temperature muffle furnace up to 1800°C (1500°C, 1600°C, 1700°C, and 1800°C) Usability & Performance: Usability is one of the major factors that one should look into while buying heating equipment and with Bionics® Muffle Furnace systems you experience unmatched convenient working performance. All our electric muffle furnaces feature rust and corrosion free stainless steel housing, compact and light weight construction and branded heating elements and programmable PID controller, ensure safe operation every time. Safety Features: These systems are microprocessor controlled programmable muffle furnaces that offer easy and safe operation even at high temperature. These systems are designed with your safety in mind. Multi-layered insulation keeps external surfaces (cabinet) cool to the touch. Door safety switch (optional accessory) stops power to heating elements when door is opened. Data Recording In order to keep the record for processing, these units can be optionally fitted with Digital Data Logger, Printer and Temperature Chart Recorder. If you are interest in buying Bionics® Muffle Furnace and need a price list or quotation, please write us an email, our support team will assist you. We are committed to build a healthy business relationship through quality products and services.
Sand Pouring Apparatus
Get Price Quote
It is used for soil testing. It consist of sand pouring cylinder fitted with conical funnel, cylindrical calibrating container 10cm dia. & square tray of 30x30cms with central hole of 10cm dia. Also other size of 15cm dia. & 20cm dia. are available.
Marshall Stability Test Apparatus
Get Price Quote
Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.
Flash Point Apparatus
900 - 1,000 Per Piece
Vicat Needle Apparatus
1,100 - 1,600 Per Piece
1 Piece(s) (MOQ)
The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould. Split type and glass base plate and one set of needles one each initial needles, final
Jolting Apparatus
Get Price Quote
Mercury Free BP Apparatus Stand Model
Get Price Quote
Model: MCP10 ISO, CE Mark, WHO GMP Specification: BP Aparatus Mercury Free LCD Sphygmomanometer: Dual methods Measurement method: Stethoscopy & Oscillography. Automatic result in the form of bar graph. LCD instead of mercury. Display: Liquid crystal digital display to show bar graph for the measurement of BP (Systolic & Diastolic). With Cuff, bulb with end valve. Operated on mains as well as on batteries.
ECG Machines
26,000 Per Piece
1 Piece (MOQ)