Bare Galvalume Sheet Dealers in Delhi (4 products available)

Our Bare Galvalume Roofing Sheet are available in numerous sizes, designs and colors and are in extensively demanded in homes, restaurants, hotels and many other places. Further our quality auditors test this sheet on set parameters to ensure a flawless product from our end and retain customer’s permantantly.Our products are of rugged design, excellent strength, durable and easy to install.The combination of zinc and aluminum in Galvalume which enhances both the positive and negative effects of aluminum. Galvalume has barrier corrosion resistance and heat resistance similar to aluminized material and good bare edge galvanic protection and forming qualities like galvanized material.   Specification of Galvalume Roofing Sheet:   1) Chemical Composition: 55% Aluminum, 43.4% Zinc, 1.6% Silicon 2) Substrate: Galvalume steel sheet & Pre-painted galvalume steel sheet 3) Standard: JIS3321/ASTM A792M 4) Alu-zinc Coating:40/㎡-275/㎡ 5) Galvalume Steel Thickness: 0.47, all available 6) Prepainted Galvalume Steel Thickness: 0.47, all available 7) Aluminum Coating: AZ50/AZ100/AZ150/AZ185 8) Spangle: regular spangle, minimized spangle, zero spangle 9) Surface treatment: Chemical treatment, oil, dry, anti-finger print 10) Features: long-term resistance to atmospheric corrosion, bright surface, paintability, durability and versatility 11) Application: It is used as the wall or roofing of factories, warehouses, garages, exhibition centers, cinemas, etc.  

Thickness : 0.45 mm Base Metal

Aluminium, : 45% Zinc

Supply of non - colour coated galvalume hirib profile sheet of nominal 1015-1020 mm effective cover width and 28-30 mm deep ribs with subtle square fluting in the five pan at nominal 202-205 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) or 0.5mm TCT, Hi-strength steel with minimum 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 — Zincalume AZ150 (Min. 150 gmssq.mt total on both sides). The steel manufacturer's test certificate for the chemical and mechanical properties of steel must be submitted for approval by the engineer-in-charge.