Compaction Factor Apparatus Dealers in Delhi (31 products available)

• Material: Cast Iron
• Application: Concrete Testing
• Voltage: 220V
• Automation Grade: Semi-Automatic
• Brand Name: Steco
• Power: 0.25 To 2 Kw
• Standard: BS 1881-103, BS 5075
• Frequency: 50/60 Hz

Other Details: The compaction factor is defined as the ratio of the mass of the concrete compacted in the compaction factor apparatus to the mass of the fully compacted concrete. It involves dropping a volume of concrete from one hopper to another and measuring the volume of concrete in the final hopper to that of a fully compacted volume. The results of the compaction factor test can be correlated to slump, although the relationship is not linear. This test is difficult to run in the field and is not practical for large aggregates (over 1 inch) Compared to the slump test, the apparatus is bulky and a balance is required to perform measurements. The apparatus, consist of a rigid frame that supports two conical hoppers vertically aligned above each other and mounted above a cylinder. The top hopper is slightly larger than the bottom hopper, while the cylinder is smaller in volume than both hoppers. To perform the test, the top hopper is filled with concrete but not compacted. The door on the bottom of the top hopper is opened and the concrete is allowed to drop into the lower hopper. Once all of the concrete has fallen from the top hopper, the door on the lower hopper is opened to allow the concrete to fall to the bottom cylinder. The excess concrete is carefully struck off the top of the cylinder and the mass of the concrete in the cylinder is recorded. This mass is compared to the mass of fully compacted concrete in the same cylinder achieved with hand rodding or vibration. Complete with trowel and tamping bar 0-60 cms long X 16mm dia. Optional Accessories: Concrete Scoop Straight Edge Weighing Balance

• Finishing: Color Coated
• Material: Mild Steel
• Automation Grade: Manual
• Color: Blue
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Brand Name: Sisco India

Compaction Factor Supply complete with 1· Hoppers ……. 2 no. 2· Receiver ………….. 1 no. 3· Tamping rod 16 mm dia and 60cm long 4· Gauging trowel ……………….1 no, 5. Scoop ………………. 1 no.

• Height: 127.3mm
• Volume: 2250 ml
• Internal Dimeter: 100mm

The apparatus consists one each of compaction mould gun metal/ M.S., 100 mm i. D. X 127. 3 mm height x 1000 cc. Volume, complete with collar and base plate. Rammer 2. 6 kg x 310 mm controlled fall.

• Material: Mild Steel
• Automation Grade: Manual
• Color: Blue
• Brand: Edufirst Enterprises
• Model Name/Number: EDF/IND-CST-13

• Weight: 40-80kg
• Condition: New
• Material: Metal
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Owing to our up-to-date manufacturing unit and experienced engineers, we are proficient in offering the best quality Compaction Factor Apparatus. The Compaction Factor Apparatus is used for determining the workability of fresh concrete. It is designed with two rigid conical hoppers and a cylinder mounted on a rigid metal frame. Our Compaction Factor Apparatus also features tamping rod of 600 mm long x 16 mm dia. Further, the Compaction Factor Apparatus is acclaimed for its easy usage, high reliability and exceptional durability.

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISI Certified
• Color: Blue
• Finishing: Polished
• Warranty: 1 Year

For determination the workability of concrete provided the nominal maximum size of the aggregate does not exceed 38 mm. This is designed primarily for use in the laboratory but in suitable circumstances, it may also be used in the field. This test is more precise and sensitive and is particularly useful to concrete mixes of very low workability such as are normally used when concrete is to be compacted by vibration. Consists of two hoppers and a cylinder mounted on a rigid frame. The inside surfaces are machined smooth. The whole apparatus is furnished in hammertone spray. Complete with two trowels and a tamping  rod.

We offer Compaction Factor Apparatus which are majorly used for determining the functionality of concrete provided. The usefulness of our Compaction Factor Apparatus is not only confined to laboratory purposes, but can also be used in other relevant fields. We offer Compaction Factor Apparatus with an extra smooth inside surface. Features Light weightedWell structuredLow maintenance costsOptimum functionality Components Two hoppersA cylinder mounted on a rigid frame

• Application: Concrete test
• Power: Manual
• Standard: BS 1881-103, BS 5075
• Minimum Order Quantity: 1 Piece

• Material: Mild Steel
• Automation Grade: Manual
• Color: BLUE
• Brand Name: RAJCO
• Country of Origin: Made in India
• Model Name/Number: RSEP 061

Product Code: EKE 337Standrad: IS:5515   A useful tool for workability determination of concrete mixes of very low workability such as those normally used with concrete, compacted by vibration. Concrete Mix having maximum size of aggregate not exceeding 38 mm, can be tested for workability. Apparatus is complete with hoppers and receiver assembly, EKE 345 Tamping Rod of 16 mm dia x 60 cm long, a Hopper and one plasterer's Trowel.

It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trapdoors having a quick release catches. A circular metal plate is provided to cover the top of the cylinder. Supplied complete with one plaster's trowel and one tamping rod, 16 mm dia x 600 mm long, both ends rounded.

The apparatus consists one each of Compaction Mould Gun Metal, 100 mm I.D. x 127.3 mm height x 1000 cc. volume, complete with collar and base plate. Rammer 2.6 kg x 310 mm controlled fall.

• Automation Grade: Manual
• Color: Blue
• Material: Stainless Steel
• Surface Finishing: Paint Coated
• Number Of Buckets: 3
• Model Name/Number: SS-CT-3003
• Usage/Application: Laboratory
• Brand Name: SS Enterprises
• Diameter: 16 mm
• Length: 600 mm

The apparatus consists one each of Compaction Mould Gun Metal, 100 mm I.D. x 127.3 mm height x 1000 cc. volume, complete with collar and base plate. Rammer 2.6 kg x 310 mm controlled fall.  

To determine the fineness of cements, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air permeability methods are used to determine the specific surface as total surface area in cm²/g of material..   IS: 5515A useful tool for workability determination of concrete mixes of very low workability such as those normally used with Concrete, compacted by Vibration. Concrete mix having maximum size of aggregate exceeding 38 mm can be tested for workability. Apparatus is complete with hoppers and receiver assembly SCO-1037 Shrinkage Bar Mould, Single SCE-1038 Shrinkage Bar Mould, Double SCE-1039 Shrinkage Bar Mould, Three