Construction Machine Dealers in Pitampura, Delhi (63 products available)

• Type: Dozer, Loader, Scraper
• Application: Construction Use
• Driven Type: Fuel, Hydraulic, Mechanical, Pneumatic
• Ground Clearance: 400-450mm, 450-500mm

If you are looking for the best construction equipment at an affordable price you can choose Equipment Rentals India. ERI is one of the best options for your services. We are providing an apollo hot mix plant price in India, Hot Mix Plant, Used loader available for sale, loader for rent in India. If you choose us we will give you the best offers at the best price. If you have any query you can contact us. Our services are very popular in all over India. If you have any query you can contact us.

• Driving Method: Manual Push
• Engine Type: Honda GX270 Petrol
• Operation Mass: 90 Kg
• Water Tank Capacity: 35 L
• Depth Adjustment: Handle Rotation
• Engine: Air-cooled,4- cycle,single cylinder
• Blade Size: 12-20 inches
• Model: CQF16
• Power: 5Hp / 9 HP
• Maximum Cutting Depth: 8 inches

Block Ice Machine to meet customer’s freezing requirement. The biggest feature of Automatic Ice Block Machine is; no need salty water for large-scale ice blocks and other cooling medium during the freezing period. When the ice formed, they drop into the special ice contact convey device. The whole course of ice forming is sanitary and clean. Machine adopts the heat gas harvesting ice technology, direct heat expansion, heating exchanging technology, making the product performance better. Containerized type or module type. Wet bulb temperature. Freezing time of 4-8 hours Variable-speed start screw type compressor. Open-ended serpentine coil and evaporative condenser. Air cooled refrigerated system-Air cooled refrigeration system offer various benefits like low fan power consumption resistant to corrosion and freezing conditions requires very low maintenance Guaranteed long life operation Micro-processor based Controller (HMI+PLC as an option) Processing speed is high Provides flexibility to alter the system by changing software. Compact in size. Operation and maintenance easier. Maintain precise values Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the machine to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents. CFC/HCFC-free cooling-The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly. Sturdy Construction-equipment’s are built with robustness to withstand stress and strain, giving the it long life and ability to perform in extreme stress environments. Low Maintenance- WEIBER systems benefit inretaining proper functionality over long period of time.

• Wire Type: 2 Core Jacketed Wire
• Weight: 36 Kg
• Features: High-speed wire cutting & stripping machine for electronic cables, data cables, Shielded cables etc. Specially Designed for 2 Core Round Wires
• MODEL: PRV-CS-PRV-CS-3606
• Power: 50 Hz Single phase AC 220V
• Wire Diameter: 2
• Cutting Length: 1
• Jacket Stripping Length: 0
• Core Stripping Length: 1
• Cutting Speed: 1
• Size: 450 x 450 x 360 mm

It increases the speed of crushing.

• Voltage: 380 V / 3 phase / 50 Hz

Series continuous glass bending ovens is used to bend small medium size of glass. Glass runs continuously from entrance till exit at the other end passing through pre-heating, bending, annealing and cooling sections. This oven is also very suitable for glass bake, glass cook, glass decorating and glass fusing.

MS Round Bars of 32.00,36.00 & 38.00 mm are used to fabricate Adjustable Base Jack with 4 TPI Acme/Square threads. The Base Plate is fabricated out of 150 X 150 X 5 mm MS Flat & malleable cast iron Cup Type Light/Double Handle Heavy Duty Nuts.Sizes available are 350,450,550,600 mm of Bar Length.  

MS round bars of 32.00, 36.00 and 38.00 mm are used to fabricate adjustable base jack with 4 TPI acme square threads. The base plate is fabricated out of 150 x 150 x 6 or 5 mm MS flat and malleable cast iron cup type light double handle duty nut. Sizes available are 350, 450, 550 and 600 mm of bar length.

Description   This is A HOME GYM EZ SOLID 200, Multi Gym BY Deemark Healthcare.  Excellent Design Square & Round Steel Tube Pec Dec Overhead Pully   Lateral Bar Curling Bar Shoulder Pully Low Row   21 Exercises Can Be Done  Colour: Subject To Availability, WEIGHT STACK : 120 LBS 

MEYCO Equipment is the market leader for shotcrete equipment. Their products include wet-spraying and dry-spraying machines, manipulators large and small, complete mobile units and special constructions according to project requirements. MEYCO Equipment also conducts its own research and development. MEYCO is dedicated to sprayed concrete and the improvement of quality in both application and end result.

We provide wide range of adjustable base Jacks manufactured using high quality stainless steel metal. These jacks are available in various shapes and sizes as per the application specific needs of our clients. These are precisely engineered and available in various sizes. Moreover, we have the ability to customize our wide range as per the requirements of our clients at market leading prices.

  Rim Straightener for Cars & LCV's 10 Die Rim Straightener is designed for heavy load workshops. It can quickly repair the bent edges and wobbling of MS Rims with lath/hydraulic action. It adopts heavy duty reduction gear box with thrust bearings to take heavy starting force and eliminate the vibrations during the straightening operation.

• Voltage: 380 V / 3 phase / 50 Hz
• Oven Interior Width: 800 mm
• Outer Dimensions: 30 x 1 x 1.2 m 30 x 1.4 x 1.2 m

Series continuous glass bending ovens is used to bend small medium size of glass. Glass runs continuously from entrance till exit at the other end passing through pre-heating, bending, annealing and cooling sections. This oven is also very suitable for glass bake, glass cook, glass decorating and glass fusing.

For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at rate of 450 to 550 Nminute (45 to 55 kg minute) or 2000 Nminute (200 Kgminute) and the accuracy of load indication is ± 2%. The sample is mounted between rollers 40 mm dia or12 mm dia. Bearing Rollers can be placed at center distance of 150 mm, 200 mm, 250mm or 270mm as the case may be. Complete with 20 Kg lead shots

Boom Placer, concrete pump rental service, Transit Mixer Rental Service

• Mesh Size (inch): 2"

This is made in two shapes square and diamond. The hollow sizes available from 12'' to 6'' in wire thickness from 8 Swg to 16 Swg in Hot Dip Galvanised Iron Wire. As the name suggests its most common application is to provide fencing across boundaries for security. It is also known as Garden fencing. It is mostly manufactured in hot dip Galvanized wire(G..I). For decorative purposes it is also manufactured in PVC coating in different colors. Manufactures in G.I., PVC coated ( Green, Blue Colour) & stainless Steel from 6 swg to 18 swg in any height length width sizes etc.

• Weight: 53 kg
• Model No: SMPL-MH2
• Max pressure: 13T
• Max stroke: 250mm
• Bending capacity: 21.3-60mm (1/2″-2″)
• Bending shoes: 1/2″,3/4″,1″,1 1/4″,1 1/2″,2″
• Pipe wall thickness: 2.75-4.5mm
• Dimensions: 73 × 32 × 20 cm

concrete cutting machines, core bits, Diamond Blade, diamond chains

Concrete Testing Machine, plastic testing machine, textile fabric testing

Specifications Model No. M025 Diameter of wire 16 to 25 mm Length of wire 150 to 1500 mm Feeding Capacity per min. 40 Ft. HP Power of Motor Required RPM 3 HP 25 HP 1440 RPM Weight approximate 2500 kg

• Condition: New
• Type: Gas Based
• Material: MS
• Tank Capacity: 100 kg

STI-1001 IS: 654, 1237,1706For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at rate of 450 to 550 N/minute (45 to 55 kg minute) or 2000 N/minute (200 Kg/minute) and the accuracy of load indication is ± 2%. The sample is mounted between rollers 40 mm dia or12 mm dia. Bearing Rollers can be placed at center distance of 150 mm, 200 mm, 250mm or 270mm as the case may be. Complete with 20 Kg lead shots Abrasion Testing MachineSTI-1002 IS: 1237, 1706The tile sample is pressed under a specified load against a grinding path, strewn evenly with an abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of the tile is measured using thickness-measuring device (which is supplied at extra cost). The abrasion-testing machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter-balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic preset revolution counter and one 7.5 kg weight, but without abrasive powder and thickness measuring device. Suitable for operation on 220V, 50 Hz, 1 phase, AC Supply. Optional ExtraThickness Measuring Device with Dial Gauge, having 25 mm travel and 0.01 mm least count

• Type: Concrete Polisher Machine
• Weight: 100-1000kg , 1000-2000kg, 2000-4000kg , 4000-6000kg
• Automatic Grade: Automatic , Fully Automatic, Manual , Semi Automatic
• Warrenty: 1year , 2years
• Driven Type: Electric,Hydraulic, Pneumatic
• Condition: New,Old
• Color: Silver, Grey, Black
• Voltage: 110V, 220V, 280V,380V, 440V

• Type: High-Pressure Gun AIR ASSIST
• Usage: Wall Putty Sprayer
• Function: Wet Model Plastering Machine
• Applicable materials: Mortar Cement Water
• Capacity: 9L
• Weight:: 2.5 KG
• Dimension(L*W*H): 20*20*90cm

Service Provided: No overseas service providedKeyword: Cement Mortar Plaster Spraying Machine Gun

Road Construction Equipment, Glass Beads, Road Safety Equipment, Road Studs

canal construction equipment, buildings, Solar Power System

• Type: Adjustable Roller
• Material: Brass, Metal, Plastic, Stainless Steel
• Condition: New
• Load Wearing Capacity: 90 Kg

Our company is counted as one amidst the predominant electrically operated centrifuge machines manufacturers in india. The unmatched quality and unsurpassable performance has attracted various national as well as international clients to place repeated orders for the centrifuge machine. The array also includes hand operated centrifuge machine to meet the specific requirements of the clients. The use of optimum quality materials in the manufacturing of the centrifuge machines ensures high durability tensile strength and resistivity to adverse conditions. Moreover, the centrifuge machines, offered by us, comply with the universally accepted quality standards.

Transit Mixers, concrete pumps, Excavators, Vibrating Roller