Infinite Energy (p) Ltd. Kilokri, Delhi

Wood chipper to chips of uniform size for making paper pulp and charcoal, and for use in wood distilling: Starts conveyor system that feeds wood into hopper of chipping machine. Positions pieces of wood on conveyor, using picaroon to prevent congestion and to regulate flow.

Quantity: 200 tonnes daily Rate: 5,500.00 ex factory Brief description: We produce the finest quality briquette made of pure sawdust. Our briquette composition has 90 % saw dust and 10 % almond shells. We have GCV of 4400 and moisture of 6% and ash content of 2.1 %.

Screw Extruder Press with specially designed die and screw and a drive mechanism. The machine is a rugged piece of equipment with heavy duty body which ensures lesser vibrations. The screw briquettor consists of an intake hopper that delivers the biomass into the feed chamber. The extrusion screw force feeds the biomass in the feed chamber into the preheated die.

Quantity: 20000 tonnes daily Rate: 20,000.00 ex factory Brief description: We are selling coconut shell charcoal briquette in any sizes and shapes, our speciality is making briquette for shisha hookah and barbeque We are producing our own charcoal, 100% coconut shell with professional burning system to maintain the quality of the charcoal • Size 2.5 x 2.5 x 2.5 cm • Size 4.5 x 2.5 x 2.5 cm • Size 2.5 x 2.5 x 1.5 cm • 7000 Calories up • 2 Hours Burning Time • White Ash • Smokeless • Sparkless We are able to customize in any sizes or shapes depends on demand We are looking for overseas and local buyers for coconut shell charcoal briquette please contact us : cvsuperpalma@gmail.com +6281902245046 +6289665045973 Whatsapp & Kakaotalk : +6289665045973 Niko Darmawan Cv. Superpalma Briquette, Indonesia

Pneumatic Conveyor is sucked through the bottom sieve by the pneumatic conveying system and transported to the vicinity of either biomass storage space or the feed screw as per the plant layout requirements. The conveying blower is also mounted on the same shaft as the Hammer mill and hence the space and electric motor requirements are reduced.

Hammer Mill of grinding chamber in which the dry biomass is pulverised by a set of swinging multi edged hammers, a sieve classifier and electrical driving mechanism. The size reduction is achieved by the shattering of the dry biomass by impact from high velocity multi edge hammers. The hammers are swivel mounted on a sturdy shaft which runs on heavy duty bearings. The Sieve classifier is placed at the bottom of the grinding chamber.

Most biomass materials like Wood , Charcoal , Rice Husk etc can be converted into a gaseous fuel known as producer gas, which comprises carbon monoxide, hydrogen, carbon dioxide, methane, and nitrogen. This gas has a lower calorific value (1000–1200 kcalnm3) compared to natural gas or liquefied petroleum gas, but can be burnt directly with high efficiency and good degree of control without emitting smoke. The producer gas flame temperature can be as high as 1100 oC. Each kilogram of air-dry biomass (10% moisture content) yields about 2.5 nm3 of producer gas. In energy terms, the conversion efficiency of the biomass gasifier process is in the range of 80%–90%.

We manufacture wide range of burners to suit any application (fully automatic burners): the production of good quality gas from wood is just one half of the solution. The solution is complete only when an appropriately designed burner is used to burn the gas.

We are offering flash dryer. The drier system is conventional pneumatic flash dryer. The hot gas carries the materials pneumatically and drying would be achieved by intimate mixing of hot gas with the wet material as they travel together in the drier columns.

We have indigenously developed a wide range of fully automatic burners from capacities ranging from 50,000 kcalhr to 10,00,000 kcalhr for burning hot producer-gas which are suitable for almost every type of application. These burners are loaded with all the safety features of conventional automatic burners. We offer single stage, double stage or continuously modulating type burners depending upon the capacity and application. We have a wide range of burners in our range We have four distinct types of burners designed to suit different types of application.

Cyclone Dust collector of the conveying air and the pulverised material is achieved in the high efficiency cyclone dust collector. The material collected at the cyclone bottom hopper would be removed by a rotary air lock valve. This would eliminate the dust pollution at the bottom of the cyclone where the dried material would be discharged.

We are offering biomass gasifiers. The gasifier unit is essentially a chemical reactor, where several thermo-chemical processes such as pyrolysis, combustion, and reduction take place.

We are leading manufacturer and supplier of briquetting press.

We are leading manufacturer and exporter of biomass dryer like Flash Dryers, Batch Type Dryer and Wood Chips Dryer etc.

We are leading manufacturer and supplier of Downdraft Gasifier. In this type, air is introduced into downward flowing packed bed or solid fuels and gas is drawn off at the bottom. A lower overall efficiency and difficulties in handling higher moisture is the limitations in downdraft gas producers.

We are well known for manufacturing and supplying of Updraft Gasifier. An updraft gasifier has clearly defined zones for partial combustion, reduction, and pyrolysis. Air is introduced at the bottom and act as countercurrent to fuel flow. The gas is drawn at higher location.

We deals in manufacturing and supplying of Universal Gasifier. These gasifiers are based on entrained-flow principle and have the ability to convert a practically any biomass into high quality producer gas with negligible tars.

We are well known for manufacturing and supplying of Infinite Briquetting Plants.

We deals in manufacturing and supplying of Infinite Impact Briquettors.