Jyoti Rubber Udyog (I) Ltd Ajmeri Gate, Delhi

Used for suction of water under low pressure and finds it's use in irrigation, dam projects, agriculture, Excavation of mines and dewatering operations of general nature

Designed for heavy duty water suction and discharge service, where rugged yet flexible hose is required both for dewatering and delivery purposes during excavation of mines, project construction, deflooding operations and for handling sewerage, waste water and mud. Type of Hoses : Type 1-Hoses with rough bore, Type 2-Hose with smooth bore.If the liquids are non-corrosive and do not carry solids in suspension, as in the case with muddy water, rough bore is used; in other cases smooth bore is used;

Used for suction of water under low pressure and finds it's use in irrigation, dam projects, agriculture, Excavation of mines and dewatering operations of general nature.

Silicone rubber sheet Recommended for use at extra high temperature ranging from – 40 0F to + 900 0F, sheets offered in Moulded finish in thickness of 1.5mm to 12.5 mm in 1mt width and length up to 3mts

Thickness : 1.5mm to 12.5 mm

Silicone rubber Recommended for use at extra high temperature ranging from – 40 0F to + 900 0F sheets offered in Moulded finish in thickness of 1.5mm to 12.5 mm in 1mt width and length up to 3mts.

Lining :Uniform Seamless lining of Natural or being of Natural and Synthetic rubber.Reinforcement : Plies of Woven textile or braiding of high strength synthetic fiberCover :Black, smooth or cloth marked finish of weather and abrasion resistant rubber cover for lasting performance while used under severe working conditions. In addition, for type 3 –B, the cover is highly resistant to oil & weather.

Recommended for use in steel mills, thermal plants, heavy engineering industries for conveying saturated steam at a specified pressure.

Gutter less design for cleaner compatibility reduces belt vibration and cleaner chatter for standard application with minimal slippage.Pulley lagging rubber sheets are used to eliminate belt slippage, increase pulley life, improve water shedding

Rubber composition: Manufactured out of Rubber compound of high quality Natural or Synthetic rubber or a blend thereof.Reinforcement: The reinforcement fabric used shall have a minimum breaking load of 120 Ncm width for both warp and weft direction.Color & finish: Unless otherwise specified, color shall be off-white having cloth marked finish on both surfaces

Width : 120 N/cm

It finds its application in almost every workshop, steel mill, ship building and Power Stations, Repair yards etc.

Jyoti Has the Distinction of Having Isi Certification Mark Licence for the Complete Range of Hoses Covering Both Woven Textiles & Braided Rayon Reinforcements for all Types I.e Type-i Type-ii & Type-iii.

It is used in almost every strategic concrete structure such as Dams, Canals, over HeadUnder Ground water tanks, swimming pools, Basement, Bridges, Road embankments, retaining walls, high rising multi storeyed buildings.its basic advantage is in its time of fixing. It works as a sealant and it is fixed on predetermined place while concrete slab is lain. It is easy to install. Easy to weld at site and at required angle and shape

Temperature : + 57o C

Thickness : 3 -12 mm

PVC mats Moisture proof, fire retardant, no adverse effect of acids, alkalis transformer oil & Diesel.Recommended for safety of workers on up to AC 66 KV & DC 240 V installations in all kinds of sub-stations operating HT, LT switchgears, control panels, transformer room, battery room, generator rooms and bus bar panels etc.

Lining : Uniform lining of suitable rubber compound resistant to all grades of petroleum and blended products having aromatic hydrocarbon content not more that 25%, Reinforcement : Plies of natural synthetic woven fabric rubberized with a suitable compound and two helical GS wires. (as per IS 28078) embedded in the reinforcement plies in the case of smooth bore and in rough bore hose, the first is internal and the second is embedded.Electrical Bonding : A copper wire comprising of a number of strands is embedded between the reinforcement plies to provided electrical continuity along the whole length of the hose.

This hose is specially manufauctured for dock and offshore operatoions of petroleum products containg not more than 25 % aromatic hydrocarbon content.

Nitrile rubber sheets are highly resistant to petroleum products and suitable for use at high temperature up to + 240 0F and also where food grade sheets are required. Calendered or press Moulded finish.

Thickness : 0.5 to 100.0 mm as per requirement of the customer

Size : 1mt*2mt in mould finish or long length from 0.5mm to 6.0mm thickness in calendered finish.

Neoprene rubber sheet of Rubber compound of high quality Natural or Synthetic rubber or a blend thereof.Sizes: thickness of sheet, permissible tolerances, number of fabric plies.

Recommended for safety of workers on up to AC 66 KV & DC 240 V installations in all kinds of sub-stations operating HT, LT switchgears, control panels, transformer room, battery room, generator rooms and bus bar panels etc.Moisture proof, fire retardant, no adverse effect of acids, alkalis transformer oil & Diesel.

Used for conveying hot water at a temperature below 1000C and at a pressure upto 7Kgcm2 in locomotives, steel mills and other industrial establishments of similar nature.

Used for conveying hot water at a temperature below 1000 C and at a pressure up to 7kg.fcm2 in locomotives. Steel mills and other industrial establishments of similar nature.Lining: Blend of Natural and Synthetic rubber compound smooth in bore, reasonably uniform in thickness, resistant to effect of hot water.Reinforcement: Synthetic yarn braided or rubberized woven fabric, natural or synthetic or a combination thereof.

Color : As required

Hot mat specially style for utilized in front high voltage instrumentation and change boards. Insulating rubber mat designed to guard for prime voltage shocks and used as aid equipments.

JYOTI has the distinction of having ISI Certification Mark Licence for the complete range of water hoses covered under IS:44487, both Woven Textile & Braided reinforcement.

Recommended for use at extra high temperature ranging from – 40 0F to + 900 0F, THICKNESS AND SIZE: sheets offered in Moulded finish in thickness of 1.5mm to 12.5 mm in 1mt width and length up to 3mts, SILICON HOSES: Vulcanized seamless hoses from 3mm NB up to 25mm NB in ling continuous lengths and mandrel built hose up to 18.5 mt. length from 6,, NB to 150mm NB

Thickness : 1.5mm to 12.5 mm

Width : 1mt

Length : 3mts

EPDM rubber sheet Rubber composition: Manufactured out of Rubber compound of high quality Natural or Synthetic rubber or a blend thereof. Reinforcement: The reinforcement fabric used shall have a minimum breaking load of 120 Ncm width for both warp and weft direction.Color & finish: Unless otherwise specified, color shall be off-white having cloth marked finish on both surfaces.