Labin Instruments Company Kirti Nagar, Delhi

  • Vacuum Oven

    Vacuum Oven

    Request for Price

     Product Description : Designed for desiccation, vacuum embedding, plating, process control, and inert atmosphere applications. Radiant warm wall heaters mounted outside of chamber to conserve chamber-working space and eliminate the hazards of open wire heaters. 3 (7.6 cm) glass wool insulation minimizes heat loss from chamber. Two piece stainless steel shelf systems improve heat conduction to samples and are easily removed for cleaning. Corrosion-resistant # 304 stainless steel interior. Tempered glass window in door allows viewing of samples. Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance. Durable powder coated heavy gauge steel exterior. It is available in 3 shapes ( circular , square , rectangular ) Operation : Digital Temperature Controller controls temperature from ambient +5°C to 200°C. Glass thermometer in working chamber displays actual temperature. Precise vacuum control to 30 (76.2 cm) Hg displayed on analog gauge. Secure door latch and continuous Silicon gaskets on vacuum chamber provide a tight seal and maintain a vacuum leak rate of less than 1 Hg per 24-hour period. Vacuum control and relief valves located on front of unit for convenient monitoring.

    ...more
    Get Best Price
  • Vacuum Casting Plants

    Vacuum Casting Plants

    Request for Price

    Being a quality centric organization, we are offering Vacuum Casting Plant. Our Vacuum Casting Plant has a special arrangement for degassing four flasks of size 4" Dia and 7" height at a time. The Vacuum Casting Plant is well-designed with a built-in timer with extra 15 amps in three pin socket for mixing investment powder. Vacuum Casting Plant is applicable to the casting of electrical products with filler or without filler. Also, Vacuum Casting Plant finds usage in vacuum drying, mixing or casting of polymer materials.

    ...more
    Get Best Price
  • Vacuum Casting Plant

    Vacuum Casting Plant

    Request for Price

    We offer a qualitative range of Vacuum Casting Plant that is made from supreme quality of raw material. We are one of the highly acclaimed Manufacturers, Exporters and Suppliers of Vacuum Casting Plant from New Delhi. We offer Vacuum Casting Plant at reasonable price with the following features: Special arrangement for degassing Four Flasks: Size 4" Diameter x 7" Height at a time. Built - in Timer with extra 15 Amps in 3 Pin Socket for mixing Investment Powder. All S. S., 232V, 500W LABIN Vulcanizer : With 2 Aluminium Plates, One Mould Plate for making 4 Dies at a time & Handle with Cutters. S. S. & M. S., 220V, 750W LABIN Wax Injector : With Four Aluminium Plates for Moulds, Two Spatulas, Wax Soldering Equipment and six 4"Dia. Rubber Base (Sprue) S. S. & Aluminium, 220V, 500W LABIN Burn Out Furnace : With Microprocessor Based Programmer, Tong for Flask and 2 Perforated Flasks. ( Size 4" Dia x 7" Height ) S. S., 220V, 3.5KW LABIN De Waxer : For 6 Flasks S. S., 220V, 1KW LABIN Electronic Gold Plating Unit : & FRP, 220V, 50W Load : 9 KW Load : 4.5 KW LABIN Annealing Furnace : Temp. 900 oC

    ...more
    Get Best Price
  • Thermocouple Calibration Furnace

    Thermocouple Calibration Furnace

    Request for Price

    We offering excellent grade Thermocouple Calibration Furnace. Constructed using a metallic sheath and high purity mineral oxide insulation, the Thermocouple Calibration Furnace comprises a number of concentric shells. Thermocouple Calibration Furnace possesses high insulation resistance making it suitable for most process applications in different laboratories. The precise design Thermocouple Calibration Furnace ensures a central zone of constant temperature.

    ...more
    Get Best Price
  • Thermal Shock Test Chamber

    Thermal Shock Test Chamber

    Request for Price

    We are involved in offering an exceptional quality range of Thermal Shock Test Chamber. Our clients can avail these chambers in different grades and dimensions as per their requirement and choice. We offer these chambers the market leading prices. These chambers are designed for safe and hassle-free operations. These chambers offered by us features rugged construction, optimum performance, corrosion resistant finish, low power consumption, shock proof and durable nature.

    ...more
    Get Best Price
  • Textile Testing Equipments

    Textile Testing Equipments

    Request for Price

    Get Best Price
  • Weight Per Litre Cup

    Weight Per Litre Cup

    Request for Price

    Specific gravity cup used to determine the specific weight per unit volume of a liquid at a given temperature. A stainless steel/aluminum precision instrument for determining the specific weight of paints and similar products. With a tolerance of 1% of the capacity the instrument is suitable for carrying out testing in accordance with ISO at 23±2o C and other standards like DIN 53217, ISO 2811, BS 3900 A19, IS 101 etc.Specifications 1000 SS : Stainless steel 100 CC 50 SS : Stainless steel 50 CC

    ...more
    Get Best Price
  • Semi Automatic Digital Ring and Ball Apparatus

    Semi Automatic Digital Ring and Ball Apparatus

    Request for Price

    This apparatus is meant for determination of softening point of bituminous materials. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. To determine the temperature at which sample of bituminous material loaded by 9.5mm dia steel ball, drops from a specified distance when heated under specified conditions.

    ...more
    Get Best Price
  • Saybolt Viscometer Apparatus

    Saybolt Viscometer Apparatus

    Request for Price

    Saybolt Viscosity of petroleum products at specified temperatures between 70oF and 210 F. This is also used for determining the Saybolt Furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450°F. It comprises one each of Cylindrical Oil Cup, Universal Tip, Furol Tip, Bath fitted with immersion heater mounted on a stand, Dimmerstat for temperature control, Stirrer with shield. Apparatus is supplied complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level.

    ...more
    Get Best Price
  • Salt Spray Test Chamber

    Salt Spray Test Chamber

    Request for Price

    The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts. Test Chamber :It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP Moulded Sheet. The upper part (triangular shaped lid made of FRP with acrylic glass window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested. Air-Saturator :It is provided to supply heated and humidified clean air, over 90% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator. Air Regulator :The Air Regulator will maintain a constant pressure of Air at 70 to 170 Kpa.Air Filter :The compressed air will be passed through a Filter Arrangement to remove all traces of oil and solid matters before sent to the saturation tower.Lid Sealing :Lid Sealing through Water Seal Method.Mist Dispersion Atomizer :Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Compressed Air and Gravity Process will help for creation Fog through Atomizer.Heating System :The Temperature within the Chamber maintained by Heater with Blower System, which provided in-between the Exterior and Interior walls.Solution Supply Tank :Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP Moulded Sheet.Mist Collector :Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders.pH Indicator :pH Indicator is inbuilt in Control Panel.Control Panel :Separate Control Panel will be provided located on the Trolley. The Control Panel will house : RH and Temperature Controllers-cum-Indicator for Main Chamber. PID Temperature Controller-cum-Indicator for Air Saturating Tower. PID Temperature Controller-cum-Indicator for Solution Tank. Weekly Programmable Timer, Hour Meter, ON/OFF Switches, Fuses, Electronic Relays and Indicating.Lamps. pH Indicator. Material :Control Panel, Stand and the Chamber containing other accessories of the Equipment will be made of Stainless Steel 304 grade. Wiring :All wiring will be as IS code. Channel type wiring will be done with suitable current rated copper wires.Power Supply : 220/240 V, 50 Hz, Single Phase, AC Mains.Safety Device : Cut-out at the time of water shortage in air saturator. Cut-out at the time of over current in control devices. Low Water Level Controller with Mechanical Floats type-Refilling Arrangement. Pre Installation Facilities to be required at user’s premises : Power Supply – Single Phase or Three Phases. Drainage System. Compressed Air. Distilled Water Reservoir or R.O. Reservoir as per user’s Test Requirement.

    ...more
    Get Best Price
  • Rain Spray Test Chamber

    Rain Spray Test Chamber

    Request for Price

    The Rain Spray Test Chamber is specially designed to determine the suitability of electronic and electrical components used under rain conditions. We are trusted Manufacturer, Exporter and Supplier of Rain Spray Test Chamber from New Delhi, India. Double walled chamber and leak proof design makes the Rain Spray Test Chamber the first choice among customers. Two gaskets, one on the Rain Spray Test Chamber and the other one for leak proofing at the door, are fitted.   Description : The updated model of Water / Rain Spray Chamber specially designed to determine suitability of electronic and electrical components driving under rain conditions. Construction : Double Wall and leak proof Exterior Chamber : Made of 18swg CRC Mild Steel Sheet with three coats of paint Interior Chamber : Made of 18swg Stainless Steel Sheet Bottom Tank : Made of 18swg Stainless Steel Sheet and is mounted on the Trolley below the Main Chamber. Portability : Trolley mounting with casters for easy portability. Drainage System : The Chamber will be provided with Tapered Drain Holes to drain out the water accumulated inside the Chamber. Door : A full front opening door, double walled insulated and interior lined with Stainless Steel will be provided for ensuring full access to the working space inside the chamber. Gasket : Two gaskets, one on the chamber and the other one for leak proofing at the door, are fitted. Locking System : The door is also provided with heavy duty hinges & ratchet type locking system. Viewing Window : A viewing window of 30 x 30cms will be provided on the door. Interior Inspection LampAn interior inspection light is fixed inside the interior chamber. Water / Rain Spray NozzlesWater / Rain spray nozzles will be provided as per standard JSS 55555 to give the water/rain rate of 4 to 10 mm/minute. Four nos. of nozzles at the top Four Corners included 45° and four nos. nozzles in the centre of each four sides. The distance of the nozzles can be adjusted from the test specimen if required. Pressure Gauges Separate pressure gauge will be provided for each spray nozzle, for indicating the pressure of the nozzles at the nozzles. The pressure gauges will be mounted on the panel and equivalent length of copper tubing which run to the nozzle end and the gauges will be calibrated accordingly.ChamberThe chamber will be provided with a cylinder in the centre with 8 nos. of sockets, which will be connected to the nozzle. The cylinder will be fed through a suitable pump to create the sufficient pressure with by-pass valve and the main valves will control the pressure in the cylinder which in turn controls the pressure at the nozzle tips. All the connections will be provided with compression fitting for leak proofing. The same water will be recirculated. Control Panel & WiringAt the right hand side or at the Top of the Chamber, a control panel will be fixed with all the controls, switches, fuses, contactor assemblies and indicating lamps etc. All the channel type wiring will be as per IS Code for suitable current rated copper wires. Safety Protection Back up fuse protection for mains, pump and geared motor. Overload protection for pump and geared motor. Safety Limit Switch will also be Provided.

    ...more
    Get Best Price
  • Mastic Asphalt Tester

    Mastic Asphalt Tester

    Request for Price

    This machine is used to determine the hardness of asphalt material the design features direct vertical loading with loading weight that rest on thrust bearings therefore load is applied to the specimen without transmitting shock to the loading column. At the end of the loading period the depth of penetration of the pin can be read form the dial gauge to an accuracy of 0.01mm. The thermostatically controlled heater unit has a built in impeller which circulates the water to maintain an even temperature throughout.

    ...more
    Get Best Price
  • Labin Heavy Duty Gold And Silver Melting Furnace

    Labin Heavy Duty Gold And Silver Melting Furnace

    Request for Price

    Get Best Price
  • jewelry manufacturing equipment

    jewelry manufacturing equipment

    Request for Price

    Get Best Price
  • Humidity Chamber For LR Cubes

    Humidity Chamber For LR Cubes

    Request for Price

    For maintaining a consistent temperature i.e. 50 ±2°C and Relative Humidity of minimum 90-95% ±3% in the mortar cubes, these cubes are to be kept in the Humidity Chamber for 24 hours before curing.

    ...more
    Get Best Price
  • HTHP Beaker Dyeing Machine

    HTHP Beaker Dyeing Machine

    Request for Price

    High Temperature High Pressure Beaker Dyeing Machine : Why Beaker Dyeing Machines?The Dyer must exactly know the quality of dyeing he may expect to have on his production machine. The cost of dyes, cloth and labor is too high to permit any experimentation with the Production Machines. The Dyer also wants to experiments with various combinations of recipes to get shades above the ordinary.   Why LABIN Beaker Dyeing Machines? The Dyer wants to transfer the experimental results directly on the Production Machines without any adjustment and this is where LABIN Machines become more important. Our Machines are characterized by their ability to exactly do that. The critical test is to put the same recipe in all the Beakers of the Machine and after dyeing to check up whether the shades in all the beakers are identical. LABIN Machines are sure to pass this test without a shade of doubt. While designing the Beaker Dyeing Machines, we have assumed that in laboratories there are no maintenance personnel and hence the Machines should work with practically no maintenance. Also important point is that high temperature can only be achieved by use of pressure either in dye pot or vessel. Construction: All the Dyeing pots are made from stainless steel 316 and rest of the equipment from stainless steel 304. The Machine is complete with their own stand. Only outer body panel and stand are made from mild steel.

    ...more
    Get Best Price
  • Hot and Cold Test Chamber

    Hot and Cold Test Chamber

    Request for Price

    Extensively used for endurance testing in the automobile industry, our Hot and Cold Test Chamber has huge demand in both the national and international market. The company stands tall among the best Manufacturer, Exporter and Supplier of Hot and Cold Test Chamber from New Delhi, India. Control panels are provided at the top of the Hot and Cold Test Chamber with all the required accessories. Customers can buy the Test Chamber at market leading rates.   ConstructionThis is double walled cabinet insulated with 125mm thick puff / fiber glass insulation between interior and exterior walls. Outer chamber made of Mild Steel/Stainless Steel and painted in Epoxy Powder coating in different color. The inner chamber shall be made of Stainless Steel 304 grade. Outer double walled metal door with GASKET and lock & key. The chamber will have strong base for fitting your fixture. This chamber shall be supplied with PID temperature controller. It will incorporate one compressor/double compressor cascade with all its protective devices along with two fan cooled condensing coil just below the working chamber. This chamber will have air circulating fan from the back of the cabinet. The chamber will have 3” diameter hole from one/both side for feeding cables. Control panel shall be provided at the top of the chamber with all required accessories.   Usage of Machine : Machine is used for endurance testing in Automobile Industry.

    ...more
    Get Best Price
  • High Temperature Muffle Furnaces

    High Temperature Muffle Furnaces

    Request for Price

    We can provide High Temperature Muffle Furnace from 900oC to 1600oC temperatures. Our High Temperature Muffle Furnace is well-acknowledged among the customers for reliability, accuracy and energy efficient feature. The High Temperature Muffle Furnace is used in Research & Development laboratories for different applications like ash determination, heat treating, fusions, glass & enamel tests, drying precipitates and many more. Our High Temperature Muffle Furnace is insulated with Ceramic Fiber Blanket of high density for excellent insulation. The High Temperature Muffle Furnace, offered by us, is efficient in operating continuously in the given working temperature without causing any trouble. Moreover, our High Temperature Muffle Furnace is a tabletop model which is light in weight, compact and elegant in design.Programmer : Microprocessor Based Programmer Computer Interfacing : Computer Interfacing is also available with RS-232

    ...more
    Get Best Price
  • High Temperature Muffle Furnace

    High Temperature Muffle Furnace

    Request for Price

    LABIN Box Furnace is the choice of Research and Development Laboratories that need a reliable, Energy-efficient, Accurate and Automatic Furnaces for a wide range of applications such as ash determination, heat treating, fusions, glass and enamel tests, drying precipitates etc. The furnace is insulated with Ceramic Fiber Blanket of high density for better insulation. It can run continuously at the given working temperature, trouble free. The furnace is quick heating type, light in weight, table-mounting type, and compact and elegant in design. The hinged type door is insulated with ceramic fiber to avoid heat loss from the door. The furnace is fitted with Digital Temperature Controller-cum-Indicator to avoid over heating for long life and trouble free working. Separate control panel will be provided.   Precise Control (Optional) : PID Controller which displays both set and accurate temperature and include one ramp to set point  Programmer : Microprocessor Based Programmer Computer Interfacing : Computer Interfacing is also available with RS-232

    ...more
    Get Best Price
  • High Temperature Laboratory Oven

    High Temperature Laboratory Oven

    Request for Price

    LABIN introduces updated Bench Models and Floor Models of High Temperature Oven for Research Laboratories, Production Departments. Ideal for most Aging, Sterilizing, Drying, Curing, Conditioning, Electronics Burn-in, Life Testing and Temperature Applications.   Equipment : Solid State Temperature Controlled Oven where the ultimate in precision is required.Exterior Chamber : Exterior Chamber is made  of Stainless Steel/Heavy Duty Mild Steel, treated for rust prevention and given a long-lasting baked enamel finish.Interior Chamber : Interior Chamber is rugged and made of Heavy Duty long lasting stainless steel.Insulation : Pre-compressed 4” thick Ceramic Blanket insulation surrounds entire chamber which prevents ‘settling’ and possible heat loss and is impervious to corrosive fumes and vapours.Homogeneous Circulation : Heavy Duty Air Circulation Fans provide homogeneous air circulation throughout the entire chamber.High Temperature Laboratory Oven Door Construction : Double walled full front opening door and a small window type door, exterior wall of stainless steel/mild steel and interior of stainless steel and insulated with pre-compressed ceramic blanket. Hinges &Latches : The door is also provided with Heavy duty Hinges with Toggle Type Locking Arrangement. Heating Elements : Efficient tubular/nickel chromium coils wound on porcelain refractories maintain low surface temperature even while operating at highest range settings.Temperature Control : To control the temperature inside the chamber, a electronic PID digital temperature controller-cum-indicator is equipped with the Oven.Over – Temperature Protection : Automatic over-temperature Thermostat protects against excessive temperature and damage. The Thermostat is independently circuited and is adjustable for high temperature protection at any point in the operating range.

    ...more
    Get Best Price
  • Heat of Hydration Apparatus

    Heat of Hydration Apparatus

    Request for Price

    Heat of Hydration apparatus is used for determining heat of hydration of cements by measuring difference between heat of solution of dry cement and heat of solution of a separate sample partially hydrated for 7 days & 28 days. Constant-speed stirrer maintains uniform temperature throughout liquid and supplies sufficient agitation to keep solid reactant suspended in the acid mixture. This equipment consists of insulated wood case, vacuum jar with stopper; thermometer plus holder, glass funnel; stirring paddle and chuck.

    ...more
    Get Best Price
  • Gsm Round Cutter

    Gsm Round Cutter

    Request for Price

    In order to known about the GSM (Gram Square Meter) of the textile of any type, GSM Round Cutter should be used. It gives accurate result and is highly cost effective. GSM Round Cutter can be used for virtually any type of material including Film, Foam, Carpet, Paper and Board. We are a notable Manufacturer, Exporter and Supplier of GSM Round Cutter from New Delhi. Our exclusive range of GSM Round Cutter can be purchased from us at market leading prices.   Round Cutter : To determine the GSM of the Textiles (Woven, non-Woven or Knitted Fabric) a specialized Instrument is used which is called Round Cutter for GSM. LABIN Round Cutter can be used for virtually any type of material including Film, Foam, Carpet, Paper and Board.   Equipment : The Equipment consists of Round Cutter fixed on a Metallic Base having side Locking System. The Cutting Pad is also fixed on the Base Frame. As the Cutter is lifted, it automatically gets locked in the upright position. Now you can place the Fabric conveniently on the Cutting Pad. As you release the Lock, the Cutter gets in the Original Position on the Fabric. The Specimen will cut out neatly and accurately by rotating the Hand wheel.The Round Cutter has four German Blades and the Cutting Pad. The Cutting Pad is a special type of Pad, which takes just any kind of Fabric. The Blades are reversible type. When Blade's one side gets rough by using, the Blade can be turned to the other side. Turning to other side can use all the four sides of the Blade.The GSM Round Cutter is recommended for yield Testing i.e. the determination of weight per unit area. The Sample Cutter cuts out rapidly and accurately circular specimens of 100 cm², which is exactly one hundredth of square meter, the result in grams, multiplied by 100, gives us grams per square meter.Calculation : Grams per Square Meter = Specimen Weight in Grams x 100The Equipment is supplied with : Round Cutter along with Side Locking System on a sturdy Base Frame. One extra Cutting Pad. P. S .: The only parts to be replaced, with the use of the Round Cutter, is Blades and the Cutting Pad.

    ...more
    Get Best Price
  • Gold Melting Furnace

    Gold Melting Furnace

    Request for Price

    Recently, we have introduced Gold/Silver Melting Furnace which is very useful for Jewellery manufacturers and Showroom owners because of the following properties : Wastage of Gold/Silver contents is zero percent.  Electrical expenses are very reasonable.  There is no chattering, no need to use Suhaga.  Melting time of Gold/Silver is very low. Working with this Furnace is in Pollution Free Atmosphere. The Cost of Furnace can be recovered within month by saving Wastage.  Uniform & Perfect Melting in one melting.  It is very easy to use and maintenance free. Thus, it lowers the overall jewellery manufacturing expenses due to above factors. The leaflet and other technical details of the Gold/Silver Melting Furnace are enclosed herewith for your reference. Capacity : Up to 1 Kg (Gold/Silver can melt from 10 gm to 1 kg) or as per customer’s requirements.   Maximum Temperature : 1200oC 1500oC   Models : Economy Model (With 4-Elements) Model for Mass Production (With 6-Elements) Melting Furnace will be supplied with following    Accessories : Control Panel with Digital Electronic Temperature Controller-cum-Indicator. A set of Crucible (Kothali) having capacity of: (1) 250gms (2) 500gms (3) 1 Kg Crucibles will be made up of Graphite having property of non-sticking to metal (Gold/Silver). A heavy gauge Tong with easy handle grip for lifting crucibles. A mixing rod of Graphite. f. A holder for holding mixing rod. The Furnace can be used in air-conditioned Showroom also due to its property of non emission of Pollution i.e. smoke, noise, smell & heat.  Note : We also manufacture Complete Casting Plant inclusive of Vacuum Casting Unit, Burn Out Furnace, De-waxing Unit, Wax Injector, Vulcanizer, Digital Magnetic Finishing (Magnetic Polisher) and other instruments related with Jewellery Manufacturing.

    ...more
    Get Best Price
  • Glass Thermometer Calibration Bath

    Glass Thermometer Calibration Bath

    Request for Price

    Why is Calibration necessary? Temperature can not be measured entirely without error, so it is necessary to quantify these errors by calibration of the probe, with or without its associated display against the reference standard in the respective temperature range. Calibration is essential where traceability to a National Standard or International Standard in compliance to industrial requirement in ISO-9000 specification. Labin Temperature Heating/Water/Cooling/Clinical Baths may be used for temperature application like Calibration Measurement and Comparison of the Thermometers and Associate Instruments in the given range -50 C to +300 C. An electronic proportional band control adapts the heat supplied to the bath for thermal stability and uniformity requirements of the Bath for Comparison/Calibration.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Exporters / Wholesale Suppliers
  • Year of Establishment 1993

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Labin Instruments Company is Manufacturers of Salt Spray Test Chamber, Environmental Test Chamber, Glass Thermometer Calibration Bath, Thermocouple Calibration Furnace, Dry Block Calibrator, Fluidized Calibration Bath, High Temperature Muffle Furnaces, Vacuum Casting Plants, Digital Washing Fastness Testers, Hot and Cold Test Chamber from Delhi.
Read More »

Contact Information

Labin Instruments Company

  • Mr. P K Solanki
  • B 30, DSIIDC Complex, Kirti Nagar, Industrial Area, Delhi
top