Proximity Switches Dealers in Delhi (58 products available)

Category : Capacitive Fluid Level Sensors

Actuation : Capacitive

Backlighting: : Backlighting:

Capacitive Fluid Level Sensors easily mount to the outside of a container and measure through almost any non-metallic material. They are custom designed and optimized for a range of applications such as medical devices, pump controls, beverage machines etc. A design can use a traditional printed circuit board for a flat surface, or a thin, flexible circuit to accommodate curved surfaces or space-constrained applications. The sensor includes customized embedded software which can be configured for auto-calibration for easy installation, or manual calibration to maximize the accuracy.

Type : Photoelectric Sensor

Material : Case Polybutylene Terephthalate (PBT) Lens Denatured Polyarylate

Voltage : 12 To 24 VDC 10 Percent Ripple (p-p)

Brand Name : Omron

Output : NPN NO+NC

Application : Industrial

Brand Name : OZO

Model Number : E3Z-D61

Item Code : E3Z-D61

Shape : Miniature

Short Circuit Protection : Output short-circuit protection,Output reverse polarity protection,Power supply reverse polarity p

Weight : Approx. 65 g

IP Rating : IEC IP67

Sensor Type : Diffuse-reflective

Dielectric Strength : 1000 VAC 50/60 Hz 1 min

Insulation Resistance : 20 M ohm min.(500 VDC megger)

Sensing Range Max : 100mm

Supply Voltage DC Min : 12V

Supply Voltage DC Max : 24V

Output Current : 100mA

Product Range : E3Z Series

Switch Type : Photoelectric

Sensing Distance : 5-10MM

The wireless capacitive proximity sensor connects with a non-contacting capacitive sensor to detect objects as well as water levels and the full/vacancy level of liquid soaps and tissues.

Available in all sizes Type: Inductive, Capacitive ACDC

Diameter : 18 mm

Brand Name : Sick

Ambient Operating Temperature : -25 deg C … +80 deg C

Sensing Range : 3 mm … 12 mm

Thread Size : M18 x 1

Switching Frequency : 30 Hz

Supply Voltage : 10 V DC … 36 V DC

Safe Sensing Range : 8.64 mm

Housing : Cylindrical Thread Design

Enclosure Rating : IP67

Current Consumption : 10 mA

Switch Type : Photocell

Brand Name : Crystal

Application : Street Light

Warranty : 12 Months

Current Rating : 1000 Watts

Feature : Durable, Robust, Wear proof , Weather resistant, Astute performance, Efficient

PNP/NPN- M-8x45,FM / NFM : CE & IP-67 Approved

Input Voltage----5-40 VDC : Max. Load Current----300mAmp.

Sensing Distance----1.5-2.5mm : Logic ; NO/NC/NO+NC

We are offering paras proximity switch, sensors etc.parasnath electronics is one of the leading manufacturer supplier and exporter of different types of proximity switches such as inductivephoto-electricmagneticcapacitiveldr type, float switches, flow switches, magnetic door contact for security systems, signal isolators and smps (switching mode power supplies) etc. we also mfg. Control pcb card and its sensors for the vehicle tracking for petrol & diesel trucks etc. we are mfg. Of all types of sensors -inductive, magnetic,intrinsically safe,photo electric,capacitive,ldr type,float,flow switches, smps, relay cards. product specification:-inductive proximity switches dc type ( 2 wire & 3 wire & 4 wire) 1. size : m-5 to m-80 mm (barrel shaped) 2. type : npn pnp 3. output logic : no nc no+nc 4. mounting : flush type non flush type inductive proximity switches ac type ( 2 wire) 1. size : m-12 to m-80 mm (barrel shaped) 2. type : ac 3. output logic : no nc 4. mounting : flush type non flush type inductive proximity switches dc type ( 2 wire & 3 wire & 4 wire) 1. size : rectangular type 2. type : npn pnp 3. output logic : no nc no+nc 4. sensing distance : 0.75mm to 45mm ce & ip-67 approved.

Material : Heat resistant ABS

Protection : IP54

Output Current : 200 mA

Usage : Position Sensor

Detection Distance : 10mm+-10%

Tube Buck : 2.5 V

Switch Type : Inductive

Material : Stainless Steel

Brand Name : Osna

Shape : Cylindrical

Pack Type : Box

Power/Voltage (V) : 240 V

DayNight Sensor can automatically turn on or off lights at dusk and dawn. It is not only convenient but also practical; it can control the lighting loads by working only at night. Examples of use are street lights, office lights, warehouse and factory lights, garden lights, etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.

Switch Type : Photoelectric

Brand Name : Anchor

Shape : Square

Application : Home

Input Power : 220 AC Supply

Power Supply : 220 AC Supply

Nutronics India is the India's premier developer and manufacturer of start-to-finish Industrial PROXIMITY SWITCHES.

Sensing Distance : 4 mm

Output Type : PNP

Supply Voltage : 10-30 V

Switching Frequency : 1 KHz

Connection Type : Connector M12

Number of Wires : 2 Wire

Body Material : Stainless Steel

Body Style : Barrel

Installation : Flush

Degree of Protection : IP67

Brand Name : Topworx go

Current Rating : Single Pole Double Throw (SPDT)

Shape : Square

Sensing Distance : Operating temperature - 10 mm (3/8 in) sensing distance

Cable Length : as per requirement

Voltage : 12-24 V

Material : ABS

Sensing Distance : (5mm

Model Name/Number : E3Z-D81

Size/Dimension : 10.8 x 20 x 31mm

Brand : Omron

Shape : Cuboid

Response Time : 1 ms

IP Rating : IP67

Sensor Type : Diffuse reflective

Light Source : Infrared light

Cable Length : 2 meter

Switch Diameter (mm) : 8,12,18

Inductive Proximity Switches are solid state switching devices based on Eddy Current Loss Principle. An alternating electromagnetic Field is developed at the sensing face of the proximity switch. When any metallic object enters this field the eddy current increase. The amplitude of the oscillations of electro magnetic field is consequently reduced. This reduction in amplitude is processed and an output stage is switched on or off. For DC switches this output stage is either a PNP or NPN transistor and For AC switches it is a Thyristor.

Long Distance Cylindrical It can detect any object without contact, Metallic, non-metallic, glass, wood, water, human, oil, plastic anything. Sensing distance would be 3mm to 25mm. Choice of operating voltage :24VDC or 110220VAC.

We offer Inductive Proximity Switch. Application, design and mode of operation: A proximity switch is a device which causes a switching action without physical contact. SCHMERSAL proximity switches respond to targets that come within the active range of their generated sensing fields. These units are completely self-contained, and house a field generator, amplifier, and other necessary circuitry to accomplish electronic switching. The units are all solid state and have no moving parts that can wear out. The electronic switches are not susceptible to contact contamination, contact erosion, or material transfer as are mechanical switches. Their service life, within their specified ratings, is virtually unlimited. The switching is insensitive to vibration, and is positive (full step function) without chatter, regardles of how slowly the target approaches or recedes from the sensor.

Switching Mode : NO/NC

Sensing Distance : 2 mm

Output Type : NPN

Voltage Range : 10-35VDC

Sensing Range : 8mm

No. Load Current : 200mA

PS-919 (Panic Switch) Panic Switch Surface Mount Type Push Button Function Electrical Rating 230 V ACDC, 4 Amp. Option for EmergencyExit Marking on the Button NONC both contact option available.

Outer Diameter  :     micro switch square shape

   sensing range  :      4  mm 

   Operating Voltage :      5-40 VDC 

   Max Load Current :      300mA

    Output  :      PNP NC  3 wire 

    Housing length  :      PVC

   Cable Length (Approx.) :      2 m

    Mounting      :      flush 

    Housing  :      PVC body

    Package Content :     1 x Micro switch Sensor Switch

Switch Type : Inductive

Brand Name : Honeywell

Shape : Cylindrical

Sensing Distance : 10mm

Model Name/Number : AA18APA10C

Usage/Application : Industrial

Features : Easy to install ,Compact design , Sturdy construction, Thermal stability , Enhanced functional life, High functionality.

Features : Light weight ,Dimensional accuracy ,Fine finish ,Strong built ,Sturdy design ,User friendly.

Operating Voltage : 80-250 V

In modern world day after day technology is changing very fast and we have to keep in pace with present technology. Sensors made in yester years.were little bigger in size, hence, with vigorous thought we successfully innovated more than 300 sensors of small sructure. These sensors are not only accomodative but also good for users. These are direct one to one replacement for many imported switches and are widely used in stacking positions, detecting print marks on packaging papers on auto-packaging machines or paper reels on cutting machines, toothpaste filling machines and general with those system which requires positioning of the print mark, Housed in plastic body with replacable S.S. plunger assembly. The S.S. plunger as a positive stopper for Pneumatic and Robotic assemblies and has direct input protection upto 2 tones. Stroke length can be adjusted precisely.

Switch Type : Proximity

Material : SS

Application : Industrial

Finishing : Polished