SPECTRUM MEDICAL INDUSTRIES PVT. LTD Rohini, Delhi

 Efficiency – The Pictus 700 incorporates a 95 position patient sample tray reducing the number of required daily runs. It also has programmable auto dilution for out of range tests. The reagents are very stable requiring few calibrations thus saving time and money. The 72 reagent positions (75 w/ISE) and onboard refrigeration allow for many tests to be kept on the analyzer at the same time. Cost Savings – The P-700 does not need an expensive water treatment that requires expensive upfront cost and continual purchase of filters. More savings will be realized by utilizing low cost reagent, calibrator and controls reducing the overall cost per reportable result. Furthermore, the extended service pricing is comparatively low versus other models of this type. Easy to Operate – The Pictus 700 utilizes Windows based software for its operation and is very intuitive with barcoding for sample and reagent identification. It also accepts many sizes of primary tubes. Periodic maintenance is minimal and is easy to perform. Space Utilization – The P-700, although a floor model, takes surprisingly little space in the laboratory.  Specifications  Up to 600 tests/hour, max. 800 tests/hour with optional ISE unit Sample volume – 2 to 100 μl/tests (in increments of 0.2 μl) Sample tray – 95 (5 racks x 19 positions) ID barcode equipped positions for routine, stat and control samples and standard solutions 1 to 3 reagents, 2 to 480 μl/tests each (in increments of 1μl) final total solution volume 180 to 650 μl/test Reagent bottle capacities – 72 cooled positions Multi-Functional Probes Sample Clot, Impact, Liquid Level Sensors Reflex Testing Barcode Reader for reagents & Sample Water consumption – less than 5L/hour Dual beam photometer Automatic pre-dilution and post dilution (ratio 1:5 to 1:100) Full quality control – Levey-Jennings plots, Westgaard multi-rules Windows-based software Optional: ISE Module 4Parameters,

Key Features and Benefits  Cost Effective – With low instrument cost, low cost reagents, and reusable cuvettes, the P400 provides one of the lowest cost reportable results the industry has to offer. Easy to Operate – The system utilizes Windows based software, barcodes for sample and patient identification, and primary tube sample capability to provide for the ultimate ease of use. Intelligent Sample Management – The multi-function probe offers crash detection, liquid level sensing, while mixing and pre-heat reagents when necessary. Space Saving-The P400 requires only 85 cm of bench space and has a built in power supply. With a depth measuring under 58 cm, it easily fits on most all laboratory counter tops. Large Data Management Capability – QC package includes Levy-Jennings plots and Westgaard rules and stores up to 100,000 patient results on board. World Class Optical System: Double Beam Photometer, Linear up to 3.600 au. Double Beam Photometer 48 Sample & 48 Reagent Positions Probe with Capacitive Liquid Level Sensor, Reagent Pre-Heating & Mixer. On-Board Cooled Reagent Positions, Samples Position with continous loading. Multi-Stage Cuvette Washing & Drying. Low cost Re-Usable Long Life Reaction Cuvette. DI Water requirement 1Lit/500Tests. Thru-put 300 T/hr. w/o ISE,400 T/hr. with ISE  

he P500 is a bench top, fully automated Clinical Chemistry system comprised of advanced Windows-based software, state of the art components and user-friendly interface provide a long life platform for analytical excellence. The system includes a full range of reagents, controls and calibrators. Throughput (tests/hour) 300, 480 with ISE Sample Racks/Positions per rack:  5 / 19 (95 Sample On Board) Sample volume (μL): 2 – 100 Optional direct 4-ISE module Reaction volume (μL): 180 – 500 PMMA reusable/single use cuvettes on board (in segments of five): 80 Time to first result (seconds): 45 Serum, plasma, urine, CSF and other sample types can be used Refrigerated reagent tray: 7 – 9 ⁰C Refrigerated on-board single reagents/tests: 72 Water Consumption (Litre/hour) ≈2 Up to 3 different reagents per test Internal Barcode Reader for samples, sectors and reagents Crash and collision detection Reflex Testing Reagent pre-heater Sample Clot detection QC:  graphical and statistical; Westgaard rules indicated, Levey-Jennings plots, twin QC and box whisker plots Weight (kg/lbs) 115 / 253 Dimensions (Width x Depth x Height) (cm) 90 x 66 x 62 https://www.youtube.com/watch?v=oaneTQTqfMM

Ideal for pediatric use Special mode for POC Smallest reagent consumption Capillary measurement         The Icon 3 is a smart, 3-part differential hematology analyzer that sets new standards in terms of features, functions and style. This iconic laboratory device combines cutting edge technology with a fresh and elegant design. The Icon 3 provides a 22-parameter complete cell blood count report that includes histograms for WBC, RBC and PLT.   Icon-3/V-Counter operates based on micro-fluidic technology. As a result, it uses 80% less reagents than traditional hematology analyzers. This compact device takes as much desk space as an A4 paper sheet. Icon 3 has a footprint of an A4 sheet of paper – probably the smallest dimensions of its class worldwide. Icon 3 is a hematology analyzer based on microfluidic components. This cutting edge technology enables reducing reagent consumption by approx. 80% compared with analyzers built on the decades-old traditional technology. Despite its ultra-compact sizing Icon 3 has a throughput of 60 samples per hour*. Icon 3 can process closed or open vials. Icon 3 aspirates 9.6µL whole blood* but actually uses only 2.4µL –  the smallest sample volume ever processed by a hematology analyzer. This space-saving device has a 10 inch high resolution touch screen user interface that can handle motion sensing gestures – an entirely new interaction experience with the unit. Icon 3 is designed to be remote-supported. System check, trouble shooting, software upgrade can be carried out at the user’s site at any time if internet access is available. Small reagent volumes help keep down the wasteful, polluting usage of laboratory chemicals. By eliminating the need of transporting tons of reagents to long distances and using a “green” result printing concept Icon helps saving a significant part of the running expenses, keeping cost per test low and protecting the environment

User programmable Test Program Memory. Random Access Operation & Profile Programming. Extensive Quality Control Program with LJ Graph High Quality Long Life Interference Filters. Modular digital electronic circuit, auto-calibration & gain adjustment. World Class Photocell with extended WL range covers 320~1000nm Photometric Linearity up to 4.000au. Repairable, Metallic Micro-Flow Cell Selection of Manual Cuvette Position by sliding the flow cell Bi-Directional Peristaltic Pump Durable Thermal Line Printer Over 1000 installation & proven performance

User programmable Over 200Test. Over 2500Test Result & 4000Q.C. Result Memory. Built-in Q.C. Program. Reagent Blank Memory. Large Back Lighted Display with Touch Screen. Built-In Thermal Graphic Line Printer. High Quality Long Life 7 Interference Filters with One Option. Long Life Halogen Lamp with Lamp Saver Feature. Photometric Linearity up to 3.000au. Flow Cell & Manual Cuvette Measurement & Co-agulation Cuvette. Built in Port for RS-232C.

The applications are designed with excellent sensitivity, precision and extended linearity ranges.  The reagents are manufactured at an ISO 13485-certified facility, where they undergo extensive QC and performance testing.  Each lot is optimized to ensure minimum lot to lot variation and are cross matched to reference calibrators and controls. Most reagents have up to 24 months shelf life, 30 to 60 days on-board, open container stability and long life calibration curves. Key Features and Benefits Diatron/Medicon clinical chemistry – liquid and ready-to-use, bar coded reagent vials are specifically designed and optimized for use on the Diatron Pictus analyzers and can be loaded on the system without interrupting its operation. Reagent quality and stability that brings you savings!  Diatron clinical chemistry reagents are highly stable from 2*C to 15*C and require less frequent calibration than most others. They can remain on-board the analyzer un-capped, ready to use, to ensure the most efficient use of time and offer improved work-flows while delivering first class performance at all times. Extended assay ranges ensure fewer sample repeats, saving laboratory time and costs. All reagents are conveniently barcoded with bottle specific traceability and filled in optimized volumes to virtually eliminate waste. With reduced calibration frequency the lab saves reagent, calibrator and operator time.  A full line of verified and cross referenced calibrators and controls in appropriate sizes and formats are also available.  Designed to meet global regulatory and compliance standards, the design and performance of Diatron reagents exceed the most stringent customer requirements. Special Proteins: Diatron presents World Class performance from an extensive list of special protein reagents that are specifically designed and formulated to virtually eliminate the risk of Prozone/Hook effect from high levels of “antigens or antibodies” in samples. Many other reagents available in the market can be overwhelmed due to their less concentrated formulations and can  suffer from “reaction hook effect”. Thus, these more diluted reagents can generate inaccurate/misleading patient results. Another benefit of the Diatron Special Proteins reagents is that they are designed to avoid interference from HAMA (Human anti-Mouse antibodies), RF (Rheumatoid factor) or heterophilic antibodies and are formulated with a unique Ab-latex binding technology that provides the best performance and highest confidence available with any other immune-turbidimetric-based assays. Different kit size options are available to satisfy the needs of small to larger volume laboratories.

DESK TOP RANDOM ACCESS CHEMISTRY ANALYZER (Without Reagent Cooling & Cuvette Washing) World Class Optical System: Double Beam Photometer, Linear up to 3.600 au. Probe with Capacitive Liquid Level Sensor, Reagent Pre-Heating & Mixer. 48 Reagent & 48 Sample Position with removable disk to keep in refrigerator after Samples may be loaded in 75/100mm Primary Tube or Cup. 80 Re-Usable Long Life Reaction Cuvette. DI Water requirement 1Lit/500Tests. Thru-put 200 T/hr.