STP Limited Nehru Place, Delhi

Three component, semi-rigid epoxy for tile joints. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic. Semi-flexible formula that allows for limited temperature and humidity movement of concrete. • Tough performance reduces floor joint repairs and maintenance. • Suitable for filling cracks in older floors to reduce the rate of deterioration

ShaliBond S is a two component, solvent free, thixotropic, structural adhesive especially formulated for segmental bridge construction. ShaliBond S meets the requirements of FIP and ASTM D 648. High strength and high modulus of elasticity. • High initial and ultimate strength. • Impermeable to liquid and water vapour. • Suitable to dry and damp concrete surfaces (moisture tolerant). • Hardening is not affected by humidity. • Thixotropic:non sag in vertical and overhead application. • Solvent free. • Hardens without shrinkage. • No primer required. • Good chemical resistance.

Polysulphide polymer based, UV resistant, flexible, tear resistant, rubbery, self-leveling, pourable, non-staining sealant, which adheres to most of building materials like cementitious substrates, aluminum, glass, wood, mild steel etc. ShaliSeal® PS PG cures at ambient temperature, has excellent recovery characteristics after extended period of compression elongation with outstanding resistance to most chemicals, weather conditions, aging and shrinkage. Expansion joints in industrial, commercial or residential buildings. Joints in concrete roads, bridges, subways, flyovers & airport runway.

ShaliFloor M DH (formerly known as Shalimar Diamond Hard) is a dry shake, metallic floor hardener with cleaned and graded, non-oxidizing metallic aggregate in a high strength cementitious binder. Designed to be incorporated into fresh concrete slabs. ShaliFloor M DH provides a dense, tough surface capable of withstanding the abrasion and impact loading seen by floors slabs of numerous industrial and manufacturing facilities.

ShaliPoxy 400 is WRAS Approved Food Grade Epoxy Coating for internal coating of pipes, vessels and other equipments used for portable water. It conforms to BS 6920:2000 and AWWA C 210.

Type : Food Grade Epoxy Paint

Application : Brush, Roller, Spray Gun

Color : Dark Brown / Light Yellow

State : Liquid

Categories : Industrial

Country of Origin : India

Finish : Soft Sheen

Packaging Size : 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L

Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It is a closed cell and of cross linked structure. It has an excellent recovery of 95% (after compression upto 50%), which makes it the most suitable product for this application. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is rot free and contains no bitumen.

Density : 100.00 kg/m3

Two component penetrative epoxy based primer is suitable for priming concrete metal surfaces, including walls, prior to the application of any Epoxy Flooring, Epoxy Coating and Epoxy Repair Mortar

ShaliPoxy® CTE 410 is a two component; high build coal tar epoxy protective coating for steel and concrete surfaces having excellent corrosion chemical abrasion scratch resistance through 405 - 410 micron coating in single coat. The material is used as direct to metal application where no requirement of primer prior to the top coat. It conforms to AWWA C-210 : 2015, SSPC Paint 16 and Corp of Engineers C200 C200a.

Bitumen Impregnated Softboard Expansion Joint Filler In the wake of industrial revolution and liberalization, our economy has witnessed a huge growth in the industrial sector. Presently the diverse needs and demands of the industries are ever scaling, which needs appropriate Bitumen Impregnated Softboard Expansion Joint Filler.

ShaliPlast® Characteristics RCI is bipolar roving corrosion inhibiting concrete admixture for use in reinforced concrete and mortar. It meets the requirements for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete. It confirms to ASTM C1582 C1582M – 11.

ShaliUrethane® WP WC is an aliphatic resins based coating with high UV resistance property without cracking, peeling or turning yellow over a prolonged use. It offers good resistance to alkalies and mild acids and solvents. ShaliUrethane® WP WC has an extremely low water vapour absorption. ShaliUrethane® WP WC has a very good bonding with masonry and other material of construction. It is fast drying and breathable in nature

We are leading supplier of huge range of Acrylic Polymer Waterproofing Coating.

We deals in supplying of wide range of Extruded Polystyrene Thermal Insulation Board.

We are well known for supplying of wide variety of Water Based Bituminous Liquid Membrane.

A prominent supplier of huge range of Expansion Joint Tapes.

We are leading supplier of huge range of Crystalline Waterproofing System.

We deals in supplying of wide range of Bitumen Saturated Joint Filler Board.

We are leading supplier of huge range of Thermoplastic Road Marking Paint.

We deals in supplying of wide range of 2K Water Based Coloured Slurry Seal.

We are well known for supplying of wide variety of Epoxy Adhesives.

A prominent supplier of huge range of Bituminous Canal Lining Sealant.

We are leading supplier of huge range of Rubberised Bituminous Adhesive.

A prominent supplier of huge range of Two Component Etch Primer.

We are leading supplier of huge range of Processed Coal Tar.